J Jamari

Year	Citations
2026	371
2025	873
2024	894
2023	933
2022	648
2021	327
2020	219
2019	176
2018	151
2017	119
2016	86
2015	67
2014	40
2013	46
2012	38
2011	22
2010	25
2009	23
2008	12
2007	22

#	Article Details	Year
1	Tresca stress simulation of metal-on-metal total hip arthroplasty during normal walking activity Google Scholar 👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, I Akbar, ... 📚 Materials 14 (24), 7554, 2021	2021
2	The effect of bottom profile dimples on the femoral head on wear in metal-on-metal total hip arthroplasty Google Scholar 👨‍🔬 J Jamari, MI Ammarullah, APM Saad, A Syahrom, M Uddin, ... 📚 Journal of functional biomaterials 12 (2), 38, 2021	2021
3	Minimizing risk of failure from ceramic-on-ceramic total hip prosthesis by selecting ceramic materials based on tresca stress Google Scholar 👨‍🔬 MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, DB Wibowo, ... 📚 Sustainability 14 (20), 13413, 2022	2022
4	Computational contact pressure prediction of CoCrMo, SS 316L and Ti6Al4V femoral head against UHMWPE acetabular cup under gait cycle Google Scholar 👨‍🔬 J Jamari, MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, ... 📚 Journal of functional biomaterials 13 (2), 64, 2022	2022
5	An elastic–plastic contact model of ellipsoid bodies Google Scholar 👨‍🔬 J Jamari, DJ Schipper 📚 Tribology letters 21 (3), 262-271, 2006	2006
6	In silico contact pressure of metal-on-metal total hip implant with different materials subjected to gait loading Google Scholar 👨‍🔬 J Jamari, MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, ... 📚 Metals 12 (8), 1241, 2022	2022
7	Tresca stress study of CoCrMo-on-CoCrMo bearings based on body mass index using 2D computational model Google Scholar 👨‍🔬 MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, O Kurdi, ... 📚 J. Tribol 33, 31-38, 2022	2022
8	Experimental investigation of fully plastic contact of a sphere against a hard flat Google Scholar 👨‍🔬 J Jamari, DJ Schipper	2006
9	Adopted walking condition for computational simulation approach on bearing of hip joint prosthesis: Review over the past 30 years Google Scholar 👨‍🔬 J Jamari, MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, ... 📚 Heliyon 8 (12), 2022	2022
10	Analysis of contact pressure in a 3D model of dual-mobility hip joint prosthesis under a gait cycle Google Scholar 👨‍🔬 M Tauviqirrahman, MI Ammarullah, J Jamari, E Saputra, TI Winarni, ... 📚 Scientific reports 13 (1), 3564, 2023	2023
11	A study of surface texturing and boundary slip on improving the load support of lubricated parallel sliding contacts Google Scholar 👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper 📚 Acta mechanica 224 (2), 365-381, 2013	2013
12	The potential use of green mussel (Perna Viridis) shells for synthetic calcium carbonate polymorphs in biomaterials Google Scholar 👨‍🔬 R Ismail, DF Fitriyana, YI Santosa, S Nugroho, AJ Hakim, MS Al Mulqi, ... 📚 Journal of Crystal Growth 572, 126282, 2021	2021
13	Computer-aided reverse engineering system in the design and production of orthotic insole shoes for patients with diabetes Google Scholar 👨‍🔬 PW Anggoro, M Tauviqirrahman, J Jamari, AP Bayuseno, B Bawono, ... 📚 Cogent Engineering 5 (1), 1470916, 2018	2018
14	Performance comparison of Newtonian and non-Newtonian fluid on a heterogeneous slip/No-slip journal bearing system based on CFD-FSI method Google Scholar 👨‍🔬 M Tauviqirrahman, J Jamari, S Susilowati, C Pujiastuti, B Setiyana, ... 📚 Fluids 7 (7), 225, 2022	2022
15	Physiological effect of deep pressure in reducing anxiety of children with ASD during traveling: A public transportation setting Google Scholar 👨‍🔬 IY Afif, AR Manik, K Munthe, MI Maula, MI Ammarullah, J Jamari, ... 📚 Bioengineering 9 (4), 157, 2022	2022
16	Kinetics and morphology analysis of struvite precipitated from aqueous solution under the influence of heavy metals: Cu2+, Pb2+, Zn2+ Google Scholar 👨‍🔬 DS Perwitasari, S Muryanto, J Jamari, AP Bayuseno 📚 Journal of environmental chemical engineering 6 (1), 37-43, 2018	2018
17	Combined effect of texturing and boundary slippage in lubricated sliding contacts Google Scholar 👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper 📚 Tribology international 66, 274-281, 2013	2013
18	Effect of short-term deep-pressure portable seat on behavioral and biological stress in children with autism spectrum disorders: A pilot study Google Scholar 👨‍🔬 IY Afif, M Farkhan, O Kurdi, MI Maula, MI Ammarullah, B Setiyana, ... 📚 Bioengineering 9 (2), 48, 2022	2022
19	Advanced design and manufacturing of custom orthotics insoles based on hybrid Taguchi-response surface method Google Scholar 👨‍🔬 PW Anggoro, B Bawono, J Jamari, M Tauviqirrahman, AP Bayuseno 📚 Heliyon 7 (3), 2021	2021
20	Deformation due to contact between a rough surface and a smooth ball Google Scholar 👨‍🔬 J Jamari, DJ Schipper 📚 Wear 262 (1-2), 138-145, 2007	2007
21	Running-in of rolling contacts Google Scholar 👨‍🔬 J Jamari 📚 Enschede, The Netherlands: PhD Thesis, 2006	2006
22	Finite element analysis of artificial hip joint movement during human activities Google Scholar 👨‍🔬 E Saputra, IB Anwar, J Jamari, E Van Der Heide 📚 Procedia engineering 68, 102-108, 2013	2013
23	Plastic deterministic contact of rough surfaces Google Scholar 👨‍🔬 J Jamari, MB de Rooij, DJ Schipper	2007
24	Deterministic repeated contact of rough surfaces Google Scholar 👨‍🔬 J Jamari, DJ Schipper 📚 Wear 264 (3-4), 349-358, 2008	2008
25	Relationship between deformation and running-in wear on hard-on-hard bearings from metal, ceramic, and diamond materials for total hip prosthesis Google Scholar 👨‍🔬 MI Ammarullah, T Hidayat, MDP Lamura, J Jamari 📚 Jurnal Tribologi 38, 69-81, 2023	2023
26	Plastic deformation and contact area of an elastic–plastic contact of ellipsoid bodies after unloading Google Scholar 👨‍🔬 J Jamari, DJ Schipper 📚 Tribology International 40 (8), 1311-1318, 2007	2007
27	Tresca stress evaluation of Metal-on-UHMWPE total hip arthroplasty during peak loading from normal walking activity Google Scholar 👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, J Jamari 📚 Materials Today: Proceedings 63, S143-S146, 2022	2022
28	A 3-dimensional finite element analysis of the insole shoe orthotic for foot deformities Google Scholar 👨‍🔬 PW ANGGORO, E Saputra, M Tauviqirrahman, J Jamari, AP Bayusena 📚 International Journal of Applied Engineering Research 12 (15), 5254-5460, 2017	2017
29	An analytical approach on the tribological behaviour of pocketed slider bearings with boundary slip including cavitation Google Scholar 👨‍🔬 M Muchammad, M Tauviqirrahman, J Jamari, DJ Schipper 📚 Lubrication science 29 (3), 133-152, 2017	2017
30	Numerical study of the load-carrying capacity of lubricated parallel sliding textured surfaces including wall slip Google Scholar 👨‍🔬 DJ Tauviqirrahman, M., Muchammad, Jamari, J., Schipper 📚 Tribology Transactions 57 (1), 134-145, 2013	2013
31	The effect of repeated impingement on UHMWPE material in artificial hip joint during salat activities Google Scholar 👨‍🔬 J Jamari, R Ismail, E Saputra, S Sugiyanto, IB Anwar 📚 Advanced Materials Research 896, 272-275, 2014	2014
32	Study of contact mechanics between two brass solids in various diameter ratios and friction coefficient Google Scholar 👨‍🔬 MDP Lamura, T Hidayat, MI Ammarullah, AP Bayuseno, J Jamari 📚 Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2023	2023
33	Analysis of the effect of ventilation hole angle and material variation on thermal behavior for car disc brakes using the finite element method Google Scholar 👨‍🔬 M Tauviqirrahman, M Muchammad, T Setiazi, B Setiyana, J Jamari 📚 Results in Engineering 17, 100844, 2023	2023
34	Hydrothermally synthesized-nanoscale carbonated hydroxyapatite with calcium carbonates derived from green mussel shell wastes Google Scholar 👨‍🔬 MA Irfa'i, WW Schmahl, YM Pusparizkita, S Muryanto, A Prihanto, R Ismail, ... 📚 Journal of Molecular Structure 1306, 137837, 2024	2024
35	Kinetics and morphological characteristics of struvite (MgNH4PO4. 6H2O) under the influence of maleic acid Google Scholar 👨‍🔬 AP Bayuseno, DS Perwitasari, S Muryanto, M Tauviqirrahman, J Jamari 📚 Heliyon 6 (3), 2020	2020
36	Range of motion simulation of hip joint movement during salat activity Google Scholar 👨‍🔬 J Jamari, IB Anwar, E Saputra, E van der Heide 📚 The Journal of Arthroplasty 32 (9), 2898-2904, 2017	2017
37	Optimization of the complex slip surface and its effect on the hydrodynamic performance of two-dimensional lubricated contacts Google Scholar 👨‍🔬 DJ Tauviqirrahman, M., Ismail, R., Jamari, J., Schipper 📚 Computers and Fluids 79, 27-43, 2013	2013
38	Diameter ratio and friction coefficient effect on equivalent plastic strain (PEEQ) during contact between two brass solids Google Scholar 👨‍🔬 M Danny Pratama Lamura, M Imam Ammarullah, T Hidayat, ... 📚 Cogent Engineering 10 (1), 2218691, 2023	2023
39	Analysis of rake angle effect to stress distribution on excavator bucket teeth using finite element method Google Scholar 👨‍🔬 SH Suryo, AP Bayuseno, J Jamari, AI Wahyudi 📚 Civil Engineering Journal 3 (12), 1222-1234, 2017	2017
40	Thermal analysis of disc brakes using finite element method Google Scholar 👨‍🔬 Jaenudin, J Jamari, M Tauviqirrahman 📚 AIP Conference Proceedings 1788 (1), 030028, 2017	2017
41	CFD analysis of journal bearing with a heterogeneous rough/smooth surface Google Scholar 👨‍🔬 M Tauviqirrahman, J Jamari, AA Wicaksono, M Muchammad, S Susilowati, ... 📚 Lubricants 9 (9), 88, 2021	2021
42	Investigation of the tribological performance of heterogeneous slip/no-slip journal bearing considering thermo-hydrodynamic effects Google Scholar 👨‍🔬 M Tauviqirrahman, MF Afif, P Paryanto, J Jamari, W Caesarendra 📚 Fluids 6 (2), 48, 2021	2021
43	Simulation of excavator bucket pressuring through finite element method Google Scholar 👨‍🔬 SH Suryo, AP Bayuseno, J Jamari, G Ramadhan 📚 Civil Engineering Journal 4 (3), 2018	2018
44	Investigation of mesh model for a finite element simulation of the dual-mobility prosthetic hip joint Google Scholar 👨‍🔬 T Hidayat, R Ismail, M Tauviqirrahman, E Saputra, MI Ammarullah, ... 📚 Jurnal Tribologi 38, 118-140, 2023	2023
45	Batch hydrothermal synthesis of nanocrystalline, thermostable hydroxyapatite at various pH and temperature levels Google Scholar 👨‍🔬 A Prihanto, S Muryanto, R Ismail, J Jamari, AP Bayuseno 📚 Inorganic Chemistry Communications 157, 111301, 2023	2023
46	Elastohydrodynamic behavior analysis on water-lubricated journal bearing: a study of acoustic and tribological performance based on CFD-FSI approach Google Scholar 👨‍🔬 M Tauviqirrahman, J Jamari, M Bagir, W Caesarendra, P Paryanto 📚 Journal of the Brazilian Society of Mechanical Sciences and Engineering 44 …, 2022	2022
47	Interference screws 3D printed with polymer-based biocomposites (HA/PLA/PCL) Google Scholar 👨‍🔬 J Jamari, DF Fitriyana, PS Ramadhan, S Nugroho, R Ismail, AP Bayuseno 📚 Materials and Manufacturing Processes 38 (9), 1093-1103, 2023	2023
48	The subjective comfort test of autism hug machine portable seat Google Scholar 👨‍🔬 MI Maula, MB Aliyafi, J Jamari, IY Afif, MI Ammarullah, TI Winarni, AL Aji 📚 Journal of Intellectual Disability-Diagnosis and Treatment 9 (3), 182-188, 2021	2021
49	Permeability Study of Functionally Graded Scaffold Based on Morphology of Cancellous Bone. Google Scholar 👨‍🔬 I Akbar, AT Prakoso, Y Martino Astrada, MS Sinaga, MI Ammarullah, ... 📚 Malaysian Journal of Medicine & Health Sciences 17, 2021	2021
50	Mineralizing CO2 and producing polymorphic calcium carbonates from bitumen-rock asphalt manufacturing solid residues Google Scholar 👨‍🔬 YM Pusparizkita, WW Schmahl, M Ambarita, HN Kholid, AY Sadewa, ... 📚 Cleaner Engineering and Technology 12, 100602, 2023	2023
51	Analysis of AISI material power of AISI 4140 bucket teeth excavator using influence of abrasive wear Google Scholar 👨‍🔬 SH Suryo, AP Bayuseno, J Jamari, MAR Ramadhan 📚 AIP Conference Proceedings 1977 (1), 030022, 2018	2018
52	A study of slip position on improving the hydrodynamic lubrication performance of single-textured bearing using a mass conserving numerical approach Google Scholar 👨‍🔬 M Tauviqirrahman, WK Ajie, E Yohana, M Muchammad, J Jamari 📚 International Journal of Engineering and Technology 8 (2), 913-921, 2016	2016
53	Numerical simulation of artificical hip joint movement for western and japanse-style activities Google Scholar 👨‍🔬 E Saputra, I Budiwan, R Ismail, J Jamari, E van Der Heide 📚 Jurnal Teknologi 66 (3), 53-58, 2014	2014
54	Numerical study of salat movements for total hip replacement patient Google Scholar 👨‍🔬 R Ismail, E Saputra, M Tauviqirrahman, AB Legowo, IB Anwar, J Jamari 📚 Applied Mechanics and Materials 493, 426-431, 2014	2014
55	Influence of roughness on the behavior of three-dimensional journal bearing based on fluid-structure interaction approach Google Scholar 👨‍🔬 M Tauviqirrahman, M., Ichsan, B.C., Jamari 📚 Journal of Mechanical Science and Technology 33 (10), 4783-4790, 2019	2019
56	Stick-slip behaviour of a viscoelastic flat sliding along a rigid indenter Google Scholar 👨‍🔬 B Setiyana, R Ismail, J Jamari, DJ Schipper 📚 Tribology Online 11 (4), 512-518, 2016	2016
57	The effect of load, diameter ratio, and friction coefficient on residual stress in a hemispherical contact for application in biomedical industry Google Scholar 👨‍🔬 MDP Lamura, MI Ammarullah, MI Maula, T Hidayat, AP Bayuseno, ... 📚 Journal of Materials Engineering and Performance 33 (15), 7528-7536, 2024	2024
58	Investigation on acoustic, thermal, and tribological properties of hydrodynamic journal bearing with heterogeneous rough/smooth surface Google Scholar 👨‍🔬 M Tauviqirrahman, E Yohana, Paryanto, Jamari, FS Muslim, PW Anggoro 📚 Results in Engineering 18, 101112, 2023	2023
59	Performance of textured dual mobility total hip prosthesis with a concave dimple during Muslim prayer movements Google Scholar 👨‍🔬 M Muchammad, M Tauviqirrahman, MI Ammarullah, M Iqbal, B Setiyana, ... 📚 Scientific reports 14 (1), 916, 2024	2024
60	Reuse of waste crab shells for synthesis of calcium carbonate as a candidate biomaterial Google Scholar 👨‍🔬 AP Bayuseno, AI Prasetya, R Ismail, B Setiyana, J Jamari 📚 medicine 10 (14), 10.31788, 2022	2022
61	Aqueous crystallization of monocalcium phosphate monohydrate with green mussel shells (Verna piridis) for calcium sources Google Scholar 👨‍🔬 A Prihanto, DF Fitriyana, S Muryanto, I Masykur, R Ismail, J Jamari, ... 📚 Journal of Environmental Chemical Engineering 9 (6), 106913, 2021	2021
62	Study of an additional layer of cement mantle hip joints for reducing cracks Google Scholar 👨‍🔬 J Jamari, E Saputra, IB Anwar, E Van Der Heide 📚 Journal of Functional Biomaterials 10 (3), 40, 2019	2019
63	A method for estimating the contact area of a dual-mobility total hip prosthesis Google Scholar 👨‍🔬 T Hidayat, MI Ammarullah, E Saputra, M Lamura, C KN, R Ismail, ... 📚 AIP Advances 14 (1), 2024	2024
64	A kinetic and structural analysis of the effects of Ca-and Fe ions on struvite crystal growth Google Scholar 👨‍🔬 DS Perwitasari, S Muryanto, WW Schmahl, J Jamari, AP Bayuseno 📚 Solid State Sciences 134, 107062, 2022	2022
65	Effect of inertia on the cavitation phenomena of hydrodynamic textured bearings considering slip Google Scholar 👨‍🔬 J Jamari, M Muchammad, F Hilmy, M Tauviqirrahman 📚 Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 …, 2019	2019
66	Parameter Optimization of Strategies at CNC end Milling Machine Roland Modela MDX-40R Cam Against Surface Roughness Made Insoles Shoe Orthotic EVA Rubber Foam Google Scholar 👨‍🔬 PW ANGGORO, B Bawono, J Jamari, AP Bayusena 📚 International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS …, 2016	2016
67	Numerical investigation of the combined effects of slip and texture on tribological performance of bearing Google Scholar 👨‍🔬 S Susilowati, M Tauviqirrahman, J Jamari, AP Bayuseno 📚 Tribology-Materials, Surfaces & Interfaces 10 (2), 86-89, 2016	2016
68	Hydrodynamic Lubrication of Textured Journal Bearing Considering Slippage: Two-dimensional CFD Analysis Using Multiphase Cavitation Model Google Scholar 👨‍🔬 M M. Tauviqirrahman, A. Pratama, Jamari 📚 Tribology in Industry 41 (3), 401-415, 2019	2019
69	Multiphase computational fluid dynamics analysis of hydrodynamic journal bearing under the combined influence of texture and slip Google Scholar 👨‍🔬 M Tauviqirrahman, J Jamari, BS Wibowo, HM Fauzan, M Muchammad 📚 Lubricants 7 (11), 97, 2019	2019
70	A comparison between mechanical properties of UHMWPE from ram extrusion process and UHMWPE from compression molding process for a hip joint liner Google Scholar 👨‍🔬 M Wahyudi, YE Putra, S Arrohman, J Jamari, R Ismail 📚 IOP Conference Series: Materials Science and Engineering 432 (1), 012007, 2018	2018
71	Running-in behavior of dual-mobility cup during the gait cycle: A finite element analysis Google Scholar 👨‍🔬 T Hidayat, R Ismail, M Tauviqirrahman, E Saputra, MI Ammarullah, ... 📚 Proceedings of the Institution of Mechanical Engineers, Part H: Journal of …, 2024	2024
72	TRIZ-based method for developing a conceptual laparoscopic surgeon’s chair Google Scholar 👨‍🔬 G Santoso, MI Ammarullah, S Sugiharto, T Hidayat, S Khoeron, ... 📚 Cogent Engineering 11 (1), 2298786, 2024	2024
73	System dynamics modelling for calculation of carbon footprint on a non-homogeneous production system: A case in a ceramic studio Google Scholar 👨‍🔬 PW Anggoro, T Yuniarto, B Bawono, DB Setyohadi, PS Murdapa, J Jamari 📚 Results in Engineering 17, 100812, 2023	2023
74	A comparative study of finite journal bearing in laminar and turbulent regimes using CFD (computational fluid dynamic) Google Scholar 👨‍🔬 TM Susilowati, J Jamari, AP Bayuseno, Muchammad 📚 MATEC Web Conf. 58 (1), 10-13, 2016	2016
75	Practical insights into the recycling of green mussel shells (Perna Viridis) for the production of precipitated calcium carbonate Google Scholar 👨‍🔬 A Prihanto, S Muryanto, R Ismail, J Jamari, AP Bayuseno 📚 Environmental Technology 45 (2), 235-245, 2024	2024
76	Investigation of contact behavior on a model of the dual-mobility artificial hip joint for Asians in different inner liner thicknesses Google Scholar 👨‍🔬 T Hidayat, MI Ammarullah, R Ismail, E Saputra, MDP Lamura, C KN, ... 📚 World Journal of Orthopedics 15 (4), 321, 2024	2024
77	Crystallization of struvite in the presence of calcium ions: Change in reaction rate, morphology and chemical composition Google Scholar 👨‍🔬 DS Perwitasari, S Muryanto, J Jamari, AP Bayuseno 📚 Cogent Engineering 9 (1), 2049962, 2022	2022
78	Running-in Analysis of Transmission Gear Google Scholar 👨‍🔬 APB J. Jamari, M.I. Ammarullah, I.Y. Afif, R. Ismail, M. Tauviqirrahman 📚 Tribology in Industry 43 (3), 434-441, 2021	2021
79	Understanding of low-carbon steel marine corrosion through simulation in artificial seawater. Google Scholar 👨‍🔬 YM Pusparizkita, VA Fardilah, C Aslan, J Jamari, AP Bayuseno 📚 AIMS Materials Science 10 (3), 2023	2023
80	Effect of surface texturing on the performance of artificial hip joint for Muslim prayer (Salat) activity Google Scholar 👨‍🔬 M Jamari, J., Tauviqirrahman, M., Husein, H.R., Muchammad 📚 Biotribology 26, 100177, 2021	2021
81	Milling strategy optimized for orthotics insole to enhance surface roughness and machining time by Taguchi and response surface methodology Google Scholar 👨‍🔬 B Bawono, PW Anggoro, AP Bayuseno, J Jamari, M Tauviqirrahman 📚 Journal of Industrial and Production Engineering 36 (4), 237-247, 2019	2019
82	Synthesis and characterisation of struvite family crystals by an aqueous precipitation method Google Scholar 👨‍🔬 S Sutiyono, L Edahwati, DS Perwitasari, S Muryanto, J Jamari, ... 📚 MATEC Web of Conferences 58, 01006, 2016	2016
83	A bipolar artificial hip joint design for contact impingement reduction Google Scholar 👨‍🔬 E Saputra, IB Anwar, J Jamari, E van der Heide 📚 Advanced materials research 1123, 164-168, 2015	2015
84	A review of enhanced total hip prosthesis design and material bearing combination to accommodate Muslim prayer (Salat) movements: Biomechanical, biotribological, and biological … Google Scholar 👨‍🔬 MI Ammarullah, M Kozin, MI Maula, MDP Lamura, HA Wicaksono, ... 📚 Tribology International 205, 110518, 2025	2025
85	Finite element analysis of artificial hip joint implant made from stainless steel 316L Google Scholar 👨‍🔬 APB Rilo Berdin Taqriban, Rifky Ismail , J Jamari 📚 Bali Medical Journal 10 (1), 448-452, 2021	2021
86	2D computational tresca stress prediction of CoCrMo-on-UHMWPE bearing of total hip prosthesis based on body mass index Google Scholar 👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, ... 📚 Malays. J. Med. Health Sci 17, 18-21, 2021	2021
87	Puzzle Islamic floral patterns product tiles for wall and ceiling to decorate of Al Huda Mosque Indonesia—design, manufacturing, and fabrication Google Scholar 👨‍🔬 PW Anggoro, AT Yuniarto, M Tauviqirrahman, J Jamari, AP Bayuseno, ... 📚 Proceedings of the 6th International Conference and Exhibition on …, 2020	2020
88	Bibliometric Analysis of Publications in the Scopus Database: A Study at Diponegoro University during 2014-2018 Google Scholar 👨‍🔬 MTHS Yos Johan Utama, Budi Setiyono, Jamari 📚 E3S Web of Conferences 125, 23001, 2019	2019
89	Understanding the occurrence of a wavy wear track on elastomeric materials Google Scholar 👨‍🔬 M Khafidh, B Setiyana, J Jamari, MA Masen, DJ Schipper 📚 Wear 412, 23-29, 2018	2018
90	Modeling of repeated rolling contact of rigid ball on rough surface: residual stress and plastic strain analysis Google Scholar 👨‍🔬 R Ismail, M Tauviqirrahman, E Saputra, J Jamari, DJ Schipper 📚 Procedia Engineering 68, 593-599, 2013	2013
91	Von Mises stress analysis of surgery chair designed for laparoscopic surgeon with lifting mechanism Google Scholar 👨‍🔬 G Santoso, MI Ammarullah, S Sugiharto, A Mughni, AP Bayuseno, ... 📚 AIP Advances 14 (4), 2024	2024
92	OPTIMIZATION OF CNC MILLING PARAMETERS THROUGH THE TAGUCHI AND RSM METHODS FOR SURFACE ROUGHNESS OF UHMWPE ACETABULAR CUP Google Scholar 👨‍🔬 APB W.D. LESTARI, P.W. ANGGORO, R. ISMAIL, J. JAMARI 📚 International Journal of Mechanical Engineering and Technology 10 (2), 1762-1775, 2019	2019
93	Graphite as dry lubricant to reduce rail wheels wear level Google Scholar 👨‍🔬 J Suparno, DA Halim, J Junaidi, A Setiawan, M Effendy, J Jamari 📚 Materials Science Forum 961, 126-133, 2019	2019
94	Electrodeposited Zn and Zn–CaCO3 composite on mild steel for biodiesel storage tanks: Corrosion resistance evaluation Google Scholar 👨‍🔬 VA Fardilah, WW Schmahl, YM Pusparizkita, C Aslan, M Tauviqirrahman, ... 📚 Results in Surfaces and Interfaces 18, 100426, 2025	2025
95	Investigating the Effect of Deacetylation Temperature on the Characterization of Chitosan from Crab Shells as a Candidate for Organic Nanofluids Google Scholar 👨‍🔬 R Ismail, DF Fitriyana, AP Bayuseno, Jamari 📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 103 (2 …, 2023	2023
96	Design of eco-friendly pen made of coconut shell waste Google Scholar 👨‍🔬 B Yulianto, G Kurnia, J Jamari, AP Bayuseno 📚 E3S Web of Conferences 125, 03002, 2019	2019
97	Human bone marrow-derived mesenchymal cell reactions to 316L stainless steel: an in vitro study on cell viability and interleukin-6 expression Google Scholar 👨‍🔬 IB Anwar, A Santoso, E Saputra, R Ismail, J Jamari, E Van der Heide 📚 Advanced pharmaceutical bulletin 7 (2), 335, 2017	2017
98	Chemical precipitation of nanocrystalline hydroxyapatite with calcium carbonate derived from green mussel shell wastes and several phosphorus sources Google Scholar 👨‍🔬 V Naubnome, A Prihanto, WW Schmahl, YM Pusparizkita, R Ismail, ... 📚 Case Studies in Chemical and Environmental Engineering 11, 101154, 2025	2025
99	Indirect mineral carbonation of natural asphalt extraction solid waste residue via pH and temperature control Google Scholar 👨‍🔬 M Ambarita, D Ardiansyah, WW Schmahl, YM Pusparizkita, R Ismail, ... 📚 Case Studies in Chemical and Environmental Engineering 9, 100715, 2024	2024
100	Comfort evaluation and physiological effects/autonomic nervous system response of inflatable deep pressure vest in reducing anxiety Google Scholar 👨‍🔬 MI Maula, MI Ammarullah, HN Fadhila, IY Afif, H Hardian, J Jamari, ... 📚 Heliyon 10 (16), 2024	2024
101	A comparative study on turbulent models for three-dimensional thermo-hydrodynamic analysis of textured thrust bearing Google Scholar 👨‍🔬 M Tauviqirrahman, Y Lim, J Jamari, M Muchammad, BO Pugastri, ... 📚 Cogent Engineering 11 (1), 2402048, 2024	2024
102	Numerical investigation of the mechanical properties of 3D printed PLA scaffold Google Scholar 👨‍🔬 Z Abidin, IG Fadhlurrahman, I Akbar, RU Putra, AT Prakoso, MZ Kadir, ... 📚 5th FIRST T1 T2 2021 International Conference (FIRST-T1-T2 2021), 83-89, 2022	2022
103	Design of hug machine portable seat for autistic children in public transport application Google Scholar 👨‍🔬 IY Afif, MI Maula, MB Aliyafi, AL Aji, TI Winarni, J Jamari 📚 IOP Conference Series: Materials Science and Engineering 1096 (1), 012034, 2021	2021
104	Optimization of struvite crystallization and heavy metal recovery in wastewater using response surface methodology Google Scholar 👨‍🔬 AP Perwitasari, D.S., Muryanto, S., Jamari, J., Bayuseno 📚 Oriental Journal of Chemistry 34 (1), 336-245, 2018	2018
105	An analytical study of the wear pattern of an abraded rubber surface: the interaction model Google Scholar 👨‍🔬 B Setiyana, R Ismail, J Jamari, DJ Schipper 📚 Tribology-Materials, Surfaces & Interfaces 12 (4), 186-192, 2018	2018
106	Analysis of the contact area of smooth and rough surfaces in contact with sphere indenter using finite element method Google Scholar 👨‍🔬 Kartini, E Saputra, R Ismail, J Jamari, AP Bayuseno 📚 MATEC Web of Conferences 58, 04007, 2016	2016
107	Finite element study of contact pressure distribution on inner and outer liner in the bipolar hip prosthesis Google Scholar 👨‍🔬 E Saputra, IB Anwar, R Ismail, J Jamari, E Van Der Heide 📚 AIP Conference Proceedings 1725 (1), 020075, 2016	2016
108	Reconstruction of the artificial knee joint using a reverse engineering approach based on computer-aided design Google Scholar 👨‍🔬 D Darmanto, R Novriansyah, R Ismail, J Jamari, PW Anggoro, ... 📚 Journal of Medical Engineering & Technology 46 (2), 136-147, 2022	2022
109	Reverse engineering from 3D mesh to ceramic product in the form of miranda kerr tea for one teapot in PT doulton Indonesia Google Scholar 👨‍🔬 PW Anggoro, AR Tan Wijaya, T Yuniarto, AP Bayuseno, J Jamari, ... 📚 Cogent Engineering 8 (1), 1981522, 2021	2021
110	Friction and wear analysis of UHMWPE material using pin-on-disc tester with lubricant and non-lubricant Google Scholar 👨‍🔬 M Wahyudi, R Ismail, J Jamari 📚 Journal of Physics: Conference Series 1569 (3), 032057, 2020	2020
111	MITIGATION OF CaCO3 SCALE FORMATION IN PIPES UNDER INFLUENCE OF VIBRATION AND ADDITIVES Google Scholar 👨‍🔬 JJAPB W. Mangestiyono, S. Muryanto 📚 Rasayan Journal of Chemistry 12 (1), 192 - 204, 2019	2019
112	Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion Google Scholar 👨‍🔬 J Jamari, R Ismail, IB Anwar, E Saputra, M Tauviqirrahman, EVD Heide 📚 AIP Conference Proceedings 1725 (1), 020030, 2016	2016
113	Friction reduction in lubricated-MEMS with complex slip surface pattern Google Scholar 👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper 📚 Procedia engineering 68, 331-337, 2013	2013
114	Study of application of coconut coir fiber-based wood-based panels: A literature review Google Scholar 👨‍🔬 NMH Bawono, B Bawono, PW Anggoro, J Jamari 📚 Composites Part C: Open Access 17, 100588, 2025	2025
115	Rapid synthesis of monocalcium phosphate using calcium carbonate extracted from green mussel shells and phosphoric acid solution Google Scholar 👨‍🔬 A Prihanto, S Muryanto, YM Pusparizkita, R Ismail, J Jamari, ... 📚 International Journal of Hydrogen Energy 49, 1200-1209, 2024	2024
116	In-depth knowledge of the low-temperature hydrothermal synthesis of nanocrystalline hydroxyapatite from waste green mussel shell (Perna Viridis) Google Scholar 👨‍🔬 A Prihanto, S Muryanto, A Sancho Vaquer, WW Schmahl, R Ismail, ... 📚 Environmental Technology 45 (12), 2375-2387, 2024	2024
117	Weighted vest combined with vibrotactile stimulations decrease the sympathetic activity: a repeated measures study Google Scholar 👨‍🔬 MI Maula, MI Ammarullah, CM Nugwita, MS Faisal, IY Afif, FA Husaini, ... 📚 Health Science Reports 7 (11), e70194, 2024	2024
118	Assessing the calming effects of a self-regulated inflatable vest: an evaluation based on Visual Analogue Scale and Electroencephalogram Google Scholar 👨‍🔬 MI Maula, IY Afif, MI Ammarullah, MDP Lamura, J Jamari, TI Winarni 📚 Cogent Engineering 11 (1), 2313891, 2024	2024
119	Power Optimization of The Horizontal Axis Wind Turbine Capacity of 1 MW on Various Parameters of The Airfoil, an Angle of Attack, and a Pitch Angle Google Scholar 👨‍🔬 Kriswanto, MAB Setiawan, DH Al-Janan, Jamari 📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 103 (2 …, 2023	2023
120	Chairless Chairs for Orthopedic Surgery Purpose - A Literature Review Google Scholar 👨‍🔬 G Santoso, S Sugiharto, A Mughni, MI Ammarullah, AP Bayuseno, ... 📚 Open Access Macedonian Journal of Medical Sciences 10 (F), 146-152, 2022	2022
121	Running-in behavior on single-mobility total hip arthroplasty Google Scholar 👨‍🔬 T Hidayat, J Jamari, AP Bayuseno, R Ismail, M Tauviqirrahman, E Saputra 📚 Medical Engineering & Physics 104 (1), 103806, 2022	2022
122	Mechanical properties of Carbon-matrix composites for a blade runner’s artificial leg Google Scholar 👨‍🔬 R Ismail, D Paras Utami, M Arid Irfai, J Jamari, AP Bayuseno 📚 Cogent Engineering 8 (1), 1923382, 2021	2021
123	Optimasi Numerik Permukaan Bertekstur pada Total Hip Arthroplasty untuk Mengurangi Tekanan Kontak dengan Variabel Profil dan Kedalaman Google Scholar 👨‍🔬 JJ M. I. Ammarullah, H. Basri, I. Haryanto 📚 ROTASI 23 (1), 50-54, 2021	2021
124	Designing and wear testing of Excavator bucket teeth for the need of Indonesian mining Google Scholar 👨‍🔬 JJAPB R. Ismail, Z. Muhammad 📚 ARPN Journal of Engineering and Applied Sciences 15 (1), 21-26, 2020	2020
125	Reverse Innovative Design of Insole Shoe Orthotic for Diabetic Patient Google Scholar 👨‍🔬 APBAW P.W. Anggoro , B. Bawono , M. Tauviqirrahman , J. Jamari 📚 Journal of Engineering and Applied Sciences 14 (1), 106-113, 2019	2019
126	Controlling of calcium carbonate scale deposition on the piping system with laminar flow and in the presence of citric acids Google Scholar 👨‍🔬 S Raharjo, S Muryanto, J Jamari, AP Bayuseno 📚 Journal of Physics: Conference Series 1150 (1), 012058, 2019	2019
127	Design and manufacturing orthotics shoe insole with optimum surface roughness using the CNC milling Google Scholar 👨‍🔬 PW ANGGORO, B BAWONO, M Tauviqirrahman, AP Bayusena, J Jamari 📚 Journal of Engineering Science and Technology 14 (4), 1799-1819, 2019	2019
128	Effects of the optimised pH and molar ratio on struvite precipitation in aqueous system Google Scholar 👨‍🔬 L Edahwati, S Sutiyono, DS Perwitasari, S Muryanto, J Jamari, ... 📚 MATEC Web of Conferences 58, 01018, 2016	2016
129	Optimization of calcium sulfate precipitated in the laminar flow pipe through response surface modeling of temperature, Ca2+ concentration and citric acid additives Google Scholar 👨‍🔬 S Raharjo, S Muryanto, J Jamari, AP Bayuseno 📚 Oriental Journal of Chemistry 32 (6), 3145-3154, 2016	2016
130	Analisa Gait Cycledan Beban Statis Produk Kaki Tiruanatas Lutut (Above Knee Prosthesis) Menggunakan Metode Elemen Hingga Google Scholar 👨‍🔬 M Dzulfikar, J Jamari, R Ismail, S Sugiyanto, D Setyawan 📚 Majalah Ilmiah Momentum 11 (2), 2015	2015
131	Two‐Dimensional Finite Element Analysis on Running‐in of Elastic‐Plastic Rolling Contact Google Scholar 👨‍🔬 R Ismail, M Tauviqirrahman, Jamari, DJ Schipper 📚 AIP Conference Proceedings 1325 (1), 190-193, 2010	2010
132	Narrative Review of Subchondral Bone Morphology on Cartilage Damage (Osteoarthritis) Google Scholar 👨‍🔬 NY Mahendra, DP Putra, I Akbar, RU Putra, AT Prakoso, M Yanis, ... 📚 5th FIRST T1 T2 2021 International Conference (FIRST-T1-T2 2021), 77-82, 2022	2022
133	Mechanical and thermal deformations effects on plain journal bearing with isoviscous boundary condition based on CFD and FSI methods Google Scholar 👨‍🔬 J Muchammad, Tauviqirrahman, M, Soetopo, H.S.S. 📚 Jurnal Tribologi 28, 63-81, 2021	2021
134	Reducing contact stress of the surface by modifying different hardness of femoral head and cup in hip prosthesis Google Scholar 👨‍🔬 E Saputra, I Budiwan Anwar, J Jamari, E Heide 📚 Frontiers in Mechanical Engineering 7, 631940, 2021	2021
135	Numerical investigation of the hardness of tire rubber material by indentation method Google Scholar 👨‍🔬 B Setiyana, C Prabowo, J Jamari, R Ismail, S Sugiyanto, E Saputra 📚 Journal of Physics: Conference Series 1517 (1), 012020, 2020	2020
136	Analysis of the effect of the slip-pocket in single and double parallel bearing considering cavitation: A theoretical approach Google Scholar 👨‍🔬 M Muchammad, M Tauviqirrahman, J Jamari, DJ Schipper 📚 Lubricants 9 (1), 3, 2020	2020
137	Optimization of mechanical parameters on outsole shoes orthotic comfort using finite element analysis Google Scholar 👨‍🔬 YEA Putra, PW Anggoro, T Yuniarto, AP Bayuseno, J Jamari, B Bawono 📚 2019 International Biomedical Instrumentation and Technology Conference …, 2019	2019
138	Effect of short-term deep-pressure portable seat on behavioral and biological stress in children with autism spectrum disorders: A pilot study. Bioengineering. 2022; 9 (2): 48 Google Scholar 👨‍🔬 IY Afif, M Farkhan, O Kurdi, MI Maula, MI Ammarullah, B Setiyana, ... 📚 s Note: MDPI stays neutral with regard to jurisdictional claims in published …, 2022	2022
139	Wear analysis of acetabular cup on metal-on-metal total hip arthroplasty with dimple addition using finite element method Google Scholar 👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, ... 📚 AIP Conference Proceedings 2391 (1), 020017, 2022	2022
140	Hydrodynamic lubrication analysis of hydrophobic textured journal bearing considering cavitation Google Scholar 👨‍🔬 M Tauviqirrahman, J Jamari, M Muchammad, A Ardiansyah, B Setiyana, ... 📚 Cogent Engineering 9 (1), 2069997, 2022	2022
141	Study of lubrication fluid pressure in artificial hip joint during bowing (Ruku’) Google Scholar 👨‍🔬 T Hidayat, J Jamari, AP Bayuseno, R Ismail, M Tauviqirrahman, ... 📚 International Conference and Exhibition on Sustainable Energy and Advanced …, 2021	2021
142	Machining Parameter Optimization of EVA Foam Orthotic Shoe Insoles Google Scholar 👨‍🔬 AH Paulus Wisnu Anggoro, Abet Adhy Anthony, Mohammad Tauviqirrahman, Jamari ... 📚 International Journal of Engineering and Technology Innovation 10 (3), 179-190, 2020	2020
143	Optimization parameters tooling design to increase the surface quality of orthotic insole shoes using the Taguchi approach and surface response methods Google Scholar 👨‍🔬 B Bawono, PW Anggoro, M Tauviqirrahman, J Jamari, AP Bayuseno, ... 📚 Materials Today: Proceedings 13, 47-52, 2019	2019
144	The effect of additional layer between liner and PMMA on reducing cracks of cement mantle hip joints Google Scholar 👨‍🔬 J Jamari, AL Han, E Saputra, IB Anwar, E van der Heide 📚 International Journal of Engineering and Technology Innovation 8 (2), 99-106, 2018	2018
145	Numerical analysis of stress distribution on artificial hip joint due to jump activity Google Scholar 👨‍🔬 GP Annanto, E Saputra, J Jamari, AP Bayuseno, R Ismail, ... 📚 E3S Web of Conferences 73, 12005, 2018	2018
146	Wear Analysis of Spherical Graphite Cast Iron Using Pin-on Disc Tribotester Google Scholar 👨‍🔬 J Mohammad Tauviqirrahman, Bayu Kurniawan 📚 Journal of Physical Science 29 (2), 15-26, 2018	2018
147	Finite element study of the effect of UHMWPE liner thickness on the contact area and stress distribution in a bipolar hip joint Google Scholar 👨‍🔬 J Jamari, E Saputra, IB Anwar, R Ismail, EVD Heide 📚 IOP Conference Series: Materials Science and Engineering 202 (1), 012095, 2017	2017
148	Strength analysis of monocoque frame construction in an electric city car using finite element method Google Scholar 👨‍🔬 A Makhrojan, SS Budi, J Jamari, A Suprihadi, R Ismail 📚 Proceedings of the Joint International Conference on Electric Vehicular …, 2015	2015
149	Microwave-assisted synthesis of nanocrystalline hydroxyapatite using calcium supplies from green mussel shells with synthesis time optimization Google Scholar 👨‍🔬 DF Fitriyana, RC Muhammadin, YM Pusparizkita, R Ismail, J Jamari, ... 📚 Nano-Structures & Nano-Objects 42, 101484, 2025	2025
150	Microwave-assisted hydrothermal synthesis of carbonated apatite with calcium and phosphate resources derived from green mussel shell and bovine bone wastes Google Scholar 👨‍🔬 MA Irfa'i, S Muryanto, A Prihanto, YM Pusparizkita, R Ismail, J Jamari, ... 📚 Environmental Advances 17, 100582, 2024	2024
151	Calcination-based direct extraction of hydroxyapatite from bovine bone waste Google Scholar 👨‍🔬 MA Irfa’i, S Muryanto, YM Pusparizkita, A Prihanto, A Sancho Vaquer, ... 📚 Environmental technology 45 (28), 6249-6261, 2024	2024
152	Reverse Engineering Artificial Knee Joint using 3D Scanning Google Scholar 👨‍🔬 Y Setyoadi, R Ismail, J Jamari, AP Bayuseno, R Novriansyah, ... 📚 2023 IEEE International Biomedical Instrumentation and Technology Conference …, 2023	2023
153	Advanced design and fabrication of islamic tile ceramic wall tiles with Indonesian batik patterns using artistic CAD/CAM and 3D printing technology Google Scholar 👨‍🔬 PW Anggoro, T Yuniarto, B Bawono, DB Setyohadi, S Felasari, ... 📚 Frontiers in Mechanical Engineering 7, 799086, 2022	2022
154	Optimization of milling parameters to increase surface quality and machining time of the bohler m303 extra Google Scholar 👨‍🔬 Kriswanto, W Sumbodo, W Aryadi, J Jamari 📚 IOP Conference Series: Earth and Environmental Science 700 (1), 012009, 2021	2021
155	Friction and Wear Pattern of Silica-Reinforced Styrene-Butadiene Rubber (SBR) in Sliding Contact with a Blade Indenter Google Scholar 👨‍🔬 B Setiyana, Jamari, M Khafidh, M Tauviqirrahman, R Ismail, DJ Schipper 📚 Lubricants 9 (11), 110, 2021	2021
156	Mechanical properties of Aisi 316L for artificial hip joint materials made by investment casting Google Scholar 👨‍🔬 RAN Al Hakim, O Kurdi, R Ismail, S Nugroho, J Jamari, DF Fitriyana, ... 📚 International Journal of Advanced Research in Engineering and Technology 11 (6), 2020	2020
157	Computational Analysis of Different Designed Hip Joint Prostheses Using Finite Element Method Google Scholar 👨‍🔬 RB Taqriban, R Ismail, J Jamari, AP Bayuseno 📚 2020 7th International Conference on Information Technology, Computer, and …, 2020	2020
158	A 3-dimensional computational fluid-structure interaction analysis in the hip-joint prosthesis during solat (prayer) activity Google Scholar 👨‍🔬 M Bayu Siswo Wibowo, Prayudha Naufal Wijaya, Mohammad Tauviqirrahman, Rifky ... 📚 Jurnal Tribologi 20, 125-141, 2019	2019
159	A Wear Formulation of Total Hip Prosthesis for Salat Activity Google Scholar 👨‍🔬 EH Eko Saputra, Iwan Budiwan Anwar, Jamari, J. 📚 International Review of Mechanical Engineering 13 (1), 29-37, 2019	2019
160	CNC milling of EVA foam with varying hardness for custom orthotic shoe insoles and process parameter optimization Google Scholar 👨‍🔬 PW ANGGORO, AA ANTHONY, B BAWONO, J Jamari, AP Bayusena, ... 📚 Journal of Mechanical Engineering and Sciences 13 (3), 5347-5370, 2019	2019
161	Evaluation in conceptual design of human powered sand sieving machine Google Scholar 👨‍🔬 G Kurnia, B Yulianto, J Jamari, AP Bayuseno 📚 E3S Web of Conferences 125, 03001, 2019	2019
162	Analysis of non-Newtonian lubricated textured contact for mixed slip/no-slip configuration considering cavitation Google Scholar 👨‍🔬 AW Pratomo, Muhammad, M Tauviqirrahman, J Jamari, AP Bayuseno 📚 Journal of physics: Conference series 1217 (1), 012014, 2019	2019
163	Kinetics analysis of synthesis reaction of struvite with air-flow continous vertical reactors Google Scholar 👨‍🔬 L Edahwati, S Sutiyono, S Muryanto, J Jamari, DAP Bayuseno 📚 Journal of Physics: Conference Series 953 (1), 012245, 2018	2018
164	Dimensional accuracy and surface roughness of acetabular liner with UHMWPE: Assessment results between compression molding and CNC milling Google Scholar 👨‍🔬 AP Lestari, W.D., Nababan, D.K., Ismail, R., Jamari, J., Bayuseno 📚 International Review of Mechanical Engineering 12 (6), 516-521, 2018	2018
165	Scale Formation Of Barium Sulfate In The Piping Flow System: Mineralogy And Morphology Evalution Google Scholar 👨‍🔬 N Karaman, J Jamari, AP Bayuseno, S Muryanto 📚 J. Teknik Kimia Universitas pembangunan nasioonal “Veteran” Jawa Timur 23, 2017	2017
166	Study of unipolar and bipolar hip prostheses using finite element simulation: contact stress analysis Google Scholar 👨‍🔬 E Saputra, IB Anwar, R Ismail, J Jamari, E Van Der Heide 📚 Key Engineering Materials 739, 96-102, 2017	2017
167	The influence of vibration on CaCO3 scale formation in piping system Google Scholar 👨‍🔬 W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno 📚 MATEC Web of Conferences 58, 01027, 2016	2016
168	Preliminary study on the biocompatibility of stainless steel 316L and UHMWPE material Google Scholar 👨‍🔬 IB Anwar, E Saputra, J Jamari, E van der Heide 📚 Advanced Materials Research 1123, 160-163, 2015	2015
169	Perancangan Biomekanisme Sendi Protesa Untuk Pasien Amputasi Tungkai Di Atas Lutut Dengan Desain Ergonomi Dan Fleksibel Google Scholar 👨‍🔬 D Bactiar, A Audy, J Jamari, I Budiwan 📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2014	2014
170	A microwave-assisted hydrothermal method for rapidly synthesizing nanocrystalline carbonated hydroxyapatite from calcium resources in crab shell waste Google Scholar 👨‍🔬 YM Pusparizkita, RA Faizal, SAP Negara, R Ismail, J Jamari, ... 📚 Next Materials 9, 100946, 2025	2025
171	Using selective HCl and H2SO4 acids to extract calcium from extracted asphalt waste residues in preparation for subsequent indirect mineral carbonation Google Scholar 👨‍🔬 M Ambarita, YM Pusparizkita, WW Schmahl, G Reswara, MM Putra, ... 📚 Case Studies in Chemical and Environmental Engineering 10, 100998, 2024	2024
172	Optimisation of the machining time required by insole orthotic shoes for patients with clubfoot using the Taguchi and response surface methodology approach Google Scholar 👨‍🔬 PW Anggoro, B Bawono, DB Setyohadi, L Ratnasari, PK Fergiawan, ... 📚 Heliyon 9 (6), 2023	2023
173	Sustainable additive manufacturing of interference screws made from eco-friendly filament for anterior cruciate ligament reconstruction Google Scholar 👨‍🔬 LPS Hartanti, Haniel, FW Nugraha, PW Anggoro, R Ismail, J Jamari, ... 📚 IOP Conference Series: Earth and Environmental Science 1268 (1), 012065, 2023	2023
174	A review on flexion angle in high-flexion total knee arthroplasty for indonesian’s need Google Scholar 👨‍🔬 D Darmanto, R Novriansyah, PW Anggoro, R Ismail, J Jamari, ... 📚 Frontiers in Mechanical Engineering 8, 1049796, 2022	2022
175	Optimization of the toolpath strategy for the master ceramic jewelry mold pattern using the rhinoceros software and router cnc machine Google Scholar 👨‍🔬 SW Ratnanta, PW Anggoro, PK Fergiawan, J Jamari, AP Bayuseno 📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021	2021
176	Reverse innovative design and manufacturing strategy for optimizing production time of customized orthotic insoles with CNC milling Google Scholar 👨‍🔬 PW Anggoro, AA Anhony, M Tauviqirrahman, J Jamari, AP Bayuseno 📚 Journal of Physics: Conference Series 1517 (1), 012045, 2020	2020
177	Auto-Stirring Grains Bed Dryer as an Innovative Efficiency Solution Google Scholar 👨‍🔬 DZ Sjechlad, J Jamari, SA Widyanto 📚 E3S Web of Conferences 125, 13001, 2019	2019
178	Effects of five green inhibitors of controlling barite crystal growth in flow-induced vibration in pipe Google Scholar 👨‍🔬 N Karaman, W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno 📚 Rasayan Journal of Chemistry 12 (4), 1734-1743, 2019	2019
179	A study of the compression molding method for manufacturing a UHMWPE liner Google Scholar 👨‍🔬 FS Wicaksono, R Ismail, J Jamari 📚 IOP Conference Series: Materials Science and Engineering 432 (1), 012006, 2018	2018
180	Design of a hip prosthetic tribometer based on salat gait cycle Google Scholar 👨‍🔬 T Towijaya, R Ismail, J Jamari 📚 AIP Conference Proceedings 1788 (1), 030071, 2017	2017
181	Microstructure analysis in friction welding of copper and aluminum Google Scholar 👨‍🔬 AGW Wibowo, R Ismail, J Jamari 📚 AIP Conference Proceedings 1725 (1), 020095, 2016	2016
182	Radial forces analysis and rotational speed test of radial permanent magnetic bearing for horizontal axis wind turbine applications Google Scholar 👨‍🔬 Kriswanto, Jamari 📚 AIP Conference Proceedings 1725 (1), 020034, 2016	2016
183	Reverse innovative design from 3D mesh to 3D model of insole shoe orthotic Google Scholar 👨‍🔬 PW ANGGORO, B BAWONO, A Wicaksono, J Jamari, AP Bayusena	2016
184	A numerical investigation of mechanical behavior of unfilled styrene-butadiene rubber by static straight blade indentation Google Scholar 👨‍🔬 B Setiyana, R Ismail, J Jamari, DJ Schipper 📚 Proceedings of Malaysian International Tribology Conference 2015, 68-69, 2015	2015
185	Hydrothermally synthesized nano precipitated calcium carbonate from natural asphalt extraction residues for use with polyvinyl chloride composite Google Scholar 👨‍🔬 M Ambarita, YM Pusparizkita, WW Schmahl, YC Setiawan, ... 📚 Next Materials 8, 100928, 2025	2025
186	The synergistic influence of texture and slip formations in hydrodynamic thrust bearings on tribological characteristics Google Scholar 👨‍🔬 I Syafaat, ZIH Rois, M Muchammad, M Tauviqirrahman, B Setiyana, ... 📚 Results in Engineering 21, 101779, 2024	2024
187	Elastohydrodynamic analysis of composite material with roughness effect on multistep journal bearing tribological performance Google Scholar 👨‍🔬 M Muchammad, M Tauviqirrahman, S Farhansyah, M Iqbal, B Setiyana, ... 📚 Jurnal Tribologi 40, 39-60, 2024	2024
188	Development of ceramic jewellery industry in the form of necklaces with Indonesian batik motifs Google Scholar 👨‍🔬 T Yuniarto, PW Anggoro, B Bawono, PK Fergiawan, AP Bayuseno, ... 📚 Proceedings of 7th International Conference on Industrial, Mechanical …, 2023	2023
189	CALCINATION AND HYDROTHERMAL PROCESSING OF BOVINES BONES FOR CALCIUM PHOSPHATES EXTRACTION. Google Scholar 👨‍🔬 MA Irfa'i, A Prihanto, S Muryanto, R Ismail, J Jamari, AP Bayuseno 📚 Rasayan Journal of Chemistry 16 (3), 2023	2023
190	CFD analysis of hydrodynamic journal bearing with Bingham plastic lubricant considering roughness Google Scholar 👨‍🔬 M Tauviqirrahman, P Paryanto, BO Pugastri, AP Hamonangan, ... 📚 Cogent Engineering 10 (1), 2213537, 2023	2023
191	Rotor Power Optimization of Horizontal Axis Wind Turbine from Variations in Airfoil Shape, Angle of Attack, and Wind Speed Google Scholar 👨‍🔬 F Romadlon, DH Al-Janan, W Aryadi, RF Naryanto, S Anis, I Sukoco 📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 94 (1 …, 2022	2022
192	Precipitated calcium carbonate derived from Green Mussel Shells extracted from Magnesium Chloride containing solution Google Scholar 👨‍🔬 MA Irfa’i, A Prihanto, S Muryanto, J Jamari, R Ismail, AP Bayuseno 📚 IOP Conference Series: Earth and Environmental Science 1098 (1), 012021, 2022	2022
193	Utilization of green mussel shell waste for calcium carbonate synthesis through the carbonation method with temperature variation Google Scholar 👨‍🔬 A Prihanto, S Muryanto, R Ismail, J Jamari, AP Bayuseno 📚 IOP Conference Series: Earth and Environmental Science 1098 (1), 012022, 2022	2022
194	Flame spray coating of α-tricalcium phosphate on AISI 316L alloy Google Scholar 👨‍🔬 RB Taqriban, DF Fitriyana, R Ismail, J Jamari, AP Bayuseno 📚 Cogent Engineering 9 (1), 2113014, 2022	2022
195	Study of wear performance of crosslinking UHMWPE acetabular liner for artificial hip joint made from CNC milling Google Scholar 👨‍🔬 WD Lestari, A Nugroho, R Ismail, J Jamari, AP Bayuseno 📚 IOP Conference Series: Materials Science and Engineering 1078 (1), 012009, 2021	2021
196	Simulation of manufacturing strategy of an orthotic boots shoe insole product with a Computer-Aided Manufacturing for club foot patient Google Scholar 👨‍🔬 JAPB P.K. Fergiawan, P.W. Anggoro, A.A. Anthony, M. Tauviqirrahman 📚 IOP Conference Series: Materials Science and Engineering 1034, 012095, 2021	2021
197	Computer-Aided design for analyzing the influence of single radius on flexion angle of artificial knee joint Google Scholar 👨‍🔬 D Darmanto, R Novriansyah, R Ismail, J Jamari, AP Bayuseno, ... 📚 2021 IEEE International Biomedical Instrumentation and Technology Conference …, 2021	2021
198	Inertia and slip effect on a single textured hydrodynamic thrust bearing using CFD methods Google Scholar 👨‍🔬 M Muchammad, O Triandani, M Tauviqirrahman, F Hilmy, J Jamari 📚 Journal of Physics: Conference Series 1517 (1), 012011, 2020	2020
199	Risk of impingement on polyethylene liner of total hip arthroplasty prosthesis during muslim prayer (Salat) activity Google Scholar 👨‍🔬 IB Anwar, E Saputra, R Ismail, J Jamari, E Van der Heide 📚 Open Access Macedonian Journal of Medical Sciences 8 (F), 65-69, 2020	2020
200	Simulasi Performa Turbin Propeller Dengan Sudut Pitch Yang Divariasikan Google Scholar 👨‍🔬 P Pribadyo, H Hadiyanto, J Jamari 📚 Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi 6 (1), 54-63, 2020	2020
201	The Modeling Of A Conceptual Engineering Design System Using The Decision-Matrix Logic Google Scholar 👨‍🔬 S Ramdhani, J Jamari 📚 MATEC Web of Conferences 159, 02022, 2018	2018
202	The influence of tool path strategies on surface roughness and machining time in the CNC milling of UHMWPE Google Scholar 👨‍🔬 APB W.D. Lestari , P.W. Anggoro , P.K. Fergiawan , R. Ismail, J. Jamari 📚 Journal of Engineering and Applied Sciences 13 (1), 259-263, 2018	2018
203	The Evaluation of the Use of AFO (Ankle Foot Orthotics) with the MOXFQ (Manchester-Oxford Foot Questionnaire) Method Google Scholar 👨‍🔬 B Bawono 📚 Proceedings of the International Conference on Science and Technology (ICST …, 2018	2018
204	Inertia effect of textured lubricated contact on the bearing performance using CFD approach Google Scholar 👨‍🔬 F Hilmy, M Muchammad, M Tauviqirrahman, J Jamari 📚 Journal of Physics: Conference Series 1090 (1), 012041, 2018	2018
205	Theoretical investigation of boundary slip on the hydrodynamic lubrication performance in pocketed bearings including cavitation Google Scholar 👨‍🔬 M Muchammad, M Tauviqirrahman, AW Pratomo, J Jamari, DJ Schipper 📚 International Journal of Surface Science and Engineering 11 (2), 100-117, 2017	2017
206	The effect of linear spring number at side load of McPherson suspension in electric city car Google Scholar 👨‍🔬 SS Budi, A Suprihadi, A Makhrojan, R Ismail, J Jamari 📚 AIP Conference Proceedings 1788 (1), 030076, 2017	2017
207	The von Mises stress distribution on the surface of UHMWPE with texture-shaped variation in the presence of normal load and dry sliding contact Google Scholar 👨‍🔬 WD Lestari, J Jamari, AP Bayuseno 📚 AIP Conference Proceedings 1831 (1), 020055, 2017	2017
208	Investigation of the Influence of Shapes-Texture on Surface Deformation of UHMWPE as a Bearing Material in Static Normal Load and Rolling Contact Google Scholar 👨‍🔬 WD Lestari, R Ismail, J Jamari, AP Bayuseno 📚 IOP Conference Series: Materials Science and Engineering 202 (1), 012098, 2017	2017
209	The effect of the wall thickness on wear of an UHMWPE acetabular liner Google Scholar 👨‍🔬 J Jamari, A Hidayat, E Saputra, IB Anwar, R Ismail, E van der Heide 📚 Advanced Materials Research 1123, 196-200, 2015	2015
210	Perhitungan Keausan Pin pada Sistem Kontak Sliding Pin-on-disc Menggunakan Metode Analitik dan Metode Elemen Hingga Google Scholar 👨‍🔬 E SAPUTRA, J JAMARI 📚 Mechanical Engineering Departement of Diponegoro University, 2010	2010
211	Fixture design effects on posterior dental implant stability using finite element analysis (FEA): a systematic review Google Scholar 👨‍🔬 K Kriswanto, J Jamari, R Andika, AP Bayuseno, AA Yusuf, MI Ammarullah 📚 Head & Face Medicine, 2025	2025
212	Control design of vibrotactile stimulation on weighted vest for deep pressure therapy Google Scholar 👨‍🔬 FA Husaini, MI Maula, MI Ammarullah, IY Afif, MDP Lamura, J Jamari, ... 📚 bmj 13, 4952, 2024	2024
213	The Effect of Depolymerization Treatment on Modified Properties of Chitosan Derived from Crab Shells as a Candidate for Bioabsorbable Screw Materials Google Scholar 👨‍🔬 DF Fitriyana, R Ismail, AP Bayuseno, S Anis, B Priwintoko, Y Subagyo, ... 📚 J. Adv. Res. Fluid Mech. Therm. Sci. 2 (2), 56-66, 2024	2024
214	A scoping review of the additive manufacturing of mandibular implants Google Scholar 👨‍🔬 R Winarso, R Ismail, PW Anggoro, J Jamari, AP Bayuseno 📚 Frontiers in Mechanical Engineering 9, 1-16, 2023	2023
215	Study of slip and cavitation condition in the open pocket hydrodynamic thrust bearing Google Scholar 👨‍🔬 I Syafaat, RA Ababil, RC Gunawan, M Tauviqirrahman, E Yohana, ... 📚 Jurnal Tribologi 37, 58-75, 2023	2023
216	Performance analysis of a new design concept of journal bearing with surface roughness Google Scholar 👨‍🔬 M Tauviqirrahman, J Jamari, B Setiyana, M Muchammad, D Prabowo 📚 Jurnal Tribologi 38, 1-18, 2023	2023
217	Optimization fused deposition modeling parameter of interference screw using full factorial design Google Scholar 👨‍🔬 LPS Hartanti, PW Anggoro, R Ismail, J Jamari, AP Bayuseno 📚 2023 IEEE International Biomedical Instrumentation and Technology Conference …, 2023	2023
218	Design and production of multifunctional food oven with energy-saving gas fuel Google Scholar 👨‍🔬 W Sumbodo, Kriswanto, A Setiyawan, J Pamiyanto, DH Hadikawuryan, ... 📚 IOP Conference Series: Earth and Environmental Science 969 (1), 012023, 2022	2022
219	Stress and displacement analysis of powder packaging machine of capacity 2,600 pcs/hours Google Scholar 👨‍🔬 DH Al-Janan, Kriswanto, R Unggul, A Roziqin, RD Widodo, A Hangga, ... 📚 IOP Conference Series: Earth and Environmental Science 969 (1), 012018, 2022	2022
220	A numerical investigation of the sliding contact between a rigid spherical indenter and a rubber surface: The effect of sliding depth and surface roughness Google Scholar 👨‍🔬 B Setiyana, J Jamari, R Ismail, DJ Schipper 📚 Jurnal Tribologi 33, 20-30, 2022	2022
221	Thermo-hydrodynamic analysis of multistep texture effect on the performance of journal bearings through acoustic and tribological characteristics Google Scholar 👨‍🔬 M Muchammad, M Tauviqirrahman, L Mario, J Jamari 📚 Journal of the Brazilian Society of Mechanical Sciences and Engineering 44 …, 2022	2022
222	The Effect of The Machining Process UHMWPE on The Wear Behaviour of Acetabular Cups for Hip Implants. Google Scholar 👨‍🔬 WD Lestari, R Ismail, AT Danaryanto, J Jamari, AP Bayuseno, A Nugroho 📚 Journal of Mechanical Engineering (1823-5514) 19 (3), 2022	2022
223	Data transfer analysis of the homogeneous rough surface of a solid model into a CAE system with varying file data formats Google Scholar 👨‍🔬 K Kartini, GA Sipayung, R Ismail, J Jamari, AP Bayuseno 📚 Cogent Engineering 9 (1), 2034265, 2022	2022
224	Reuse of wheat flour liquid waste for enzymatic hydrolysis to yield glucose-derived bioethanol Google Scholar 👨‍🔬 NK Sari, IY Purbasari, PW Anggoro, J Jamari, AP Bayuseno 📚 Cogent Engineering 9 (1), 2101229, 2022	2022
225	Stress analysis bottom plate block B-03 on patrol ship construction using finite element methods Google Scholar 👨‍🔬 SF Khristyson, AP Bayuseno, Jamari 📚 IOP Conference Series: Materials Science and Engineering 1034 (1), 012004, 2021	2021
226	Design of Fishing Vessel 5 GT for Traditional Fishing Community Activities Google Scholar 👨‍🔬 SF Khristyson, AP Bayuseno, Jamari 📚 IOP Conference Series: Materials Science and Engineering 1096 (1), 012030, 2021	2021
227	Static Structural Analysis of the Sports Utility Vehicles Patriot Chassis Google Scholar 👨‍🔬 W Aryadi, Kriswanto, A Roziqin, J Jamari 📚 IOP Conference Series: Earth and Environmental Science 700 (1), 012006, 2021	2021
228	Evaluation of extreme hip joint movement after total hip arthroplasty: A retrospective study Google Scholar 👨‍🔬 IB Anwar, E van der Heide, J Jamari, E Saputra, A Santoso, D Adriansyah, ... 📚 Open Access Macedonian Journal of Medical Sciences 9, 1296-1300, 2021	2021
229	Study of low head turbine propellers axial flow for use of micro-hydropower plant (MHP) in Aceh, Indonesia Google Scholar 👨‍🔬 Pribadyo, H Hadiyanto, J Jamari 📚 Journal of Physics: Conference Series 1524 (1), 012019, 2020	2020
230	The morphology aspect of CaCO3 scale impact of solenoid magnetic field in the various flow rate solution in the piping system Google Scholar 👨‍🔬 S Sutomo, S Muryanto, W Mangestiono, J Jamari, AP Bayuseno 📚 Materials Today: Proceedings 13, 287-292, 2019	2019
231	The kinetic aspect of CaCO3 scale formation in the solenoid magnetic field in the various temperatures of solution in piping system Google Scholar 👨‍🔬 S Sutomo, S Muryanto, W Mangestiono, J Jamari, AP Bayuseno 📚 Materials Today: Proceedings 13, 299-304, 2019	2019
232	Effect of eccentricity ratio on the hydrodynamic performance of journal bearing considering cavitation Google Scholar 👨‍🔬 S Susilowati, F Hilmy, D Arfiandani, Muchammad, M Tauviqirrahman, ... 📚 AIP Conference Proceedings 2097 (1), 030068, 2019	2019
233	The effect of femoral head size on the cement mantle in the layered artificial hip joint Google Scholar 👨‍🔬 IBA Gilar Pandu Annanto, Jamari, Eko Saputro, Athanasius Priharyoto Bayuseno ... 📚 American Institute of Physics 2114 (1), 060015, 2019	2019
234	Synthesis of Struvite using a Vertical Canted Reactor with Continuous Laminar Flow Process Google Scholar 👨‍🔬 S Sutiyono, L Edahwati, S Muryanto, J Jamari, AP Bayuseno 📚 Journal of Physics: Conference Series 953 (1), 012244, 2018	2018
235	Rancang Bangun Alat Uji Keausan Berbasis Sistem Kontak Disc-On-Disc Google Scholar 👨‍🔬 J Jamari, M Effendy, D Ardiansyah 📚 Turbo: Jurnal Program Studi Teknik Mesin 7 (1), 2018	2018
236	Comparison between non-Newtonian and Newtonian lubrication of journal bearing considering cavitation using CFD Google Scholar 👨‍🔬 AW Pratomo, M Tauviqirrahman, M Muchammad, AP Bayuseno, J Jamari 📚 International Journal of Applied Engineering Research 12 (7), 1190-1193, 2017	2017
237	Redesigning the continuous vacuum sealer packaging machine to improve the processing speed Google Scholar 👨‍🔬 JB Belo, SA Widyanto, J Jamari 📚 AIP Conference Proceedings 1788 (1), 030074, 2017	2017
238	Optimization of Manufacturing Process Parameters for the Product of ISO-Diabetes Patients with High Risk Classes Google Scholar 👨‍🔬 PW Anggoro, B Bawono, J Wibowo, J Jamari, AP Bayuseno 📚 Advanced Science Letters 23 (12), 11910-11917, 2017	2017
239	Influence of Citric Acid on Struvite Precipitation Google Scholar 👨‍🔬 DS Perwitasari, J Jamari, S Muryanto, AP Bayuseno 📚 Advanced Science Letters 23 (12), 12231-12234, 2017	2017
240	Modeling and optimization of CaCO3 precipitated from laminar-flow water in the presence of citric acid at an elevated temperature Google Scholar 👨‍🔬 S Raharjo, S Muryanto, J Jamari, AP Bayuseno 📚 International Journal of Applied Engineering Research 11 (15), 8533-8539, 2016	2016
241	Finite element analysis of the impingement on the acetabular liner rim due to wear of the acetabular liner surface Google Scholar 👨‍🔬 E Saputra, IB Anwar, R Ismail, J Jamari, E Van Der Heide 📚 AIP Conference Proceedings 1725 (1), 020074, 2016	2016
242	Estimation of appropriate lubricating film thickness in ceramic-on-ceramic hip prostheses Google Scholar 👨‍🔬 M Tauviqirrahman, Muchammad, AP Bayuseno, R Ismail, E Saputra, ... 📚 AIP Conference Proceedings 1725 (1), 020090, 2016	2016
243	Tribological characteristic enhancement effects by polymer thickened oil in lubricated sliding contacts Google Scholar 👨‍🔬 AW Pratomo, Muchammad, M Tauviqirrahman, Jamari, AP Bayuseno 📚 AIP Conference Proceedings 1725 (1), 020060, 2016	2016
244	Investigation on the elastic modulus of rubber-like materials by straight blade indentation using numerical analysis Google Scholar 👨‍🔬 B Setiyana, FD Wicahyo, R Ismail, J Jamari, DJ Schipper 📚 Advanced Materials Research 1123, 55-58, 2015	2015
245	The effect of a hydrophobic coating material on friction in a micro-slider bearing: a numerical analysis Google Scholar 👨‍🔬 M Tauviqirrahman, M Muchammad, R Ismail, J Jamari, DJ Schipper 📚 Advanced Materials Research 1123, 42-45, 2015	2015
246	Modeling of repeated rolling contact on rough surface: Surface topographical change Google Scholar 👨‍🔬 R Ismail, E Saputra, M Tauviqirrahman, J Jamari, DJ Schipper 📚 Advanced Materials Research 896, 642-645, 2014	2014
247	Kaji eksperimental running-in pada kontak rolling-sliding pasangan material aluminium dengan baja S45C Google Scholar 👨‍🔬 N Supriyana, P Londa, T Hidayat, J Jamari, S Nugroho 📚 Rotasi 15 (2), 18-23, 2013	2013
248	Pengaruh Sudut Pitch Propeler Terhadap Gaya Dorong Pada Controllable Pitch Propeler Google Scholar 👨‍🔬 LY Sutadi 📚 Jurusan Teknik Mesin, Politeknik Negeri Semarang, 2012	2012
249	Analisa pengaruh kekasaran permukaan dan slip terhadap performansi pelumasan pada kontak sliding menggunakan metode volume hingga Google Scholar 👨‍🔬 R Wijaya, J JAMARI 📚 Mechanical Engineering Departement of Diponegoro University, 2011	2011
250	Wall slip effects in a lubricated MEMS Google Scholar 👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper 📚 International journal of energy machinery 4 (1), 13-22, 2011	2011
251	The Observation of the steady state phase on rolling contact using finite element analysis Google Scholar 👨‍🔬 R Ismail, M Tauviqirrahman, Jamari, DJ Schipper 📚 AIP Conference Proceedings 1415 (1), 136-139, 2011	2011
252	Analisa kontak elastis antar hemispheres menggunakan metode Elemen Hingga Google Scholar 👨‍🔬 A Yusra, I Haryanto, J Jamari 📚 Rotasi 10 (1), 1-5, 2008	2008
253	Criterion for surface contact deformation of metals Google Scholar 👨‍🔬 J Jamari, DJ Schipper 📚 Tribotest 13 (1), 1-11, 2007	2007
254	Design, Fabrication, and Performance Testing of PMMA Interference Screws Prepared by 3D Printing Methods Google Scholar 👨‍🔬 R Ismail, DF Fitriyana, AP Bayuseno, B Priwintoko, Y Subagyo, M Afrizal, ... 📚 Journal of Advanced Research in Applied Mechanics 128 (1), 86-95, 2025	2025
255	Analyzing spinopelvic parameter differences between standing and supine position Google Scholar 👨‍🔬 A Prasetya, D Nabih, A Santoso, J Jamari, T Winarni 📚 Journal of Musculoskeletal Surgery and Research 9 (1), 11-27, 2025	2025
256	Microstructure examination of the biocorrosion susceptibility of mild steel coated with Zn and Zn-CaCO3 in a biodiesel environment Google Scholar 👨‍🔬 VA Fardilah, I Alkian, YM Pusparizkita, C Aslan, M Tauviqirrahman, ... 📚 Next Materials 9, 101075, 2025	2025
257	Synthesizing calcium phosphate powder from bovine bone wastes using calcination and hydrothermal techniques to evaluate physicochemical properties and mineralogy speciation Google Scholar 👨‍🔬 YM Pusparizkita, WW Schmahl, GDA Satria, R Ismail, J Jamari, ... 📚 Sustainable Chemistry for Climate Action, 100165, 2025	2025
258	The tribological performance identification of a tire tread block during friction contact: A numerical investigation Google Scholar 👨‍🔬 B Setiyana, M Muchammad, M Tauviqirrahman, J Jamari, E Saputra 📚 vol 41, 81-92, 2024	2024
259	Hydrodynamic lubrication analysis of journal bearing considering cavitation, slip and thermal condition Google Scholar 👨‍🔬 M Tauviqirrahman, M Wijaya, M Muchammad, P Paryanto, J Jamari 📚 J. Tribol 42, 1-20, 2024	2024
260	Microstructural properties and Adhesive Strength of 316L Stainless Steel Coated with Hydroxyapatite Derived from Mussel Shell Wastes via Flame Spray Deposition. Google Scholar 👨‍🔬 M Amin, R Ismail, J Jamari, AP Bayuseno 📚 Jordan Journal of Mechanical & Industrial Engineering 18 (4), 2024	2024
261	The effect of carbon dioxide absorption using buton asphalt residue through carbonation on calcium carbonate precipitated efficiency Google Scholar 👨‍🔬 M Ambarita, YM Pusparizkita, WW Schmahl, MDP Lamura, J Jamari, ... 📚 IOP Conference Series: Earth and Environmental Science 1268 (1), 012037, 2023	2023
262	Optimization of parameter for cutting condition of uhmwpe acetabular cup based on taguchi and desirability functions Google Scholar 👨‍🔬 YAW Ninggar, PW Anggoro, B Bawono, DB Setyohad, M Tauviqirrahman, ... 📚 Cogent Engineering 10 (1), 2233247, 2023	2023
263	Analisis pembebanan tekanan pada rangka bawah surgery smart chair untuk dokter bedah laparoskopi dengan Solidworks Google Scholar 👨‍🔬 ML Ridlwan, J Jamari, M Tauviqirrahman 📚 JURNAL TEKNIK MESIN 10 (2), 255-260, 2022	2022
264	Investigation of the influence of turbulence to tribological performance on smooth and multistep journal bearing with hydrodynamics simulation Google Scholar 👨‍🔬 M Muchammad, DDP Wibowo, M Tauviqirrahman, B Setiyana, E Yohana, ... 📚 Frontiers in Mechanical Engineering 8, 946074, 2022	2022
265	Simulation and Optimization of Machining Time During Milling AISI P20 Steel Google Scholar 👨‍🔬 W Sumbodo, Kriswanto, J Jamari 📚 IOP Conference Series: Earth and Environmental Science 700 (1), 012002, 2021	2021
266	Application of Computer-Aided Reverse Engineering System in the Design of Orthotic Boots for Clubfoot Patients Google Scholar 👨‍🔬 APB P.K. Fergiawan, P.W. Anggoro, Rifky Ismail, J. Jamari 📚 Journal of Southwest Jiaotong University 56 (3), 405-418, 2021	2021
267	Mechanical Properties Identification of Vulcanized Rubber by Using Mooney-Rivlin Method Google Scholar 👨‍🔬 B Setiyana, R Ismail, J Jamari, I Haryanto 📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021	2021
268	Computational Fluid Dynamic (CFD) Analysis of Propeller Turbine Runner Blades using various Blade Angles Google Scholar 👨‍🔬 P Pribadyo, H Hadiyanto, J Jamari 📚 International Energy Journal 21 (3), 385-400, 2021	2021
269	Mechanical Properties of Polycarbonate Urethane (PCU) for Orthopedic Devices: Fabrication with Compression Molding Google Scholar 👨‍🔬 WD Lestari, R Ismail, J Jamari, AP Bayuseno 📚 Recent Advances in Manufacturing Engineering and Processes: Proceedings of …, 2021	2021
270	Wear property of machined ultra high molecular weight polyethylene (UHMWPE) acetabular liner product with CNC milling Google Scholar 👨‍🔬 WD Lestari, AT Danaryanto, A Nugroho, R Ismail, J Jamari, AP Bayuseno 📚 J Mech Eng Sci Technol 5, 110-122, 2021	2021
271	Contact mechanism between shaft, key, and crank in the sand sieving machine Google Scholar 👨‍🔬 G Kurnia, B Yulianto, J Jamari, AP Bayuseno, M Tauviqirrahman 📚 AIP Conference Proceedings 2262 (1), 030015, 2020	2020
272	Optimization of Key Parameters in Struvite (K) Production for Phosphorus and Potassium Recovery Using a Batch Crystallizer Google Scholar 👨‍🔬 S Muryanto 📚 Rasayan Journal of Chemistry, 2019	2019
273	Considering Social Aspects of Geothermal Project: The Case of Social Mapping of Geothermal Project on Mount Ungaran Google Scholar 👨‍🔬 YZD Budi Setiyono, Agus Setyawan, Jamari, Heru Susanto, Eko Punto ... 📚 E3S Web of Conferences 125, 10009, 2019	2019
274	Redesigning of 4 (Four) Blades Propeller Installed in a Wooden Fishing Boat in a Ship Yard in Tegal, Central Java Province Google Scholar 👨‍🔬 F Firdaus 📚 Marine Fisheries: Journal of Marine Fisheries Technology and Management, 2019	2019
275	The influence of wave frequency of solenoid magnetic field on CaCO3 scale formation in piping system Google Scholar 👨‍🔬 Sutomo, S Muryanto, W Mangestiono, J Jamari, AP Bayuseno 📚 AIP Conference Proceedings 2097 (1), 030063, 2019	2019
276	Semi reverse innovative design of insole shoes orthotic for patient with club foot Google Scholar 👨‍🔬 AA Anthony, PW Anggoro, T Yuniarto, B Bawono, AP Bayuseno, J Jamari 📚 2019 International Biomedical Instrumentation and Technology Conference …, 2019	2019
277	The effect of layer variation between liner and cement mantle on reducing cracks of PMMA material hip joints Google Scholar 👨‍🔬 E Saputra, J Jamari, HA Lie, IB Anwar, R Ismail, M Tauviqirrahman, ... 📚 E3S Web of Conferences 73, 12013, 2018	2018
278	Optimized phosphate recovery through MAP precipitation in an air agitated column reactor Google Scholar 👨‍🔬 L Edahwati, S Sutiyono, S Muryanto, J Jamari, AP Bayuseno 📚 Oriental Journal of Chemistry 34 (6), 3044, 2018	2018
279	Material Power Influence of Bucket Teeth Excavatoraisi 4140 Using Abrasive Wear Test With Ogoshi Universal High Speed Google Scholar 👨‍🔬 SH Suryo, AP Bayuseno, J Jamari, H Kiswanto 📚 Global Journal of Advanced Engineering Technologies and Sciences 5, 54-64, 2018	2018
280	Cavitation modelling effect on pressure distribution of inclined lubricated contacts and textured surfaces using CFD Google Scholar 👨‍🔬 N Almaida, MR Prasetyaji, MH Mufian, AR Hakim, M Tauviqirrahman, ... 📚 Journal Tribologi 22, 40-48, 2018	2018
281	Controlling of magnesium carbonate scale deposition on the piping system with laminar flow and in the presence of alumina Google Scholar 👨‍🔬 S Raharjo, S Muryanto, J Jamari, AP Bayuseno 📚 AIP Conference Proceedings 1977 (1), 020064, 2018	2018
282	CFD analysis of texture depth effect on the performance of hydrodynamic lubricated bearing Google Scholar 👨‍🔬 M Muchammad, F Hilmy, M Tauviqirrahman, J Jamari, DJ Schipper 📚 Journal of Physics: Conference Series 1090 (1), 012067, 2018	2018
283	Effect of texture shape on the hydrodynamic lubrication performance of the sliding textured contact: a numerical approach Google Scholar 👨‍🔬 Susilowati, M Tauviqirrahman, J Jamari, AP Bayuseno 📚 Journal of Physics: Conference Series 1090 (1), 012027, 2018	2018
284	Influence of boundary slip layout on the hydrodynamic performance of partially textured journal bearing by CFD method Google Scholar 👨‍🔬 RAAJ Mohammad Tauviqirrahman, Muchammad 📚 MATEC Web of Conferences 204, 04008, 2018	2018
285	Study the effect of wear rate on impingement failure of an acetabular liner surface based on finite element analysis Google Scholar 👨‍🔬 E Saputra, IB Anwar, EVD Heide, R Ismail, J Jamari 📚 International Journal of Materials and Product Technology 55 (4), 340-353, 2017	2017
286	CFD analysis of artificial slippage and surface texturing in lubricated sliding contact considering cavitation Google Scholar 👨‍🔬 AW Pratomo, RR Romadhon, Muchammad, M Tauviqirrahman, J Jamari, ... 📚 AIP Conference Proceedings 1788 (1), 030068, 2017	2017
287	Vector Analysis of Ionic Collision on CaCO3 Precipitation Based on Vibration Time History Google Scholar 👨‍🔬 W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno 📚 IOP Conference Series: Materials Science and Engineering 202 (1), 012100, 2017	2017
288	The use of curve wizard method for generating rough surface in CAD model and data transferring analysis in CAE model Google Scholar 👨‍🔬 GA Sipayung, E Saputra, R Ismail, J Jamari, AP Bayuseno 📚 2017 International Conference on Sustainable Information Engineering and …, 2017	2017
289	A temperature-mediated precipitation of struvite-family crystals in wastewater Google Scholar 👨‍🔬 S Sutiyono, L Edahwati, S Muryanto, J Jamari, AP Bayuseno 📚 International Journal of ChemTech Research 9 (8), 486-494, 2016	2016
290	The effect of boundary slip and cavitation on hydrodynamic pressure generation in pocket bearings Google Scholar 👨‍🔬 Muchammad, M Tauviqirrahman, AW Pratomo, J Jamari, DJ Schipper 📚 AIP Conference Proceedings 1725 (1), 020048, 2016	2016
291	Numerical Modelling of Surface Texturing of UHMWPE under Influence of Normal Load Google Scholar 👨‍🔬 WD Lestari, FH Priyoga, J Jamari, AP Bayuseno 📚 Materials Science Forum 864, 8-12, 2016	2016
292	Perancangan Above Knee Prosthetic untuk Pasien Amputasi Kaki Di Atas Lutut Google Scholar 👨‍🔬 J Jamari, AR Ismawan 📚 ROTASI 17 (2), 93-97, 2015	2015
293	Load Support Improvement on Superhydrophobic Surface in Lubricated-MEMS Using Numerical Investigation Google Scholar 👨‍🔬 M Muchammad, M Tauviqirrahman, J Jamari, DJ Schipper 📚 Advanced Materials Research 1123, 3-6, 2015	2015
294	Friction characteristics of liquid lubricated MEMS with deterministic boundary slippage Google Scholar 👨‍🔬 M Tauviqirrahman, M Muchammad, R Ismail, J Jamari, DJ Schipper 📚 Jurnal Teknologi 66 (3), 75-80, 2014	2014
295	Computational analysis of the lubricated-sliding contact with artificial slip boundary Google Scholar 👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper 📚 International journal of applied mathematics & statistics 35 (5), 67-80, 2013	2013
296	Perancangan Kursi Autisme untuk Mobil sebagai Alat Bantu Terapi Autisme Google Scholar 👨‍🔬 GK Naufal, A Raswan, SH Suryo, J Jamari, I Haryanto 📚 ROTASI 15 (3), 19-24, 2013	2013
297	A test method to study the change in surface topography due to running‐in of a rolling contact Google Scholar 👨‍🔬 J Jamari, DJ Schipper 📚 Lubrication Science 25 (5), 369-377, 2013	2013
298	Karakteristik AISI 304 Sebagai Material Friction Welding Google Scholar 👨‍🔬 M Fawaid, R Ismail, S Nugroho 📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2012	2012
299	Optimasi Daerah Slip pada Permukaan Bertekstur pada Pelumasan MEMS (Micro Electro Mechanical Systems) Google Scholar 👨‍🔬 A ZULFIKAR, J JAMARI 📚 Mechanical Engineering Departement of Diponegoro University, 2011	2011
300	Analisa Kontak Statis Permukaan Kasar Berbasis Elemen Hingga Google Scholar 👨‍🔬 J Jamari 📚 Rotasi 13 (2), 13-17, 2011	2011
301	Perhitungan Keausan pada Kontak Rolling-Sliding Google Scholar 👨‍🔬 E Saputra, R Ismail, M Tauviqirrahman, JJ Jamari 📚 Seminar Nasional Teknologi Informasi & Komunikasi Terapan (Semantik), 2011	2011
302	Effect of Boundary Slip on The Load Support in A Lubricated Sliding Contact Google Scholar 👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper 📚 AIP Conference Proceedings 1415 (1), 51-54, 2011	2011
303	Finite Element Analysis of Sliding Contact of A Hard Cylinder on A Layered Elastic-Plastic Solid Google Scholar 👨‍🔬 R Ismail, M Tauviqirrahman, J Jamari, DJ Schipper 📚 ICAME: Proceedings of International Conference on Advances Mechanical …, 2009	2009
304	Running-in as an Engineering Optimization Google Scholar 👨‍🔬 J Jamari 📚 J@ ti Undip: Jurnal Teknik Industri 2 (1), 1-10, 2007	2007
305	Finite Element Analysis of Ti-6Al-4V Lattice Cubic Scaffolds for Mandibular Bone Implant Applications Google Scholar 👨‍🔬 YKP Saleh, R Ismail, J Jamari, IN Jujur, S Suryadi, R Winarso, T Anggara 📚 Advances in Technology Innovation 10 (3), 283-295, 2025	2025
306	Exploring wear characteristics of AISI 1045 steel under variable disc rotation speeds: a tribological investigation Google Scholar 👨‍🔬 IY Afif, J Jamari, E Saputra, S Saefudin, M Subri, M Amin 📚 Teknik 45 (1), 111-116, 2024	2024
307	The contact pressure analysis of different load and diameter ratio on hemispherical contact: biomechanical perspectives/M. Danny Pratama Lamura...[et al.] Google Scholar 👨‍🔬 M Lamura, CB Achmad, MI Ammarullah, MI Maula, FA Husaini, ... 📚 Journal of Mechanical Engineering (JMechE) 13 (1), 55-73, 2024	2024
308	Process Parameter Optimization of Material Extrusion-Based Additive Manufacturing of 3D Printed-Biocomposite Interference Screw for Anterior Cruciate Ligament Reconstruction. Google Scholar 👨‍🔬 LPS Hartanti, R Ismail, J Jamari, AP Bayuseno 📚 International Review of Mechanical Engineering 18 (5), 222, 2024	2024
309	Finite element analysis of irregular porous scaffold for bone tissue engineering Google Scholar 👨‍🔬 R Winarso, R Ismail, PW Anggoro, J Jamari, AP Bayuseno 📚 Journal of Engineering and Applied Sciences 18 (6), 569-680, 2023	2023
310	Analysis of a radial permanent magnetic bearing for 1 MW horizontal axis wind turbine Google Scholar 👨‍🔬 Kriswanto, NB Al Afkar, DH Al-Janan, Rusiyanto, J Jamari 📚 AIP Conference Proceedings 2609 (1), 030005, 2023	2023
311	CFD analysis of single open pocket and multi textured surface in hydrodynamic lubrication performance of thrust bearings Google Scholar 👨‍🔬 Muchammad, M Tauviqirrahman, F Risqulah, B Setiyana, Jamari 📚 3rd Borobudur International Symposium on Science and Technology 2021 2706 (1 …, 2023	2023
312	2D finite element deformation investigation on CoCrMo-on-CoCrMo bearing of total hip implant under normal walking condition Google Scholar 👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, ... 📚 ENGINEERING PHYSICS INTERNATIONAL CONFERENCE 2021–EPIC 2021 2580 (1), 050001, 2023	2023
313	Artificial Intelligence and Machine Learning in Prediction of Total Hip Arthroplasty Outcome: A Bibliographic Review Google Scholar 👨‍🔬 I Yuniar Purbasari, A Priharyoto Bayuseno, RR Isnanto, T Indah Winarni, ... 📚 E3S Web of Conferences 448, 02054, 2023	2023
314	Numerical study of comparison of thrust bearing slip-no slip condition on acoustic performance Google Scholar 👨‍🔬 I Syafaat, LR Sari, M Muchammad, M Tauviqirrahman, E Yohana, ... 📚 CFD Letters 15 (9), 1-17, 2023	2023
315	Use of hydroxyapatite powder derived from green mussel shell wastes for coating on AISI 316L Google Scholar 👨‍🔬 M Amin, R Ismail, J Jamari, AP Bayuseno 📚 IOP Conference Series: Earth and Environmental Science 1268 (1), 012035, 2023	2023
316	Deep touch pressure for calming and comfort therapy from the perspective of contact mechanics: A review Google Scholar 👨‍🔬 MI Maula, TI Winarni, MI Ammarullah, IY Afif, FA Husaini, MDP Lamura, ... 📚 Mechanical Engineering for Society and Industry 3 (3), 181-190, 2023	2023
317	2D finite element study of contact pressure on CoCrMo-on-CoCrMo total hip arthroplasty during peak loading based on body mass index Google Scholar 👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, ... 📚 AIP Conference Proceedings 2578 (1), 070003, 2022	2022
318	Application of semi reverse innovative design for a boot's shoes orthotic for children with club foot Google Scholar 👨‍🔬 APBMT P.W. Anggoro, Y.K. Nugrahanto, A.A. Anthony, Jamari 📚 IOP Conference Series: Materials Science and Engineering 1034, 012006, 2021	2021
319	Optimization Wire-EDM Parameters on Kerf Width and Involute Accuracy in Medium Carbon Stell using Grey Fuzzy Analytics and Fuzzy Logic Google Scholar 👨‍🔬 R Yusron, J Jamari, R Hidayat 📚 2021 IEEE 7th Information Technology International Seminar (ITIS), 1-4, 2021	2021
320	Comparative study of estimated draft and righting arm stability for traditional fishing vessel under loading Google Scholar 👨‍🔬 JJAPB S. F. Khristyson 📚 ARPN Journal of Engineering and Applied Sciences 16 (22), 2323-2329, 2021	2021
321	Use of 3D scanner and photogrammetry method for scanning foot deformities: CAD data analysis of morphology and shape of geometry Google Scholar 👨‍🔬 AP Kartini, W., Ikhsan, M., Ismail, R., Jamari, J., Bayuseno 📚 ARPN Journal of Engineering and Applied Sciences 15 (13), 1419-1425, 2020	2020
322	Interaction of inertia and cavitation in textured hydrodynamically lubricated bearing in very low sliding velocity considering slip Google Scholar 👨‍🔬 J Jamari, F Hilmy, M Muchammad, M Tauviqirrahman 📚 Journal of Physics: Conference Series 1517 (1), 012005, 2020	2020
323	A CFD study on the significance of the cavitation modeling in textured bearing analysis Google Scholar 👨‍🔬 J Susilowati, Muchammad, Tauviqirrahman, M. 📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 71 (2 …, 2020	2020
324	Stress analysis of the friction contact on filled styrene butadiene rubber by a blade indentation: a numerical investigation Google Scholar 👨‍🔬 B Setiyana, J Jamari, DJ Schipper 📚 Materials Today: Proceedings 13, 293-298, 2019	2019
325	Simulation load parameter on bipolar artificial hip joint using finite element method (FEM) Google Scholar 👨‍🔬 RAN Al Hakim, A Edwan, J Jamari, R Ismail, A Bayuseno, ... 📚 Materials Today: Proceedings 13, 305-310, 2019	2019
326	Analisis Metode Elemen Hingga Artificial Hip Joint Saat Gerakan Salat Google Scholar 👨‍🔬 A Candratama, Y Prasetyo, J Jamari, R Ismail, I Haryanto 📚 ROTASI 20 (4), 226-230, 2018	2018
327	The effect of supersaturation control strategy for phosphate recovery through precipitation of struvite in an air-agitated column reactor Google Scholar 👨‍🔬 L Edahwati, S Sutiyono, S Muryanto, J Jamari, AP Bayuseno 📚 Rasayan Journal of Chemistry 11 (2), 904-914, 2018	2018
328	A Numerical Investigation of the Friction Contact of an Unfilled Styrene Butadiene Rubber by a Blade Sliding Indentation Google Scholar 👨‍🔬 B Setiyana, M Khafidh, R Ismail, J Jamari, DJ Schipper 📚 Journal of Physics: Conference Series 1090 (1), 012078, 2018	2018
329	Numerical investigation on the elastic modulus of rubber-like materials by a rigid ball indentation technique Google Scholar 👨‍🔬 B Setiyana, J Jamari, M Khafidh 📚 MATEC Web of Conferences 204, 07002, 2018	2018
330	The effect of textured surfaces on the hydrodynamic pressure generation in journal bearings Google Scholar 👨‍🔬 FHJ Muchammad, Mohammad Tauviqirrahman, Rizqy Amanullah Akbar 📚 MATEC Web of Conferences 204, 04006, 2018	2018
331	Morphology and phases composition analysis of mixed calcium carbonate and calcium sulphate precipitates in flowing water of vibrated pipe Google Scholar 👨‍🔬 W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno 📚 International Journal of Mechanical Engineering and Technology 9 (10), 1555-1568, 2018	2018
332	The beneficial effect of hydrophobic coating on the hydrodynamically lubricated bearing performance Google Scholar 👨‍🔬 S Susilowati, M Tauviqirrahman, J Jamari, AP Bayuseno 📚 International Journal of Applied Engineering Research 12 (11), 2969-2972, 2017	2017
333	Effect of calcium additive on the crystallization of struvite Google Scholar 👨‍🔬 DS Perwitasari, L Edahwati, S Sutiyono, N Karaman, J Jamari, ... 📚 MATEC Web of Conferences 58, 01007, 2016	2016
334	Fixation strength analysis of cup to bone material using finite element simulation Google Scholar 👨‍🔬 IB Anwar, E Saputra, R Ismail, J Jamari, E Van Der Heide 📚 AIP Conference Proceedings 1725 (1), 020006, 2016	2016
335	Numerical investigation of pocketed slip slider bearing with non-Newtonian lubricant Google Scholar 👨‍🔬 AW Pratomo, M Muchammad, M Tauviqirrahman, J Jamari, A Bayuseno 📚 Tribology-Materials, Surfaces & Interfaces 10 (2), 64-69, 2016	2016
336	Optimization of the parameters of the manufacturing process of the Product ISO_Diabetes for patients with high risk classes Google Scholar 👨‍🔬 B BAWONO, PW ANGGORO, J Wibowo, J Jamari, AP Bayusena	2016
337	Numerical investigation of the plastic contact deformation between hemispheres: Variation of radii ratio and normal loads Google Scholar 👨‍🔬 R Ismail, T Prasojo, M Tauviqirrahman, J Jamari, DJ Schipper 📚 Advanced Materials Research 1123, 16-19, 2015	2015
338	Analisis Metode Elemen Hingga pada Sendi Panggul Buatan Saat Digunakan untuk Menjalankan Ibadah Salat Google Scholar 👨‍🔬 R Ismail, Y Umardani, IB Anwar, E Saputra, YAA Dhaneswara, A Haris, ...	2015
339	The effect of the wear rate on impingement failure confirming the relation between impingement failure and wear of the acetabular liner surface based on finite element simulation Google Scholar 👨‍🔬 E Saputra, IB Anwar, R Ismail, J Jamari, E Van Der Heide 📚 Proceedings of Malaysian International Tribology Conference 2015, 54-55, 2015	2015
340	Investigasi Efisiensi Propeler Kapal Ikan Tradisional Google Scholar 👨‍🔬 D Mulyana, J Jamari, R Ismail 📚 ROTASI 16 (4), 28-34, 2014	2014
341	Experimental testing of centrifugal pump: small and medium sized enterprise product Google Scholar 👨‍🔬 R Ismail, F Paddiyatu, M Khafidh, S Nugroho, S Sugiyanto, J Jamari 📚 IOP Conference Series: Materials Science and Engineering 58 (1), 012008, 2014	2014
342	PERANCANGAN HUG MACHINE WRAP UNTUK ALAT TERAPI AUTISME Google Scholar 👨‍🔬 SH Suryo, A Raswan, J Jamari, I Haryanto 📚 ROTASI 15 (3), 25-29, 2013	2013
343	Perancangan Mesin Remas (Squeeze Machine) Untuk Terapi Autisme Google Scholar 👨‍🔬 A Raswan, SH Suryo, J Jamari, I Haryanto 📚 ROTASI 15 (3), 1-7, 2013	2013
344	Analisa Running-In Roda Gigi Transmisi Produk Usaha Kecil Menengah Google Scholar 👨‍🔬 T Hidayat, N Supriyana, P Londa, J Jamari, JD Setiawan 📚 Rotasi 15 (2), 12-17, 2013	2013
345	Artificial Slip Surface: Potential Application in Lubricated MEMS Google Scholar 👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper 📚 Tribology-Fundamentals and Advancements, 2013	2013
346	Wear prediction using GIWM (global incremental wear model) method Google Scholar 👨‍🔬 J Jamari 📚 Rotasi 11 (4), 1-4, 2012	2012
347	Prediction of sliding wear of artificial rough surfaces Google Scholar 👨‍🔬 I Syafa’at, B Setiyana, R Ismail, E Saputra, J Jamari, DJ Schipper 📚 Proceedings of International Conference on Chemical and Material Engineering …, 2012	2012
348	Pemanfaatan Mesin Pemanas Induksi Untuk Pengerasan Permukaan Roda Gigi Produk UKM Google Scholar 👨‍🔬 R Ismail, M Tauviqirrahman, SS Sugiyanto, JJ Jamari, A Warsito, A Syakur 📚 Semantik 1 (1), 2011	2011
349	Prediksi Keausan Pin pada Pin-on-Disc Sliding Contact System Menggunakan Metode Elemen Hingga Google Scholar 👨‍🔬 A ZAKARIYA, J JAMARI 📚 Mechanical Engineering Departement of Diponegoro University, 2010	2010
350	Surface topographical change due to sliding contact Google Scholar 👨‍🔬 J Jamari, E Saputra, R Ismail, M Tauviqirrahman, DJ Schipper 📚 National Seminar-Science and Technology, Faculty of Engineering, University …, 2010	2010
351	An Elliptic Elastic-Plastic Asperity Micro-Contact Model Google Scholar 👨‍🔬 J Jamari 📚 ROTASI 8 (3), 1-5, 2006	2006
352	Dimensional Assessment and Error Analysis of 3D CAD Models Manufactured with Bound Metal Deposition. Google Scholar 👨‍🔬 YKP Saleh, R Ismail, J Jamari, IN Jujur, PA Budiantoro, S Ramayanti, ... 📚 International Journal of Engineering & Technology Innovation 16 (1), 1, 2026	2026
353	Finite Element‐Based Wear Prediction Using Archard's Law for Single Mobility Bearing of Total Hip Prosthesis During Walking: A Literature Review Google Scholar 👨‍🔬 MI Ammarullah, AA Yusuf, MI Maula, MDP Lamura, B Setiyana, ... 📚 Engineering Reports 8 (2), e70628, 2026	2026
354	Elastic–plastic contact between two hemispheres: a comparison study of deformable and rigid bases Google Scholar 👨‍🔬 MDP Lamura, HA Ginting, MI Maula, M Ambarita, T Hidayat, AP Bayuseno, ... 📚 Journal of King Saud University–Engineering Sciences 38 (3), 19, 2026	2026
355	Phosphorous recovery from laundry effluents as Struvite and Struvite-K: A batch crystallization study based on a three-factor central composite design Google Scholar 👨‍🔬 DS Perwitasari, WW Schmahl, YM Pusparizkita, J Jamari, AP Bayuseno 📚 Next Materials 11, 101965, 2026	2026
356	Analisis Grid Independence pada Simulasi Finite Element Method Geometri Lumbar 4: Keseimbangan antara Akurasi dan Efisiensi Komputasi Google Scholar 👨‍🔬 HA Wicaksono, MDP Lamura, MI Maula, TI Winarni 📚 ROTASI 27 (1), 52-56, 2025	2025
357	Hydroxyapatite-amorphous calcium phosphate growth on a stainless-steel surface via flame spray deposited hydroxyapatite powders Google Scholar 👨‍🔬 M Amin, YM Pusparizkita, R Ismail, J Jamari, AP Bayuseno 📚 Materials Letters, 139385, 2025	2025
358	Influence of radial clearance on Tresca stress in Al2O2-on-Al2O3 bearings for total hip prosthesis evaluated using finite element analysis Google Scholar 👨‍🔬 MI Ammarullah, AA Yusuf, M Kozin, MI Maula, MDP Lamura, ... 📚 Scientific Reports 15 (1), 33091, 2025	2025
359	Chemical Synthesis of Calcium Phosphates Derived from Crab Shells and Phosphoric Acid: An Examination of Crystal Structure and Biodegradability Features Google Scholar 👨‍🔬 V Naubnome, AM Ernandara, WW Schmahl, YM Pusparizkita, R Ismail, ... 📚 ChemistrySelect 10 (37), e04172, 2025	2025
360	Utilization of biogenic waste as a valuable calcium resource in the hydrothermal synthesis of calcium-orthophosphate nanomaterial Google Scholar 👨‍🔬 AP Bayuseno, R Ismail, J Jamari, S Muryanto 📚 Green and Sustainable Approaches Using Wastes for the Production of …, 2024	2024
361	Additive manufacturing as smart manufacturing system for fabrication of interference screw Google Scholar 👨‍🔬 LPS Hartanti, PW Anggoro, R Ismail, J Jamari, AP Bayuseno 📚 Journal of Advanced Mechanical Design, Systems, and Manufacturing 18 (7 …, 2024	2024
362	Stress Analysis on the Base of Surgeon’s Chair: Frame and Truss Perspective Google Scholar 👨‍🔬 G Santoso, S Sugiharto, T Supriyono, MI Ammarullah, MS Permana, ... 📚 Lecture Notes in Mechanical Engineering 307879, 133-138, 2024	2024
363	Numerical study on mechanical properties of cubic porous bone scaffold: Effect of unit cell type Google Scholar 👨‍🔬 R Winarso, R Ismail, PW Anggoro, J Jamari, AP Bayuseno 📚 AIP Conference Proceedings 3074 (1), 020001, 2024	2024
364	Mild-Carbon Steels As a Storage Tank Material for Biodiesel Product: a Corrosion Assessment Google Scholar 👨‍🔬 VA Fardilah, YM Pusparizkita, M Tauviqirrahman, J Jamari, AP Bayuseno 📚 Rasayan Journal of Chemistry 17 (3), 767-775, 2024	2024
365	REKONSTRUKSI dan SIMULASI ELEMEN HINGGA PADA VERTEBRA LUMBALIS 1 SAMPAI SACRALIS 1 DENGAN KONDISI PEMBEBANAN BERBEDA Google Scholar 👨‍🔬 HCP Setiadi, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 11 (1), 126-131, 2023	2023
366	ANALISIS VON MISES STRESS HIP JOINT PADA INDIVIDU USIA LANJUT MENGGUNAKAN METODE ELEMEN HINGGA Google Scholar 👨‍🔬 M Naufal, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 11 (1), 156-159, 2023	2023
367	Von Mises stress analysis of CoCrMo-on-CoCrMo hip prosthesis based on body mass index: 2D FEM estimation Google Scholar 👨‍🔬 MI Ammarullah, IY Afif, MI Maula, M Tauviqirrahman, AP Bayuseno, ... 📚 2ND INTERNATIONAL CONFERENCE ON ADVANCED INFORMATION SCIENTIFIC DEVELOPMENT …, 2023	2023
368	Inhibition of Barium Sulfat Crystal Formation in a Batch Method Crystallizer in the Presence of Cu and Zn Google Scholar 👨‍🔬 N Karaman, HG Wibowo, U Aqil, J Jamari, AP Bayuseno, L Suprianti 📚 International Journal of Science, Technology & Management 4 (3), 697-701, 2023	2023
369	Effect of 3D printing process parameters on flexural strength of mixing PLA and PCL polymer Google Scholar 👨‍🔬 DP Putra, Romli, AT Prakoso, NY Mahendra, MI Ammarullah, M Yanis, ... 📚 TOWARD ADAPTIVE RESEARCH AND TECHNOLOGY DEVELOPMENT FOR FUTURE LIFE 2689 (1 …, 2023	2023
370	Analisis Pressure Distribution Bed Decubitus Menggunakan Metode Elemen Hingga Google Scholar 👨‍🔬 S Adrianus, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 11 (3), 368-373, 2023	2023
371	Phosphate removal from wastewater for the manufacture of struvite fertilizer. Google Scholar 👨‍🔬 DS Perwitasari, NA Fauziyah, PS Tola, S Muryanto, J Jamari, ... 📚 Technium 16, 2023	2023
372	Design And Prototyping Of Electric Carrying Tractors Google Scholar 👨‍🔬 F Rizayana, W Kwintarini, MR Hermawan, AP Bayuseno, J Jamari 📚 Rotor 16 (2), 26-30, 2023	2023
373	Thermo-hydrodynamic Analysis of Multistep Journal Bearing using Computational Fluid Dynamics Simulation Google Scholar 👨‍🔬 M Muchammad, M Tauviqirrahman, ADD Ega, B Setiyana, J Jamari 📚 CFD Letters 15 (12), 117-134, 2023	2023
374	Hydrothermal Production of Nanoparticles, Thermostable Hydroxyapatite with Varying Ph and Temperatures Google Scholar 👨‍🔬 A Prihanto, S Muryanto, R Ismail, J Jamari, AP Bayuseno 📚 Thermostable Hydroxyapatite with Varying Ph and Temperatures, 2022	2022
375	Computer-aided design for analyzing the influence of anteroposterior translation on artificial knee joint stability Google Scholar 👨‍🔬 D Darmanto, R Novriansyah, R Ismail, J Jamari, AP Bayuseno, ... 📚 Materials today Proceedings, 2022	2022
376	ANALISIS KEKUATAN STRUKTUR RANGKA DASAR SAFETY SURGICAL CHAIR YANG DIGUNAKAN OLEH DOKTER BEDAH LAPAROSKOPI Google Scholar 👨‍🔬 WP Hutagaol, J Jamari, M Tauviqirrahman 📚 Jurnal Teknik Mesin 10 (3), 375-384, 2022	2022
377	A Study of The Effect of Model Geometry and Body Mass Index on The Elastohydrodynamic Lubrication Performance of Metal-on-Metal Hip Joints Google Scholar 👨‍🔬 HB Basri, TSR Doni, ATP Prakoso, MIA Imam, JJ Jamari 📚 Journal of Medical Device Technology 1 (1), 4-9, 2022	2022
378	Evaluation of Extreme Hip Joint Movement after Total Hip Arthroplasty: A Retrospective Study. Open Access Maced J Med Sci. 2021 Oct 31; 9 (B): 1296-1300 Google Scholar 👨‍🔬 IB Anwar, E van der Heide, J Jamari, E Saputra, A Santoso, D Adriansyah, ...	2021
379	Analisis Pengaruh Tekstur Permukaan Berupa Square Dimple Pada Komponen Femoral Head Terhadap Performa Artificial Hip Joint Pada Gerakan Membungkuk Dengan Metode Two-Way Fluid … Google Scholar 👨‍🔬 GA Kalbuadhi, M Tauviqirrahman, J Jamari 📚 Jurnal Teknik Mesin 9 (3), 449-452, 2021	2021
380	Validity of Navier-Stokes Equation in Single-Textured Thrust Bearing Considering Reynolds Number and Cell Aspect Ratio Google Scholar 👨‍🔬 M Muchammad, M Tauviqirrahman, H Nurahman, J Jamari 📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021	2021
381	Analisa Patah Cover Body Sepeda Motor Menggunakan Simulasi Metode Elemen Hingga Google Scholar 👨‍🔬 E Saputra, R Ismail, J Jamari 📚 Jurnal Rekayasa Mesin 16 (2), 265-271, 2021	2021
382	Study on Wear Debris Characterization of Polycarbonate Urethane (PCU) as a Bearing of Artificial Hip Joint Google Scholar 👨‍🔬 WD Lestari, R Ismail, J Jamari, AP Bayuseno 📚 Journal of Physics: Conference Series 2065 (1), 012004, 2021	2021
383	Risk of Impingement on Polyethylene Liner of Total Hip Arthroplasty Prosthesis during Muslim Prayer (Salat) Activity. Open Access Maced J Med Sci. 2020 Jun 10; 8 (F): 65-69 Google Scholar 👨‍🔬 IB Anwar, E Saputra, R Ismail, J Jamari, E van der Heide	2020
384	Effect of Spacing on Flow Field Characteristic of Tube Artificial Reefs with Parallel Formation by CFD Google Scholar 👨‍🔬 JM Mohammad Tauviqirrahman , Sugiyanto , Eflita Yohana , Mulyadi 📚 Journal of Engineering and Applied Sciences 14 (3), 913-919, 2019	2019
385	Improvement of wear resistant of railway wheel by using graphite in various speeds based on disc-on-disc contact system Google Scholar 👨‍🔬 J Junaidi, Joko Suparno, Dimas Halim Ardiansyah, Marwan Effendy 📚 American Institute of Physics 2114 (1), 040005, 2019	2019
386	The Influence of Various Vibration Frequency on Barium Sulfate Scale Formation Of Vibrated Piping System In The Presence Citric Acid Google Scholar 👨‍🔬 N Karaman, W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno 📚 Journal of Physics: Conference Series 953 (1), 012247, 2018	2018
387	A numerical investigation of mechanical response of unfilled styrene butadiene rubber by static straight blade indentation/B. Setiyana...[et al.] Google Scholar 👨‍🔬 S DJ 📚 Journal of Mechanical Engineering (JMechE), 43-51, 2018	2018
388	Initial Response of Human Bone Marrow–Derived Stem Cells after Contact with Ultrahigh-Molecular-Weight Polyethylene (UHMWPE) Material: An: In Vitro: Study on Cell Viability and … Google Scholar 👨‍🔬 IB Anwar, A Santoso, E Saputra, R Ismail, J Jamari, E Van der Heide 📚 Journal of Pharmacy and Bioallied Sciences 10 (1), 43-47, 2018	2018
389	Numerical simulation of artificial hip joint motion based on human age factor Google Scholar 👨‍🔬 S Ramdhani, E Saputra, J Jamari 📚 Journal of Physics: Conference Series 1025 (1), 012093, 2018	2018
390	CFD analysis of partial slip effect on the performance of hydrodynamic lubricated journal bearings Google Scholar 👨‍🔬 WAWJ Muchammad, Bambang Yunianto, Mohammad Tauviqirrahman 📚 MATEC Web of Conferences 204, 04014, 2018	2018
391	Scaling Mitigation of Barium Sulfate in Vibrated Piping Systems Using Ethylene Dyaminetetraacetic Acid Google Scholar 👨‍🔬 N Karaman, W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno 📚 Advanced Science Letters 24 (12), 9726-9728, 2018	2018
392	Modeling and Optimization of Struvite Crystal Scaling Using Experimental Design Methodology For Maleic Acid Google Scholar 👨‍🔬 DS Perwitasari, AP Bayuseno, J Jamari, S Muryanto 📚 International Conference on Science and Technology (ICST 2018), 253-258, 2018	2018
393	Investigation of optimal proses parameters in CNC milling of insole shoe orthotic using taguchi-fuzzy approach Google Scholar 👨‍🔬 B BAWONO, PW ANGGORO, M Tauviqirrahman, J Jamari, AP Bayusena 📚 International Journal of Applied Engineering Research 12 (19), 8723-8726, 2017	2017
394	Pemodelan Metode Elemen Hingga Kontak Femoral Head dengan Acetabular Liner pada Sendi Panggul Buatan dengan Variasi Diameter Celah pada Acetabular Liner Google Scholar 👨‍🔬 R Ismail, S Sugiyanto, H Kristianto, E Saputra, J Jamari 📚 ROTASI 19 (3), 139-146, 2017	2017
395	The effect of load and thickness variation on stress analysis of monocoque frame of electric city car using FEM Google Scholar 👨‍🔬 A Makhrojan, A Suprihadi, SS Budi, J Jamari, R Ismail 📚 AIP Conference Proceedings 1788 (1), 030077, 2017	2017
396	Use of Upflow Fluidized Bed Reactor (FBR) for Recovery Phosphorus from Waste-Water Through Struvite Precipitation Google Scholar 👨‍🔬 L Edahwati, S Muryanto, J Jamari, AP Bayuseno 📚 Advanced Science Letters 23 (12), 12263-12267, 2017	2017
397	Determining Optimal Toolpath Strategy in the Manufacture of Insole Shoe Orthotic Made from Eva Foam Rubber for Diabetes Patients Google Scholar 👨‍🔬 B Bawono, PW Anggoro, AA Anthony, J Jamari, AP Bayuseno 📚 Advanced Science Letters 23 (12), 11902-11909, 2017	2017
398	Comparison of the Effect of Texturing Modes and Boundary Slip on Tribological Performance of Journal Bearing Google Scholar 👨‍🔬 J Mohammad Tauviqirrahman, Bayu Kurniawan, Rifky Ismail, Susilowati 📚 Advanced Science Letters 23 (12), 11918-11921, 2017	2017
399	Autist mobile seat’s frame strength simulation used in a car Google Scholar 👨‍🔬 SH Suryo, J Jamari, GK Naufal, R Ismail, AP Bayuseno, DR Desiningrum 📚 AIP Conference Proceedings 1725 (1), 020086, 2016	2016
400	Finite element modelling of the insole shoe orthotic for foot deformities Google Scholar 👨‍🔬 PW ANGGORO, B BAWONO, PP Permono, J Jamari, AP Bayusena	2016
401	Running-in of an artificial rough rolling-sliding contact using Finite Element Analysis Google Scholar 👨‍🔬 R Ismail, E Saputra, J Jamari, D Schipper 📚 Proceedings of Malaysian International Tribology Conference 2015, 74-75, 2015	2015
402	Effect of geometry on the plastic contact between two hemispheres Google Scholar 👨‍🔬 J Jamari, E Saputra, R Ismail, M Tauviqirrahman, DJ Schipper 📚 Proceedings of Malaysian International Tribology Conference 2015, 76-77, 2015	2015
403	Study on the biocompatibility and wear of stainless steel 316L and UHMWPE materials Google Scholar 👨‍🔬 IB Anwar, E Saputra, R Ismail, J Jamari, E Van der Heide 📚 Proceedings of Malaysian International Tribology Conference 2015, 56-57, 2015	2015
404	Hydrodynamic lubrication of surface textured lubricated contacts with boundary slip using CFD Google Scholar 👨‍🔬 M Tauviqirrahman, AW Muchammad, J Jamari, DJ Schipper 📚 Proceedings of Malaysian International Tribology Conference 2015, 157-158, 2015	2015
405	Investigasi Geometri Dan Performa Hidrodinamis Propeler Produksi Ukm Pada Kondisi Open Water Google Scholar 👨‍🔬 F Firdaus, J Jamari, R Ismail 📚 ROTASI 16 (4), 35-40, 2014	2014
406	Analisa Karakteristik Minyak Pelumas Jenis 15W-40 Produk Dalam Negeri Menggunakan Tribometer Pin-On-Ring Google Scholar 👨‍🔬 M Khafidh, J Jamari 📚 Prosiding Semnastek, 2014	2014
407	Pengaruh Pemodelan Kavitasi untuk Analisis Kontak Terlubrikasi dengan Slip Dinding Google Scholar 👨‍🔬 KR Widodo, M Tauviqirrahman, J Jamari 📚 Semantik 1 (1), 2011	2011
408	Tribology-Based Energy Efficiency Google Scholar 👨‍🔬 D Jamari, R Ismail, M Tauviqirrachman, SS Sugiyanto 📚 Jurnal Tribology, 2011	2011
409	Modeling of Surface Hardening Layer on Transmission Gear Google Scholar 👨‍🔬 J Jamari, R Ismail, M Tauviqirrahman 📚 ICE-SEAM 2011: Proceeding of International Conference and Exhibition …, 2011	2011
410	Analisa Parameter Kontak Pada Sliding Contact Antar Ellipsoid Dengan Variasi Arah Sliding Menggunakan Metode Elemen Hingga Google Scholar 👨‍🔬 AB NUGRAHA, J JAMARI 📚 Mechanical Engineering Departement of Diponegoro University, 2010	2010
411	Pengukuran Deformasi Plastis Pada Kontak Antar Hemisphere Google Scholar 👨‍🔬 BS Hardjuno, JD Setiawan, R Ismail, J Jamari 📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2010	2010
412	Study of rolling contact of a cylinder on a rough surface with finite element analysis Google Scholar 👨‍🔬 R Ismail, M Tauviqirrahman, DJ Schipper 📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2010	2010
413	Elastic-plastic deformation of a rough surface due to repeated rolling contact Google Scholar 👨‍🔬 R Ismail, M Tauviqirrahman, J Jamari, DJ Schipper 📚 5th Kentingan Physics Forum (KPF)-The International Conference on Physics …, 2010	2010
414	The application of updating geometry model in finite element analysis for predicting the running-in wear on sliding contact Google Scholar 👨‍🔬 J Jamari, E Saputra, R Ismail, M Tauviqirrahman, DJ Schipper 📚 8th ASEAN ANSYS Conference 2010, Singapore: Smart Engineering For A …, 2010	2010
415	New Material Development for Surface Layer and Surface Technology in Tribology Science to Improve Energy Efficiency Google Scholar 👨‍🔬 R Ismail, M Tauviqirrahman, Jamari, DJ Schipper 📚 AIP Conference Proceedings 1169 (1), 214-221, 2009	2009
416	Closure to “Discussion of ‘Experimental Investigation of Fully Plastic Contact of a Sphere Against a Hard Flat’”(2007, ASME J. Tribol., 129, p. 700) Google Scholar 👨‍🔬 J Jamari, DJ Schipper	2007
417	Matching and stitching for surface identification Google Scholar 👨‍🔬 J Jamari 📚 ROTASI 8 (4), 1-4, 2006	2006
418	Rancang Bangun Alat Uji Running-In Untuk Sistem Kontak Two-Disc Google Scholar 👨‍🔬 P Londa, T Hidayat, N Supriyana, J Jamari, S Nugroho 📚 ROTASI 15 (2), 24-30, 0
419	Computational prediction of running-in wear in hard-on-hard dual mobility total hip prostheses during the gait cycle Google Scholar 👨‍🔬 MI Ammarullah, Y Lim, M Kozin, MDP Lamura, B Setiyana, ... 📚 Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2026	2026
420	Sound absorption as a basis for noise reduction studies: Bibliometric analysis Google Scholar 👨‍🔬 TB Atmojo, MA Budiharjo, J Jamari, S Rachmawati, S Rinawati, ... 📚 AIMS Environmental Science 13 (1), 23-38, 2026	2026
421	Corrosion resistance of stainless steel in fuel ballast systems exposed to a mixture of biodiesel and artificial seawater Google Scholar 👨‍🔬 YM Pusparizkita, VA Fardilah, A Harimawan, C Aslan, J Jamari, ... 📚 Next Research, 101359, 2026	2026
422	Von Mises stress analyses using finite element model in two patients with chronic low back pain. Google Scholar 👨‍🔬 AIP Prasetya, TI Winarni, J Jamari, A Syahrom 📚 Medicinski Glasnik 23 (1), 173, 2026	2026
423	Numerical investigation of fluid pressure on elastic-plastic contact between a hemisphere and a rigid flat surface Google Scholar 👨‍🔬 J Jamari, MDP Lamura, AWB Santosa, MI Ammarullah, AP Bayuseno 📚 Mechanics Research Communications, 104663, 2026	2026
424	Soxhlet extraction of Indonesian carbonate asphalt as a sustainable source for bitumen and precipitated calcium carbonate feedstock Google Scholar 👨‍🔬 M Ambarita, E Fernando, K Panjaitan, CFG Jawak, WW Schmahl, ... 📚 Progress in Engineering Science 3 (1), 100202, 2026	2026
425	Novel Advances and Approaches in Hydroxyapatite-Based Coating on Metallic Biomaterials Google Scholar 👨‍🔬 M Amin, YM Pusparizkita, WW Schmahl, R Ismail, J Jamari, AP Bayuseno 📚 Journal of Alloys and Compounds Communications, 100187, 2026	2026
426	Carbonizing solid waste generated from the extraction of Indonesian carbonate asphalt to produce precipitated calcium carbonate filler for use in polymer composites Google Scholar 👨‍🔬 M Ambarita, F Adam, YK Sinaga, YM Pusparizkita, WW Schmahl, R Ismail, ... 📚 Next Sustainability 7, 100346, 2026	2026
427	An experimental and 2D axisymmetric simulation approach for analysing the impact resistance of Zn-ZnO-CaCO₃ coating on AISI 1010 steel Google Scholar 👨‍🔬 NS Dera, YM Pusparizkita, SMP Hidayat, VA Fardilah, MDP Lamura, ... 📚 Next Materials 12, 102224, 2026	2026
428	Microwave-assisted synthesis of calcium phosphate powders from thermally treated green mussel shells and solutions containing HPO₄³⁻ Google Scholar 👨‍🔬 YM Pusparizkita, A Prihanto, WW Schmahl, RA Faizal, R Ismail, J Jamari, ... 📚 Next Materials 12, 102503, 2026	2026
429	Analisis Perbandingan Kontak Mekanik pada Permukaan Sinusoidal dengan Variasi Kondisi Pelumasan Menggunakan Metode Elemen Hingga Google Scholar 👨‍🔬 S Anwar, MDP Lamura, J Jamari, AP Bayuseno 📚 ROTASI 27 (1), 1-7, 2025	2025
430	Understanding Hip Contact Stress Based on Types of Physical Activity: A Systematic Review Google Scholar 👨‍🔬 AIP Prasetya, MI Ammarullah, TI Winarni, A Pramono, J Jamari, T Kamarul, ... 📚 Health Science Reports 8 (1), e70305, 2025	2025
431	AGRICULTURAL EQUIPMENT FOR FARMING ON TERRACE, NARROWING, AND HARD-TO-REACH LAND: A REVIEW Google Scholar 👨‍🔬 F Rizayana, R Hermawan, S Sugiharto, J Jamari, AP Bayuseno 📚 ARPN Journal of Engineering and Applied Sciences 20 (17), 1489-1500, 2025	2025
432	A Scientometric Analysis on the Relevance of Sound Insulation Literature as a Knowledge Base in Noise Control Google Scholar 👨‍🔬 TB Atmojo, MA Budiharjo, J Jamari, CH Wibowo, FM Majid 📚 E3S Web of Conferences 674, 03002, 2025	2025
433	PENGARUH VARIASI TEKANAN TERHADAP PENYEMPITAN PEMBULUH DARAH DAN IMPLIKASINYA PADA PEMBENTUKAN ULKUS DEKUBITUS Google Scholar 👨‍🔬 BP Mahardika, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 13 (1), 15-22, 2025	2025
434	The effect of height variations sinusoidal against rigid flat on contact mechanics Google Scholar 👨‍🔬 S Anwar, MDP Lamura, AP Bayuseno, J Jamari 📚 Industrial Lubrication and Tribology, 2025	2025
435	Assisted hydrothermal synthesis of green mussel shell-derived hydroxyapatite for use in filler polymer-based composites Google Scholar 👨‍🔬 V Naubnome, AP Bayuseno, FA Wicaksono, A Prihanto, VA Fardilah, ... 📚 Journal of Physics: Conference Series 2972 (1), 012053, 2025	2025
436	Optimization of the Additive Manufacturing Parameters of Polylactic Google Scholar 👨‍🔬 LPS Hartanti, B Bawono, T Yuniarto, J Mulyono, JJ Nauolim, R Ismail, ... 📚 Proceedings of 8th ASRES International Conference on Intelligent …, 2025	2025
437	ANALISIS DISTRIBUSI TEKANAN PADA KULIT PASIEN TERBARING PADA KASUR UDARA DENGAN PENAMBAHAN LAPISAN LAYER UNTUK PENCEGAHAN ULKUS DEKUBITUS MENGGUNAKAN METODE ELEMEN HINGGA Google Scholar 👨‍🔬 RA Landarto, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 13 (2), 1-6, 2025	2025
438	ANALISIS VON MISES STRESS PADA TULANG L1 HINGGA L2 DENGAN KONDISI PEMBEBANAN MULTIAXIAL MENGGUNAKAN METODE ELEMEN HINGGA Google Scholar 👨‍🔬 M Rafli, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 13 (2), 47-50, 2025	2025
439	Stress distribution on the L1/L2 endplates under multiaxial loads: A finite element study Google Scholar 👨‍🔬 HA Wicaksono, M Rafli, M Bilal, MDP Lamura, MI Maula, AP Bayuseno, ... 📚 Mechanical Engineering for Society and Industry 5 (1), 182-189, 2025	2025
440	PRODUKSI PRECIPITATED CALCIUM CARBONATE (PCC) MORFOLOGI KALSIT DARI LIMBAH ASBUTON MENGGUNAKAN PELARUT ASAM ASETAT (CH3COOH) DAN AMONIUM BIKARBONAT (NH4HCO3) MELALUI METODE … Google Scholar 👨‍🔬 C Ginting, AP Bayuseno, J Jamari 📚 JURNAL TEKNIK MESIN 13 (3), 35-40, 2025	2025
441	ANALISIS VON MISES STRESS PADA TULANG L4 HINGGA L5 DENGAN MENGGUNAKAN METODE ELEMEN HINGGA Google Scholar 👨‍🔬 D Bungaran, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 13 (3), 71-74, 2025	2025
442	ANALISIS PENGARUH LAPISAN SELULOSA PADA MODEL KASUR ANGIN ANTI DEKUBITUS TERHADAP DISTRIBUSI TEKANAN TUBUH BERBARING MENGGUNAKAN METODE ELEMEN HINGGA Google Scholar 👨‍🔬 M Rizqy, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 13 (3), 85-90, 2025	2025
443	ANALISIS DISTRIBUSI TEGANGAN VON MISES PADA VERTEBRA LUMBALIS 4 HINGGA SACRALIS 1 TERHADAP VARIASI SUDUT FLEKSI DENGAN METODE NUMERIK Google Scholar 👨‍🔬 K Febriyanto, O Kurdi, J Jamari 📚 JURNAL TEKNIK MESIN 13 (3), 81-84, 2025	2025
444	OPTIMALISASI EKSTRAKSI ASPAL BUTON MENGGUNAKAN METODE SOXHLET DENGAN PENGARUH PELARUT N-HEXANE, TRICHLORETHYLENE DAN TOLUENE SEBAGAI PEMANFAATAN PEMBUATAN PRECIPITATED CALCIUM … Google Scholar 👨‍🔬 E Fernando, AP Bayuseno, J Jamari 📚 JURNAL TEKNIK MESIN 13 (3), 105-108, 2025	2025
445	OPTIMALISASI DESAIN MATRAS UNTUK REDUKSI RISIKO PRESSURE ULCERS MELALUI PERBANDINGAN DISTRIBUSI TEKANAN ANTARA MATRAS BERPROFIL DIAMOND DAN MATRAS MEDIS KONVENSIONAL … Google Scholar 👨‍🔬 S Wijaya, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 13 (3), 231-236, 2025	2025
446	ANALISIS PENGARUH GAP GEOMETRI BALOK PADA DESAIN SURFACE KASUR FOAM ANTI DECUBITUS TERHADAP DISTRIBUSI TEGANGAN VON MISES MENGGUNAKAN METODE ELEMEN HINGGA Google Scholar 👨‍🔬 HA Hasim, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 13 (3), 285-290, 2025	2025
447	ANALISIS PENGARUH PENAMBAHAN PRECIPITATED CALCIUM CARBONATE (PCC) HASIL EKSTRAKSI ASPAL BUTON DAN ZINC SEBAGAI MATERIAL PELAPIS SPESIMEN LOW-CARBON STEEL AISI 1018 PADA TANGKI … Google Scholar 👨‍🔬 K Panjaitan, AP Bayuseno, J Jamari 📚 JURNAL TEKNIK MESIN 13 (3), 445-452, 2025	2025
448	OPTIMASI KETEBALAN COATING ZN-ZNO-CACO₃ PADA BAJA AISI 1010 TERHADAP KETAHANAN IMPAK DENGAN PENDEKATAN EKSPERIMENTAL DAN SIMULASI 2D AXISYMMETRIC Google Scholar 👨‍🔬 SMP Hidayat, AP Bayuseno, J Jamari 📚 JURNAL TEKNIK MESIN 13 (3), 389-390, 2025	2025
449	ANALISIS BIOMEKANIKA MATA MENGGUNAKAN METODE ELEMEN HINGGA PENGARUH VARIASI INDEKS MASSA TUBUH DAN KEKAKUAN LENSA TERHADAP TEKANAN INTRAOKULAR Google Scholar 👨‍🔬 TS Budiono, J Jamari, TI Winarni, MDP Lamura 📚 JURNAL TEKNIK MESIN 13 (3), 437-444, 2025	2025
450	Prototype and macroscopic examination of implant dental crown made by 3-axis CNC machine Google Scholar 👨‍🔬 Kriswanto, N Faozi, J Jamari, AP Bayuseno, W Sumbodo, K Huda 📚 AIP Conference Proceedings 3354 (1), 030008, 2025	2025
451	Study on the Effect of Laser Cleaning Power and Scanning Frequency on Surface Properties and Coating Adhesion of ASTM A36 Steel. Google Scholar 👨‍🔬 ES Hadi, A Fidaus, U Budiarto, MR Caesar Putra Hadi, M Tauviqirrahman, ... 📚 Tribology in Industry 47 (4), 732, 2025	2025
452	Effect of Micro-Separations and Cup Inclination Angles influencing Contact Mechanics of PCD-PCD for Hip Resurfacing using Elevated Acetubular Cup Rim Design for Various Gait Loads Google Scholar 👨‍🔬 R Nithyaprakash, V Naveen, SS Kumar, SS Mahendran, KK Maruthu, ... 📚 PMRP Journal of Research–Part A: Computational Engineering, 2025	2025
453	KARAKTERISASI PELAPISAN ELEKTRODEPOSISI ZN-ZNO DAN CACO3 KOMPOSIT PADA BAJA AISI 1010 Google Scholar 👨‍🔬 KH Pamungkas, AP Bayuseno, J Jamari 📚 JURNAL TEKNIK MESIN 13 (3), 277-284, 2025	2025
454	Finite Element Analysis of SS316L Mandibular Implant Fabricated Using Metal Fused Filament Fabrication Google Scholar 👨‍🔬 YKP Saleh, R Ismail, J Jamari, IN Jujur 📚 2025 IEEE International Biomedical Instrumentation and Technology Conference …, 2025	2025
455	A new approach of response surface-based goal programming model for additive manufacturing optimization in the biomedical field Google Scholar 👨‍🔬 LPS Hartanti, R Ismail, J Jamari, AP Bayuseno 📚 Cogent Engineering 12 (1), 2524445, 2025	2025
456	Porous Structures Simulation Analysis: The Effect of Different Strut Geometry on the Bone Scaffold Google Scholar 👨‍🔬 R Winarso, R Ismail, PW Anggoro, J Jamari, AP Bayuseno 📚 Lecture Notes in Mechanical Engineering 307879, 103-112, 2024	2024
457	The Posterior Tibial Slope Effect to Gap Difference on a Single Radius System for Total Knee Arthroplasty Based on the Computer-Aided Design Approach Google Scholar 👨‍🔬 D Darmanto, R Novriansyah, R Ismail, J Jamari, AP Bayuseno, ... 📚 Lecture Notes in Mechanical Engineering 307879, 1-11, 2024	2024
458	Analysis of Distinct Substrate Pre-treatment Effects on Flame-Sprayed Hydroxyapatite Coating Google Scholar 👨‍🔬 RB Taqriban, PS Ramadhan, J Jamari, R Ismail, AP Bayuseno 📚 Lecture Notes in Mechanical Engineering 307879, 593-602, 2024	2024
459	ANALISIS VON MISES STRESS PADA BIOMATERIAL PENGGANTI DISKUS INTERVERTEBRALIS MENGGUNAKAN METODE ELEMEN HINGGA Google Scholar 👨‍🔬 SY Sinarpaska, S Nugroho, J Jamari 📚 JURNAL TEKNIK MESIN 12 (2), 83-88, 2024	2024
460	STUDI PENDAHULUAN REKONSTRUKSI DAN MESH TULANG LUMBAR 1 SAMPAI 2 MENGGUNAKAN METODE FINITE ELEMENT Google Scholar 👨‍🔬 IN Arif, S Nugroho, J Jamari 📚 JURNAL TEKNIK MESIN 12 (2), 103-106, 2024	2024
461	Contact Pressure Analysis of Dual Mobility Cup for Asians on Various Google Scholar 👨‍🔬 T Hidayat, R Ismail, M Tauviqirrahman, E Saputra, MDP Lamura, ... 📚 Proceedings of the 9th International Conference and Exhibition on …, 2024	2024
462	Development of CaCO3 novel morphology through crystal lattice modification assisted by sulfate incorporation and vibration Google Scholar 👨‍🔬 W Mangestiyono, J Jamari, AP Bayuseno, S Muryanto 📚 Communications in Science and Technology 9 (1), 192-198, 2024	2024
463	ANALISIS PENGARUH GEOMETRI MODEL PADA MEKANIKA KONTAK ASPERITAS BENTUK SINUSOIDAL MENGGUNAKAN METODE ELEMEN HINGGA Google Scholar 👨‍🔬 MN Afi, S Nugroho, J Jamari 📚 JURNAL TEKNIK MESIN 12 (3), 63-67, 2024	2024
464	ANALISIS VON MISES STRESS PADA TULANG CANCELLOUS LUMBALIS 1 SAMPAI LUMBALIS 2 DENGAN KONDISI PEMBEBANAN BERBEDA MENGGUNAKAN ELEMEN HINGGA Google Scholar 👨‍🔬 AM Pahlevi, B Setiyana, J Jamari 📚 JURNAL TEKNIK MESIN 12 (3), 353-358, 2024	2024
465	REKONSTRUKSI DISKUS INTERVERTEBRALIS LUMBALIS 1 DAN LUMBALIS 2 MENGGUNAKAN APLIKASI SOLIDWORKS Google Scholar 👨‍🔬 RFB Wahyudi, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 12 (3), 226-229, 2024	2024
466	REKONSTRUKSI DAN ANALISIS TEGANGAN VON MISES PADA VERTEBRA LUMBALIS 4 HINGGA SACRALIS 1 TERHADAP VARIASI INDEKS MASSA TUBUH Google Scholar 👨‍🔬 LJ Rama, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 12 (3), 25-28, 2024	2024
467	STUDI PENDAHULUAN DALAM OPTIMALISASI REKONSTRUKSI DAN ANALISIS MEKANIKA KONTAK LUMBAR SPINE (L1-L2) Google Scholar 👨‍🔬 M Bilal, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 12 (3), 29-34, 2024	2024
468	Simulation of Torque, Tip Speed Ratio, Power, and Power Coefficient of 1 MW Horizontal Axis Wind Turbine in Modified NACA 4412-2412 Variation of Airfoil Blades Google Scholar 👨‍🔬 MM Munir, DH Al-Janan, S Anis, RF Naryanto, A Hangga, W Sumbodo, ... 📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 120 (2 …, 2024	2024
469	ANALISIS GEOMETRI FEMORAL HEAD TERHADAP TEKANAN KONTAK PCD-PCD HIP JOINT PROSTHESIS Google Scholar 👨‍🔬 SA Shiddiq, J Jamari, AP Bayuseno, MI Ammarullah 📚 JURNAL TEKNIK MESIN 12 (4), 63-68, 2024	2024
470	PERILAKU MULUR (CREEP) POLIPROPILEN DENGAN PERUBAHAN TEGANGAN DAN TEMPERATUR Google Scholar 👨‍🔬 M Iman, AP Bayuseno, J Jamari 📚 PROSIDING, 2023	2023
471	Control Design of Automatic Inflatable Vest for Deep Pressure Therapy Google Scholar 👨‍🔬 F Husaini, M Maula, M Ammarullah, I Afif, MD Lamura, TI Winarni, ... 📚 ROTASI 26 (1), 28-34, 2023	2023
472	REKONSTRUKSI DAN PENGUKURAN PARAMETER ATROPOMETRI TULANG VERTEBRA LUMBALIS 1 HINGGA SACRALIS 1 Google Scholar 👨‍🔬 D Paramartha, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 11 (1), 132-135, 2023	2023
473	ANALISIS SISTEM KONTAK GIGI MANUSIA DENGAN KONDISI OVERBITE DENGAN METODE ELEMEN HINGGA Google Scholar 👨‍🔬 TE Gloriarista, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 11 (1), 166-169, 2023	2023
474	STUDI DAN PEMODELAN KONTAK ASPERITIES ELASTIK-PLASTIK MENGGUNAKAN METODE ELEMEN HINGGA Google Scholar 👨‍🔬 HA Ginting, J Jamari, AP Bayuseno 📚 JURNAL TEKNIK MESIN 11 (2), 139-144, 2023	2023
475	Comparative analysis of the effects of surface texture and boundary slip on the tribological properties of lubricated sliding contacts Google Scholar 👨‍🔬 M Tauviqirrahman, A Greggy, Muchammad, Jamari, B Setyana, ... 📚 3rd Borobudur International Symposium on Science and Technology 2021 2706 (1 …, 2023	2023
476	3-D hydrodynamic analysis of artificial slip effects on micro textured thrust bearing to improve the hydrodynamic lubrication performance Google Scholar 👨‍🔬 Muchammad, BFT Kiono, M Tauviqirrahman, K Agustan, B Setiyana, ... 📚 3rd Borobudur International Symposium on Science and Technology 2021 2706 (1 …, 2023	2023
477	Contact pressure on CoCrMo-on-CoCrMo bearing of total hip arthroplasty under normal walking condition using 2D finite element approach Google Scholar 👨‍🔬 MI Ammarullah, IY Afif, MI Mula, TI Winarni, M Tauviqirrahman, ... 📚 THE 6TH INTERNATIONAL CONFERENCE ON ENERGY, ENVIRONMENT, EPIDEMIOLOGY AND …, 2023	2023
478	The effect of sliding velocity on friction of rubber in contact with a rigid spherical counter surface: A numerical investigation Google Scholar 👨‍🔬 B Setiyana, J Jamari, R Ismail, DJ Schipper 📚 PROCEEDINGS OF 2ND INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY (I-CoRE 2021 …, 2023	2023
479	Von Mises stress evaluation of CoCrMo-on-CoCrMo bearing in total hip replacement during normal walking using 2D finite element strategy Google Scholar 👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, ... 📚 TOWARD ADAPTIVE RESEARCH AND TECHNOLOGY DEVELOPMENT FOR FUTURE LIFE 2689 (1 …, 2023	2023
480	PENGARUH DEEP PRESSURE TERHADAP KONDUKTANSI KULIT ANAK SEKOLAH DASAR DENGAN MENGGUNAKAN SENSOR FISOLOGIS GALVANIC SKIN RESPONSE Google Scholar 👨‍🔬 R Pramuditya, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 11 (3), 360-363, 2023	2023
481	PENGARUH DEEP PRESSURE VEST TERHADAP PENURUNAN STRES KOGNITIF MENGGUNAKAN ELECTROENCEPHALOGRAM (EEG) PADA ANAK SKOLAH DASAR Google Scholar 👨‍🔬 AI Mursyd, J Jamari, TI Winarni 📚 JURNAL TEKNIK MESIN 11 (3), 364-367, 2023	2023
482	Machine Learning Methods for Identification Osteoarthritis: A Bibliometric Analysis and General Review Google Scholar 👨‍🔬 F Muttaqin, I Yuniar Purbasari, A Priharyoto Bayuseno, T Indah Winarni, ... 📚 E3S Web of Conferences 448, 02009, 2023	2023
483	Contact Pressure Analysis of Dual Mobility Cup for Asians on Various Head-To-Liner Ratios Google Scholar 👨‍🔬 T Hidayat, R Ismail, M Tauviqirrahman, E Saputra, MDP Lamura, ... 📚 International Conference and Exhibition on Sustainable Energy and Advanced …, 2023	2023
484	Understanding Hip Contact Stress Based on Hip Morphometry and Types of Physical Activity: A Systematic Review Google Scholar 👨‍🔬 A Indra, TI Winarni, A Pramono, J Jamari, T Kamarul, A Syahrom	2023
485	Effect of withdrawal speed variations on coating quality of electrophoretically deposited biogenic hydroxyapatite on AISI 316L Google Scholar 👨‍🔬 RB Taqriban, J Jamari, R Ismail, AP Bayuseno 📚 IOP Conference Series: Earth and Environmental Science 1268 (1), 012068, 2023	2023
486	Optimization of the Additive Manufacturing Parameters of Polylactic Acid Interference Screw on Dimensional Accuracy Google Scholar 👨‍🔬 LPS Hartanti, B Bawono, T Yuniarto, J Mulyono, JJ Nauolim, R Ismail, ... 📚 International Conference on Intelligent Technologies, 327-336, 2023	2023
487	Analysis of an Axial Permanent Magnetic Bearing for 1MW Horizontal Axis Wind Turbine Google Scholar 👨‍🔬 RF Naryanto, R Prasdiansyah, DH Al-Janan, W Aryadi, A Roziqin, S Anis, ... 📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 94 (1 …, 2022	2022
488	Chairless Chairs for Orthopedic Surgery Purpose–A Literature Review. Open Access Maced J Med Sci. 2022 Feb 07; 10 (F): 146-152 Google Scholar 👨‍🔬 G Santoso, S Sugiharto, A Mughni, MI Ammarullah, AP Bayuseno, ...	2022
489	of Metal-on-Metal Total Hip Implant with Different Materials Subjected to Gait Loading. Metals 2022, 12, 1241 Google Scholar 👨‍🔬 J Jamari, MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, ... 📚 s Note: MDPI stays neutral with regard to jurisdictional claims in published …, 2022	2022
490	Optimisation of cutting parameters of new material orthotic insole using a Taguchi and response surface methodology approach Google Scholar 👨‍🔬 PW Anggoro, Y Purharyono, AA Anthony, M Tauviqirrahman, ... 📚 Alexandria Engineering Journal, 2022	2022
491	EVALUASI UKURAN FEMORAL HEAD PADA BANTALAN CERAMIC-ON-CERAMIC HIP JOINT PROSTHESIS Google Scholar 👨‍🔬 A Nugroho, J Jamari, AP Bayuseno, MI Ammarullah 📚 JURNAL TEKNIK MESIN 10 (1), 7-12, 2022	2022
492	ELECTROPHORETIC DEPOSITION OF Ti6Al4V HYDROXYAPATITE COATING: ELECTRODE DISTANCE AND OPERATING TIME CHANGES Google Scholar 👨‍🔬 RB Taqriban, R Ismail, J Jamari, AP Bayuseno 📚 ARPN Journal of Engineering and Applied Sciences 17 (15), 1474-1479, 2022	2022
493	Reverse engineering (RE) for designing insole shoe orthotics leading an accurate dimensional size for patients with a deformed foot Google Scholar 👨‍🔬 AP Anggoro, P.W., Wicaksono, A., Jamari, J., Bayuseno 📚 ARPN Journal of Engineering and Applied Sciences 16 (2), 142-150, 2021	2021
494	Morphology of barite precipitated from induced flow vibration and the presence of chemical additives Google Scholar 👨‍🔬 AP Karaman, N., Mangestiyono, W., Muryanto, S., Jamari, J., Bayuseno 📚 Rasayan Journal of Chemistry 14 (1), 466-472, 2021	2021
495	Effect of the Optimized Temperature and pH Solution on the Crystallization of Struvite Google Scholar 👨‍🔬 DS Perwitasari, SS Santi, AP Bayuseno, J Jamari, S Muryanto 📚 IOP Conference Series: Materials Science and Engineering 1125 (1), 012091, 2021	2021
496	Study of Wear on the Metal on Polycarbonate Urethane (PCU) Contact in Total Hip Arthroplasty Using Finite Element Method Google Scholar 👨‍🔬 WD Lestari, L Edahwati, N Adyono, R Ismail, J Jamari, AP Bayuseno 📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021	2021
497	Analysis of Lubrication Performance of Thrust Bearing with Texture Height Variation and Cavitation Modelling with CFD Simulation Google Scholar 👨‍🔬 M Muchammad, M Tauviqirrahman, H Nurahman, J Jamari 📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021	2021
498	Effect of Rubber Deformation Along Sliding Contact on Its Stress and Friction Force: A Numerical Investigation Google Scholar 👨‍🔬 B Setiyana, R Ismail, J Jamari 📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021	2021
499	Sendi panggul buatan bipolar untuk memudahkan gerakan salat pasien (Bipolar artificial hip joint for patient performing salat) Google Scholar 👨‍🔬 J Jamari, E Saputra, IB Anwar 📚 Eko Saputra, 105, 2021	2021
500	Conference Paper G Google Scholar 👨‍🔬 J Jamari, E Saputra 📚 Eko Saputra, 2021	2021

1

Tresca stress simulation of metal-on-metal total hip arthroplasty during normal walking activity

Google Scholar

👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, I Akbar, ...

📚 Materials 14 (24), 7554, 2021

2021

2

The effect of bottom profile dimples on the femoral head on wear in metal-on-metal total hip arthroplasty

Google Scholar

👨‍🔬 J Jamari, MI Ammarullah, APM Saad, A Syahrom, M Uddin, ...

📚 Journal of functional biomaterials 12 (2), 38, 2021

2021

3

Minimizing risk of failure from ceramic-on-ceramic total hip prosthesis by selecting ceramic materials based on tresca stress

Google Scholar

👨‍🔬 MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, DB Wibowo, ...

📚 Sustainability 14 (20), 13413, 2022

2022

4

Computational contact pressure prediction of CoCrMo, SS 316L and Ti6Al4V femoral head against UHMWPE acetabular cup under gait cycle

Google Scholar

👨‍🔬 J Jamari, MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, ...

📚 Journal of functional biomaterials 13 (2), 64, 2022

2022

5

An elastic–plastic contact model of ellipsoid bodies

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 Tribology letters 21 (3), 262-271, 2006

2006

6

In silico contact pressure of metal-on-metal total hip implant with different materials subjected to gait loading

Google Scholar

👨‍🔬 J Jamari, MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, ...

📚 Metals 12 (8), 1241, 2022

2022

7

Tresca stress study of CoCrMo-on-CoCrMo bearings based on body mass index using 2D computational model

Google Scholar

👨‍🔬 MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, O Kurdi, ...

📚 J. Tribol 33, 31-38, 2022

2022

8

Experimental investigation of fully plastic contact of a sphere against a hard flat

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

2006

9

Adopted walking condition for computational simulation approach on bearing of hip joint prosthesis: Review over the past 30 years

Google Scholar

👨‍🔬 J Jamari, MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, ...

📚 Heliyon 8 (12), 2022

2022

10

Analysis of contact pressure in a 3D model of dual-mobility hip joint prosthesis under a gait cycle

Google Scholar

👨‍🔬 M Tauviqirrahman, MI Ammarullah, J Jamari, E Saputra, TI Winarni, ...

📚 Scientific reports 13 (1), 3564, 2023

2023

11

A study of surface texturing and boundary slip on improving the load support of lubricated parallel sliding contacts

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 Acta mechanica 224 (2), 365-381, 2013

2013

12

The potential use of green mussel (Perna Viridis) shells for synthetic calcium carbonate polymorphs in biomaterials

Google Scholar

👨‍🔬 R Ismail, DF Fitriyana, YI Santosa, S Nugroho, AJ Hakim, MS Al Mulqi, ...

📚 Journal of Crystal Growth 572, 126282, 2021

2021

13

Computer-aided reverse engineering system in the design and production of orthotic insole shoes for patients with diabetes

Google Scholar

👨‍🔬 PW Anggoro, M Tauviqirrahman, J Jamari, AP Bayuseno, B Bawono, ...

📚 Cogent Engineering 5 (1), 1470916, 2018

2018

14

Performance comparison of Newtonian and non-Newtonian fluid on a heterogeneous slip/No-slip journal bearing system based on CFD-FSI method

Google Scholar

👨‍🔬 M Tauviqirrahman, J Jamari, S Susilowati, C Pujiastuti, B Setiyana, ...

📚 Fluids 7 (7), 225, 2022

2022

15

Physiological effect of deep pressure in reducing anxiety of children with ASD during traveling: A public transportation setting

Google Scholar

👨‍🔬 IY Afif, AR Manik, K Munthe, MI Maula, MI Ammarullah, J Jamari, ...

📚 Bioengineering 9 (4), 157, 2022

2022

16

Kinetics and morphology analysis of struvite precipitated from aqueous solution under the influence of heavy metals: Cu2+, Pb2+, Zn2+

Google Scholar

👨‍🔬 DS Perwitasari, S Muryanto, J Jamari, AP Bayuseno

📚 Journal of environmental chemical engineering 6 (1), 37-43, 2018

2018

17

Combined effect of texturing and boundary slippage in lubricated sliding contacts

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 Tribology international 66, 274-281, 2013

2013

18

Effect of short-term deep-pressure portable seat on behavioral and biological stress in children with autism spectrum disorders: A pilot study

Google Scholar

👨‍🔬 IY Afif, M Farkhan, O Kurdi, MI Maula, MI Ammarullah, B Setiyana, ...

📚 Bioengineering 9 (2), 48, 2022

2022

19

Advanced design and manufacturing of custom orthotics insoles based on hybrid Taguchi-response surface method

Google Scholar

👨‍🔬 PW Anggoro, B Bawono, J Jamari, M Tauviqirrahman, AP Bayuseno

📚 Heliyon 7 (3), 2021

2021

20

Deformation due to contact between a rough surface and a smooth ball

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 Wear 262 (1-2), 138-145, 2007

2007

21

Running-in of rolling contacts

Google Scholar

👨‍🔬 J Jamari

📚 Enschede, The Netherlands: PhD Thesis, 2006

2006

22

Finite element analysis of artificial hip joint movement during human activities

Google Scholar

👨‍🔬 E Saputra, IB Anwar, J Jamari, E Van Der Heide

📚 Procedia engineering 68, 102-108, 2013

2013

23

Plastic deterministic contact of rough surfaces

Google Scholar

👨‍🔬 J Jamari, MB de Rooij, DJ Schipper

2007

24

Deterministic repeated contact of rough surfaces

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 Wear 264 (3-4), 349-358, 2008

2008

25

Relationship between deformation and running-in wear on hard-on-hard bearings from metal, ceramic, and diamond materials for total hip prosthesis

Google Scholar

👨‍🔬 MI Ammarullah, T Hidayat, MDP Lamura, J Jamari

📚 Jurnal Tribologi 38, 69-81, 2023

2023

26

Plastic deformation and contact area of an elastic–plastic contact of ellipsoid bodies after unloading

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 Tribology International 40 (8), 1311-1318, 2007

2007

27

Tresca stress evaluation of Metal-on-UHMWPE total hip arthroplasty during peak loading from normal walking activity

Google Scholar

👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, J Jamari

📚 Materials Today: Proceedings 63, S143-S146, 2022

2022

28

A 3-dimensional finite element analysis of the insole shoe orthotic for foot deformities

Google Scholar

👨‍🔬 PW ANGGORO, E Saputra, M Tauviqirrahman, J Jamari, AP Bayusena

📚 International Journal of Applied Engineering Research 12 (15), 5254-5460, 2017

2017

29

An analytical approach on the tribological behaviour of pocketed slider bearings with boundary slip including cavitation

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, J Jamari, DJ Schipper

📚 Lubrication science 29 (3), 133-152, 2017

2017

30

Numerical study of the load-carrying capacity of lubricated parallel sliding textured surfaces including wall slip

Google Scholar

👨‍🔬 DJ Tauviqirrahman, M., Muchammad, Jamari, J., Schipper

📚 Tribology Transactions 57 (1), 134-145, 2013

2013

31

The effect of repeated impingement on UHMWPE material in artificial hip joint during salat activities

Google Scholar

👨‍🔬 J Jamari, R Ismail, E Saputra, S Sugiyanto, IB Anwar

📚 Advanced Materials Research 896, 272-275, 2014

2014

32

Study of contact mechanics between two brass solids in various diameter ratios and friction coefficient

Google Scholar

👨‍🔬 MDP Lamura, T Hidayat, MI Ammarullah, AP Bayuseno, J Jamari

📚 Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2023

2023

33

Analysis of the effect of ventilation hole angle and material variation on thermal behavior for car disc brakes using the finite element method

Google Scholar

👨‍🔬 M Tauviqirrahman, M Muchammad, T Setiazi, B Setiyana, J Jamari

📚 Results in Engineering 17, 100844, 2023

2023

34

Hydrothermally synthesized-nanoscale carbonated hydroxyapatite with calcium carbonates derived from green mussel shell wastes

Google Scholar

👨‍🔬 MA Irfa'i, WW Schmahl, YM Pusparizkita, S Muryanto, A Prihanto, R Ismail, ...

📚 Journal of Molecular Structure 1306, 137837, 2024

2024

35

Kinetics and morphological characteristics of struvite (MgNH4PO4. 6H2O) under the influence of maleic acid

Google Scholar

👨‍🔬 AP Bayuseno, DS Perwitasari, S Muryanto, M Tauviqirrahman, J Jamari

📚 Heliyon 6 (3), 2020

2020

36

Range of motion simulation of hip joint movement during salat activity

Google Scholar

👨‍🔬 J Jamari, IB Anwar, E Saputra, E van der Heide

📚 The Journal of Arthroplasty 32 (9), 2898-2904, 2017

2017

37

Optimization of the complex slip surface and its effect on the hydrodynamic performance of two-dimensional lubricated contacts

Google Scholar

👨‍🔬 DJ Tauviqirrahman, M., Ismail, R., Jamari, J., Schipper

📚 Computers and Fluids 79, 27-43, 2013

2013

38

Diameter ratio and friction coefficient effect on equivalent plastic strain (PEEQ) during contact between two brass solids

Google Scholar

👨‍🔬 M Danny Pratama Lamura, M Imam Ammarullah, T Hidayat, ...

📚 Cogent Engineering 10 (1), 2218691, 2023

2023

39

Analysis of rake angle effect to stress distribution on excavator bucket teeth using finite element method

Google Scholar

👨‍🔬 SH Suryo, AP Bayuseno, J Jamari, AI Wahyudi

📚 Civil Engineering Journal 3 (12), 1222-1234, 2017

2017

40

Thermal analysis of disc brakes using finite element method

Google Scholar

👨‍🔬 Jaenudin, J Jamari, M Tauviqirrahman

📚 AIP Conference Proceedings 1788 (1), 030028, 2017

2017

41

CFD analysis of journal bearing with a heterogeneous rough/smooth surface

Google Scholar

👨‍🔬 M Tauviqirrahman, J Jamari, AA Wicaksono, M Muchammad, S Susilowati, ...

📚 Lubricants 9 (9), 88, 2021

2021

42

Investigation of the tribological performance of heterogeneous slip/no-slip journal bearing considering thermo-hydrodynamic effects

Google Scholar

👨‍🔬 M Tauviqirrahman, MF Afif, P Paryanto, J Jamari, W Caesarendra

📚 Fluids 6 (2), 48, 2021

2021

43

Simulation of excavator bucket pressuring through finite element method

Google Scholar

👨‍🔬 SH Suryo, AP Bayuseno, J Jamari, G Ramadhan

📚 Civil Engineering Journal 4 (3), 2018

2018

44

Investigation of mesh model for a finite element simulation of the dual-mobility prosthetic hip joint

Google Scholar

👨‍🔬 T Hidayat, R Ismail, M Tauviqirrahman, E Saputra, MI Ammarullah, ...

📚 Jurnal Tribologi 38, 118-140, 2023

2023

45

Batch hydrothermal synthesis of nanocrystalline, thermostable hydroxyapatite at various pH and temperature levels

Google Scholar

👨‍🔬 A Prihanto, S Muryanto, R Ismail, J Jamari, AP Bayuseno

📚 Inorganic Chemistry Communications 157, 111301, 2023

2023

46

Elastohydrodynamic behavior analysis on water-lubricated journal bearing: a study of acoustic and tribological performance based on CFD-FSI approach

Google Scholar

👨‍🔬 M Tauviqirrahman, J Jamari, M Bagir, W Caesarendra, P Paryanto

📚 Journal of the Brazilian Society of Mechanical Sciences and Engineering 44 …, 2022

2022

47

Interference screws 3D printed with polymer-based biocomposites (HA/PLA/PCL)

Google Scholar

👨‍🔬 J Jamari, DF Fitriyana, PS Ramadhan, S Nugroho, R Ismail, AP Bayuseno

📚 Materials and Manufacturing Processes 38 (9), 1093-1103, 2023

2023

48

The subjective comfort test of autism hug machine portable seat

Google Scholar

👨‍🔬 MI Maula, MB Aliyafi, J Jamari, IY Afif, MI Ammarullah, TI Winarni, AL Aji

📚 Journal of Intellectual Disability-Diagnosis and Treatment 9 (3), 182-188, 2021

2021

49

Permeability Study of Functionally Graded Scaffold Based on Morphology of Cancellous Bone.

Google Scholar

👨‍🔬 I Akbar, AT Prakoso, Y Martino Astrada, MS Sinaga, MI Ammarullah, ...

📚 Malaysian Journal of Medicine & Health Sciences 17, 2021

2021

50

Mineralizing CO2 and producing polymorphic calcium carbonates from bitumen-rock asphalt manufacturing solid residues

Google Scholar

👨‍🔬 YM Pusparizkita, WW Schmahl, M Ambarita, HN Kholid, AY Sadewa, ...

📚 Cleaner Engineering and Technology 12, 100602, 2023

2023

51

Analysis of AISI material power of AISI 4140 bucket teeth excavator using influence of abrasive wear

Google Scholar

👨‍🔬 SH Suryo, AP Bayuseno, J Jamari, MAR Ramadhan

📚 AIP Conference Proceedings 1977 (1), 030022, 2018

2018

52

A study of slip position on improving the hydrodynamic lubrication performance of single-textured bearing using a mass conserving numerical approach

Google Scholar

👨‍🔬 M Tauviqirrahman, WK Ajie, E Yohana, M Muchammad, J Jamari

📚 International Journal of Engineering and Technology 8 (2), 913-921, 2016

2016

53

Numerical simulation of artificical hip joint movement for western and japanse-style activities

Google Scholar

👨‍🔬 E Saputra, I Budiwan, R Ismail, J Jamari, E van Der Heide

📚 Jurnal Teknologi 66 (3), 53-58, 2014

2014

54

Numerical study of salat movements for total hip replacement patient

Google Scholar

👨‍🔬 R Ismail, E Saputra, M Tauviqirrahman, AB Legowo, IB Anwar, J Jamari

📚 Applied Mechanics and Materials 493, 426-431, 2014

2014

55

Influence of roughness on the behavior of three-dimensional journal bearing based on fluid-structure interaction approach

Google Scholar

👨‍🔬 M Tauviqirrahman, M., Ichsan, B.C., Jamari

📚 Journal of Mechanical Science and Technology 33 (10), 4783-4790, 2019

2019

56

Stick-slip behaviour of a viscoelastic flat sliding along a rigid indenter

Google Scholar

👨‍🔬 B Setiyana, R Ismail, J Jamari, DJ Schipper

📚 Tribology Online 11 (4), 512-518, 2016

2016

57

The effect of load, diameter ratio, and friction coefficient on residual stress in a hemispherical contact for application in biomedical industry

Google Scholar

👨‍🔬 MDP Lamura, MI Ammarullah, MI Maula, T Hidayat, AP Bayuseno, ...

📚 Journal of Materials Engineering and Performance 33 (15), 7528-7536, 2024

2024

58

Investigation on acoustic, thermal, and tribological properties of hydrodynamic journal bearing with heterogeneous rough/smooth surface

Google Scholar

👨‍🔬 M Tauviqirrahman, E Yohana, Paryanto, Jamari, FS Muslim, PW Anggoro

📚 Results in Engineering 18, 101112, 2023

2023

59

Performance of textured dual mobility total hip prosthesis with a concave dimple during Muslim prayer movements

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, MI Ammarullah, M Iqbal, B Setiyana, ...

📚 Scientific reports 14 (1), 916, 2024

2024

60

Reuse of waste crab shells for synthesis of calcium carbonate as a candidate biomaterial

Google Scholar

👨‍🔬 AP Bayuseno, AI Prasetya, R Ismail, B Setiyana, J Jamari

📚 medicine 10 (14), 10.31788, 2022

2022

61

Aqueous crystallization of monocalcium phosphate monohydrate with green mussel shells (Verna piridis) for calcium sources

Google Scholar

👨‍🔬 A Prihanto, DF Fitriyana, S Muryanto, I Masykur, R Ismail, J Jamari, ...

📚 Journal of Environmental Chemical Engineering 9 (6), 106913, 2021

2021

62

Study of an additional layer of cement mantle hip joints for reducing cracks

Google Scholar

👨‍🔬 J Jamari, E Saputra, IB Anwar, E Van Der Heide

📚 Journal of Functional Biomaterials 10 (3), 40, 2019

2019

63

A method for estimating the contact area of a dual-mobility total hip prosthesis

Google Scholar

👨‍🔬 T Hidayat, MI Ammarullah, E Saputra, M Lamura, C KN, R Ismail, ...

📚 AIP Advances 14 (1), 2024

2024

64

A kinetic and structural analysis of the effects of Ca-and Fe ions on struvite crystal growth

Google Scholar

👨‍🔬 DS Perwitasari, S Muryanto, WW Schmahl, J Jamari, AP Bayuseno

📚 Solid State Sciences 134, 107062, 2022

2022

65

Effect of inertia on the cavitation phenomena of hydrodynamic textured bearings considering slip

Google Scholar

👨‍🔬 J Jamari, M Muchammad, F Hilmy, M Tauviqirrahman

📚 Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 …, 2019

2019

66

Parameter Optimization of Strategies at CNC end Milling Machine Roland Modela MDX-40R Cam Against Surface Roughness Made Insoles Shoe Orthotic EVA Rubber Foam

Google Scholar

👨‍🔬 PW ANGGORO, B Bawono, J Jamari, AP Bayusena

📚 International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS …, 2016

2016

67

Numerical investigation of the combined effects of slip and texture on tribological performance of bearing

Google Scholar

👨‍🔬 S Susilowati, M Tauviqirrahman, J Jamari, AP Bayuseno

📚 Tribology-Materials, Surfaces & Interfaces 10 (2), 86-89, 2016

2016

68

Hydrodynamic Lubrication of Textured Journal Bearing Considering Slippage: Two-dimensional CFD Analysis Using Multiphase Cavitation Model

Google Scholar

👨‍🔬 M M. Tauviqirrahman, A. Pratama, Jamari

📚 Tribology in Industry 41 (3), 401-415, 2019

2019

69

Multiphase computational fluid dynamics analysis of hydrodynamic journal bearing under the combined influence of texture and slip

Google Scholar

👨‍🔬 M Tauviqirrahman, J Jamari, BS Wibowo, HM Fauzan, M Muchammad

📚 Lubricants 7 (11), 97, 2019

2019

70

A comparison between mechanical properties of UHMWPE from ram extrusion process and UHMWPE from compression molding process for a hip joint liner

Google Scholar

👨‍🔬 M Wahyudi, YE Putra, S Arrohman, J Jamari, R Ismail

📚 IOP Conference Series: Materials Science and Engineering 432 (1), 012007, 2018

2018

71

Running-in behavior of dual-mobility cup during the gait cycle: A finite element analysis

Google Scholar

👨‍🔬 T Hidayat, R Ismail, M Tauviqirrahman, E Saputra, MI Ammarullah, ...

📚 Proceedings of the Institution of Mechanical Engineers, Part H: Journal of …, 2024

2024

72

TRIZ-based method for developing a conceptual laparoscopic surgeon’s chair

Google Scholar

👨‍🔬 G Santoso, MI Ammarullah, S Sugiharto, T Hidayat, S Khoeron, ...

📚 Cogent Engineering 11 (1), 2298786, 2024

2024

73

System dynamics modelling for calculation of carbon footprint on a non-homogeneous production system: A case in a ceramic studio

Google Scholar

👨‍🔬 PW Anggoro, T Yuniarto, B Bawono, DB Setyohadi, PS Murdapa, J Jamari

📚 Results in Engineering 17, 100812, 2023

2023

74

A comparative study of finite journal bearing in laminar and turbulent regimes using CFD (computational fluid dynamic)

Google Scholar

👨‍🔬 TM Susilowati, J Jamari, AP Bayuseno, Muchammad

📚 MATEC Web Conf. 58 (1), 10-13, 2016

2016

75

Practical insights into the recycling of green mussel shells (Perna Viridis) for the production of precipitated calcium carbonate

Google Scholar

👨‍🔬 A Prihanto, S Muryanto, R Ismail, J Jamari, AP Bayuseno

📚 Environmental Technology 45 (2), 235-245, 2024

2024

76

Investigation of contact behavior on a model of the dual-mobility artificial hip joint for Asians in different inner liner thicknesses

Google Scholar

👨‍🔬 T Hidayat, MI Ammarullah, R Ismail, E Saputra, MDP Lamura, C KN, ...

📚 World Journal of Orthopedics 15 (4), 321, 2024

2024

77

Crystallization of struvite in the presence of calcium ions: Change in reaction rate, morphology and chemical composition

Google Scholar

👨‍🔬 DS Perwitasari, S Muryanto, J Jamari, AP Bayuseno

📚 Cogent Engineering 9 (1), 2049962, 2022

2022

78

Running-in Analysis of Transmission Gear

Google Scholar

👨‍🔬 APB J. Jamari, M.I. Ammarullah, I.Y. Afif, R. Ismail, M. Tauviqirrahman

📚 Tribology in Industry 43 (3), 434-441, 2021

2021

79

Understanding of low-carbon steel marine corrosion through simulation in artificial seawater.

Google Scholar

👨‍🔬 YM Pusparizkita, VA Fardilah, C Aslan, J Jamari, AP Bayuseno

📚 AIMS Materials Science 10 (3), 2023

2023

80

Effect of surface texturing on the performance of artificial hip joint for Muslim prayer (Salat) activity

Google Scholar

👨‍🔬 M Jamari, J., Tauviqirrahman, M., Husein, H.R., Muchammad

📚 Biotribology 26, 100177, 2021

2021

81

Milling strategy optimized for orthotics insole to enhance surface roughness and machining time by Taguchi and response surface methodology

Google Scholar

👨‍🔬 B Bawono, PW Anggoro, AP Bayuseno, J Jamari, M Tauviqirrahman

📚 Journal of Industrial and Production Engineering 36 (4), 237-247, 2019

2019

82

Synthesis and characterisation of struvite family crystals by an aqueous precipitation method

Google Scholar

👨‍🔬 S Sutiyono, L Edahwati, DS Perwitasari, S Muryanto, J Jamari, ...

📚 MATEC Web of Conferences 58, 01006, 2016

2016

83

A bipolar artificial hip joint design for contact impingement reduction

Google Scholar

👨‍🔬 E Saputra, IB Anwar, J Jamari, E van der Heide

📚 Advanced materials research 1123, 164-168, 2015

2015

84

A review of enhanced total hip prosthesis design and material bearing combination to accommodate Muslim prayer (Salat) movements: Biomechanical, biotribological, and biological …

Google Scholar

👨‍🔬 MI Ammarullah, M Kozin, MI Maula, MDP Lamura, HA Wicaksono, ...

📚 Tribology International 205, 110518, 2025

2025

85

Finite element analysis of artificial hip joint implant made from stainless steel 316L

Google Scholar

👨‍🔬 APB Rilo Berdin Taqriban, Rifky Ismail , J Jamari

📚 Bali Medical Journal 10 (1), 448-452, 2021

2021

86

2D computational tresca stress prediction of CoCrMo-on-UHMWPE bearing of total hip prosthesis based on body mass index

Google Scholar

👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, ...

📚 Malays. J. Med. Health Sci 17, 18-21, 2021

2021

87

Puzzle Islamic floral patterns product tiles for wall and ceiling to decorate of Al Huda Mosque Indonesia—design, manufacturing, and fabrication

Google Scholar

👨‍🔬 PW Anggoro, AT Yuniarto, M Tauviqirrahman, J Jamari, AP Bayuseno, ...

📚 Proceedings of the 6th International Conference and Exhibition on …, 2020

2020

88

Bibliometric Analysis of Publications in the Scopus Database: A Study at Diponegoro University during 2014-2018

Google Scholar

👨‍🔬 MTHS Yos Johan Utama, Budi Setiyono, Jamari

📚 E3S Web of Conferences 125, 23001, 2019

2019

89

Understanding the occurrence of a wavy wear track on elastomeric materials

Google Scholar

👨‍🔬 M Khafidh, B Setiyana, J Jamari, MA Masen, DJ Schipper

📚 Wear 412, 23-29, 2018

2018

90

Modeling of repeated rolling contact of rigid ball on rough surface: residual stress and plastic strain analysis

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, E Saputra, J Jamari, DJ Schipper

📚 Procedia Engineering 68, 593-599, 2013

2013

91

Von Mises stress analysis of surgery chair designed for laparoscopic surgeon with lifting mechanism

Google Scholar

👨‍🔬 G Santoso, MI Ammarullah, S Sugiharto, A Mughni, AP Bayuseno, ...

📚 AIP Advances 14 (4), 2024

2024

92

OPTIMIZATION OF CNC MILLING PARAMETERS THROUGH THE TAGUCHI AND RSM METHODS FOR SURFACE ROUGHNESS OF UHMWPE ACETABULAR CUP

Google Scholar

👨‍🔬 APB W.D. LESTARI, P.W. ANGGORO, R. ISMAIL, J. JAMARI

📚 International Journal of Mechanical Engineering and Technology 10 (2), 1762-1775, 2019

2019

93

Graphite as dry lubricant to reduce rail wheels wear level

Google Scholar

👨‍🔬 J Suparno, DA Halim, J Junaidi, A Setiawan, M Effendy, J Jamari

📚 Materials Science Forum 961, 126-133, 2019

2019

94

Electrodeposited Zn and Zn–CaCO3 composite on mild steel for biodiesel storage tanks: Corrosion resistance evaluation

Google Scholar

👨‍🔬 VA Fardilah, WW Schmahl, YM Pusparizkita, C Aslan, M Tauviqirrahman, ...

📚 Results in Surfaces and Interfaces 18, 100426, 2025

2025

95

Investigating the Effect of Deacetylation Temperature on the Characterization of Chitosan from Crab Shells as a Candidate for Organic Nanofluids

Google Scholar

👨‍🔬 R Ismail, DF Fitriyana, AP Bayuseno, Jamari

📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 103 (2 …, 2023

2023

96

Design of eco-friendly pen made of coconut shell waste

Google Scholar

👨‍🔬 B Yulianto, G Kurnia, J Jamari, AP Bayuseno

📚 E3S Web of Conferences 125, 03002, 2019

2019

97

Human bone marrow-derived mesenchymal cell reactions to 316L stainless steel: an in vitro study on cell viability and interleukin-6 expression

Google Scholar

👨‍🔬 IB Anwar, A Santoso, E Saputra, R Ismail, J Jamari, E Van der Heide

📚 Advanced pharmaceutical bulletin 7 (2), 335, 2017

2017

98

Chemical precipitation of nanocrystalline hydroxyapatite with calcium carbonate derived from green mussel shell wastes and several phosphorus sources

Google Scholar

👨‍🔬 V Naubnome, A Prihanto, WW Schmahl, YM Pusparizkita, R Ismail, ...

📚 Case Studies in Chemical and Environmental Engineering 11, 101154, 2025

2025

99

Indirect mineral carbonation of natural asphalt extraction solid waste residue via pH and temperature control

Google Scholar

👨‍🔬 M Ambarita, D Ardiansyah, WW Schmahl, YM Pusparizkita, R Ismail, ...

📚 Case Studies in Chemical and Environmental Engineering 9, 100715, 2024

2024

100

Comfort evaluation and physiological effects/autonomic nervous system response of inflatable deep pressure vest in reducing anxiety

Google Scholar

👨‍🔬 MI Maula, MI Ammarullah, HN Fadhila, IY Afif, H Hardian, J Jamari, ...

📚 Heliyon 10 (16), 2024

2024

101

A comparative study on turbulent models for three-dimensional thermo-hydrodynamic analysis of textured thrust bearing

Google Scholar

👨‍🔬 M Tauviqirrahman, Y Lim, J Jamari, M Muchammad, BO Pugastri, ...

📚 Cogent Engineering 11 (1), 2402048, 2024

2024

102

Numerical investigation of the mechanical properties of 3D printed PLA scaffold

Google Scholar

👨‍🔬 Z Abidin, IG Fadhlurrahman, I Akbar, RU Putra, AT Prakoso, MZ Kadir, ...

📚 5th FIRST T1 T2 2021 International Conference (FIRST-T1-T2 2021), 83-89, 2022

2022

103

Design of hug machine portable seat for autistic children in public transport application

Google Scholar

👨‍🔬 IY Afif, MI Maula, MB Aliyafi, AL Aji, TI Winarni, J Jamari

📚 IOP Conference Series: Materials Science and Engineering 1096 (1), 012034, 2021

2021

104

Optimization of struvite crystallization and heavy metal recovery in wastewater using response surface methodology

Google Scholar

👨‍🔬 AP Perwitasari, D.S., Muryanto, S., Jamari, J., Bayuseno

📚 Oriental Journal of Chemistry 34 (1), 336-245, 2018

2018

105

An analytical study of the wear pattern of an abraded rubber surface: the interaction model

Google Scholar

👨‍🔬 B Setiyana, R Ismail, J Jamari, DJ Schipper

📚 Tribology-Materials, Surfaces & Interfaces 12 (4), 186-192, 2018

2018

106

Analysis of the contact area of smooth and rough surfaces in contact with sphere indenter using finite element method

Google Scholar

👨‍🔬 Kartini, E Saputra, R Ismail, J Jamari, AP Bayuseno

📚 MATEC Web of Conferences 58, 04007, 2016

2016

107

Finite element study of contact pressure distribution on inner and outer liner in the bipolar hip prosthesis

Google Scholar

👨‍🔬 E Saputra, IB Anwar, R Ismail, J Jamari, E Van Der Heide

📚 AIP Conference Proceedings 1725 (1), 020075, 2016

2016

108

Reconstruction of the artificial knee joint using a reverse engineering approach based on computer-aided design

Google Scholar

👨‍🔬 D Darmanto, R Novriansyah, R Ismail, J Jamari, PW Anggoro, ...

📚 Journal of Medical Engineering & Technology 46 (2), 136-147, 2022

2022

109

Reverse engineering from 3D mesh to ceramic product in the form of miranda kerr tea for one teapot in PT doulton Indonesia

Google Scholar

👨‍🔬 PW Anggoro, AR Tan Wijaya, T Yuniarto, AP Bayuseno, J Jamari, ...

📚 Cogent Engineering 8 (1), 1981522, 2021

2021

110

Friction and wear analysis of UHMWPE material using pin-on-disc tester with lubricant and non-lubricant

Google Scholar

👨‍🔬 M Wahyudi, R Ismail, J Jamari

📚 Journal of Physics: Conference Series 1569 (3), 032057, 2020

2020

111

MITIGATION OF CaCO3 SCALE FORMATION IN PIPES UNDER INFLUENCE OF VIBRATION AND ADDITIVES

Google Scholar

👨‍🔬 JJAPB W. Mangestiyono, S. Muryanto

📚 Rasayan Journal of Chemistry 12 (1), 192 - 204, 2019

2019

112

Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion

Google Scholar

👨‍🔬 J Jamari, R Ismail, IB Anwar, E Saputra, M Tauviqirrahman, EVD Heide

📚 AIP Conference Proceedings 1725 (1), 020030, 2016

2016

113

Friction reduction in lubricated-MEMS with complex slip surface pattern

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 Procedia engineering 68, 331-337, 2013

2013

114

Study of application of coconut coir fiber-based wood-based panels: A literature review

Google Scholar

👨‍🔬 NMH Bawono, B Bawono, PW Anggoro, J Jamari

📚 Composites Part C: Open Access 17, 100588, 2025

2025

115

Rapid synthesis of monocalcium phosphate using calcium carbonate extracted from green mussel shells and phosphoric acid solution

Google Scholar

👨‍🔬 A Prihanto, S Muryanto, YM Pusparizkita, R Ismail, J Jamari, ...

📚 International Journal of Hydrogen Energy 49, 1200-1209, 2024

2024

116

In-depth knowledge of the low-temperature hydrothermal synthesis of nanocrystalline hydroxyapatite from waste green mussel shell (Perna Viridis)

Google Scholar

👨‍🔬 A Prihanto, S Muryanto, A Sancho Vaquer, WW Schmahl, R Ismail, ...

📚 Environmental Technology 45 (12), 2375-2387, 2024

2024

117

Weighted vest combined with vibrotactile stimulations decrease the sympathetic activity: a repeated measures study

Google Scholar

👨‍🔬 MI Maula, MI Ammarullah, CM Nugwita, MS Faisal, IY Afif, FA Husaini, ...

📚 Health Science Reports 7 (11), e70194, 2024

2024

118

Assessing the calming effects of a self-regulated inflatable vest: an evaluation based on Visual Analogue Scale and Electroencephalogram

Google Scholar

👨‍🔬 MI Maula, IY Afif, MI Ammarullah, MDP Lamura, J Jamari, TI Winarni

📚 Cogent Engineering 11 (1), 2313891, 2024

2024

119

Power Optimization of The Horizontal Axis Wind Turbine Capacity of 1 MW on Various Parameters of The Airfoil, an Angle of Attack, and a Pitch Angle

Google Scholar

👨‍🔬 Kriswanto, MAB Setiawan, DH Al-Janan, Jamari

📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 103 (2 …, 2023

2023

120

Chairless Chairs for Orthopedic Surgery Purpose - A Literature Review

Google Scholar

👨‍🔬 G Santoso, S Sugiharto, A Mughni, MI Ammarullah, AP Bayuseno, ...

📚 Open Access Macedonian Journal of Medical Sciences 10 (F), 146-152, 2022

2022

121

Running-in behavior on single-mobility total hip arthroplasty

Google Scholar

👨‍🔬 T Hidayat, J Jamari, AP Bayuseno, R Ismail, M Tauviqirrahman, E Saputra

📚 Medical Engineering & Physics 104 (1), 103806, 2022

2022

122

Mechanical properties of Carbon-matrix composites for a blade runner’s artificial leg

Google Scholar

👨‍🔬 R Ismail, D Paras Utami, M Arid Irfai, J Jamari, AP Bayuseno

📚 Cogent Engineering 8 (1), 1923382, 2021

2021

123

Optimasi Numerik Permukaan Bertekstur pada Total Hip Arthroplasty untuk Mengurangi Tekanan Kontak dengan Variabel Profil dan Kedalaman

Google Scholar

👨‍🔬 JJ M. I. Ammarullah, H. Basri, I. Haryanto

📚 ROTASI 23 (1), 50-54, 2021

2021

124

Designing and wear testing of Excavator bucket teeth for the need of Indonesian mining

Google Scholar

👨‍🔬 JJAPB R. Ismail, Z. Muhammad

📚 ARPN Journal of Engineering and Applied Sciences 15 (1), 21-26, 2020

2020

125

Reverse Innovative Design of Insole Shoe Orthotic for Diabetic Patient

Google Scholar

👨‍🔬 APBAW P.W. Anggoro , B. Bawono , M. Tauviqirrahman , J. Jamari

📚 Journal of Engineering and Applied Sciences 14 (1), 106-113, 2019

2019

126

Controlling of calcium carbonate scale deposition on the piping system with laminar flow and in the presence of citric acids

Google Scholar

👨‍🔬 S Raharjo, S Muryanto, J Jamari, AP Bayuseno

📚 Journal of Physics: Conference Series 1150 (1), 012058, 2019

2019

127

Design and manufacturing orthotics shoe insole with optimum surface roughness using the CNC milling

Google Scholar

👨‍🔬 PW ANGGORO, B BAWONO, M Tauviqirrahman, AP Bayusena, J Jamari

📚 Journal of Engineering Science and Technology 14 (4), 1799-1819, 2019

2019

128

Effects of the optimised pH and molar ratio on struvite precipitation in aqueous system

Google Scholar

👨‍🔬 L Edahwati, S Sutiyono, DS Perwitasari, S Muryanto, J Jamari, ...

📚 MATEC Web of Conferences 58, 01018, 2016

2016

129

Optimization of calcium sulfate precipitated in the laminar flow pipe through response surface modeling of temperature, Ca2+ concentration and citric acid additives

Google Scholar

👨‍🔬 S Raharjo, S Muryanto, J Jamari, AP Bayuseno

📚 Oriental Journal of Chemistry 32 (6), 3145-3154, 2016

2016

130

Analisa Gait Cycledan Beban Statis Produk Kaki Tiruanatas Lutut (Above Knee Prosthesis) Menggunakan Metode Elemen Hingga

Google Scholar

👨‍🔬 M Dzulfikar, J Jamari, R Ismail, S Sugiyanto, D Setyawan

📚 Majalah Ilmiah Momentum 11 (2), 2015

2015

131

Two‐Dimensional Finite Element Analysis on Running‐in of Elastic‐Plastic Rolling Contact

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, Jamari, DJ Schipper

📚 AIP Conference Proceedings 1325 (1), 190-193, 2010

2010

132

Narrative Review of Subchondral Bone Morphology on Cartilage Damage (Osteoarthritis)

Google Scholar

👨‍🔬 NY Mahendra, DP Putra, I Akbar, RU Putra, AT Prakoso, M Yanis, ...

📚 5th FIRST T1 T2 2021 International Conference (FIRST-T1-T2 2021), 77-82, 2022

2022

133

Mechanical and thermal deformations effects on plain journal bearing with isoviscous boundary condition based on CFD and FSI methods

Google Scholar

👨‍🔬 J Muchammad, Tauviqirrahman, M, Soetopo, H.S.S.

📚 Jurnal Tribologi 28, 63-81, 2021

2021

134

Reducing contact stress of the surface by modifying different hardness of femoral head and cup in hip prosthesis

Google Scholar

👨‍🔬 E Saputra, I Budiwan Anwar, J Jamari, E Heide

📚 Frontiers in Mechanical Engineering 7, 631940, 2021

2021

135

Numerical investigation of the hardness of tire rubber material by indentation method

Google Scholar

👨‍🔬 B Setiyana, C Prabowo, J Jamari, R Ismail, S Sugiyanto, E Saputra

📚 Journal of Physics: Conference Series 1517 (1), 012020, 2020

2020

136

Analysis of the effect of the slip-pocket in single and double parallel bearing considering cavitation: A theoretical approach

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, J Jamari, DJ Schipper

📚 Lubricants 9 (1), 3, 2020

2020

137

Optimization of mechanical parameters on outsole shoes orthotic comfort using finite element analysis

Google Scholar

👨‍🔬 YEA Putra, PW Anggoro, T Yuniarto, AP Bayuseno, J Jamari, B Bawono

📚 2019 International Biomedical Instrumentation and Technology Conference …, 2019

2019

138

Effect of short-term deep-pressure portable seat on behavioral and biological stress in children with autism spectrum disorders: A pilot study. Bioengineering. 2022; 9 (2): 48

Google Scholar

👨‍🔬 IY Afif, M Farkhan, O Kurdi, MI Maula, MI Ammarullah, B Setiyana, ...

📚 s Note: MDPI stays neutral with regard to jurisdictional claims in published …, 2022

2022

139

Wear analysis of acetabular cup on metal-on-metal total hip arthroplasty with dimple addition using finite element method

Google Scholar

👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, ...

📚 AIP Conference Proceedings 2391 (1), 020017, 2022

2022

140

Hydrodynamic lubrication analysis of hydrophobic textured journal bearing considering cavitation

Google Scholar

👨‍🔬 M Tauviqirrahman, J Jamari, M Muchammad, A Ardiansyah, B Setiyana, ...

📚 Cogent Engineering 9 (1), 2069997, 2022

2022

141

Study of lubrication fluid pressure in artificial hip joint during bowing (Ruku’)

Google Scholar

👨‍🔬 T Hidayat, J Jamari, AP Bayuseno, R Ismail, M Tauviqirrahman, ...

📚 International Conference and Exhibition on Sustainable Energy and Advanced …, 2021

2021

142

Machining Parameter Optimization of EVA Foam Orthotic Shoe Insoles

Google Scholar

👨‍🔬 AH Paulus Wisnu Anggoro, Abet Adhy Anthony, Mohammad Tauviqirrahman, Jamari ...

📚 International Journal of Engineering and Technology Innovation 10 (3), 179-190, 2020

2020

143

Optimization parameters tooling design to increase the surface quality of orthotic insole shoes using the Taguchi approach and surface response methods

Google Scholar

👨‍🔬 B Bawono, PW Anggoro, M Tauviqirrahman, J Jamari, AP Bayuseno, ...

📚 Materials Today: Proceedings 13, 47-52, 2019

2019

144

The effect of additional layer between liner and PMMA on reducing cracks of cement mantle hip joints

Google Scholar

👨‍🔬 J Jamari, AL Han, E Saputra, IB Anwar, E van der Heide

📚 International Journal of Engineering and Technology Innovation 8 (2), 99-106, 2018

2018

145

Numerical analysis of stress distribution on artificial hip joint due to jump activity

Google Scholar

👨‍🔬 GP Annanto, E Saputra, J Jamari, AP Bayuseno, R Ismail, ...

📚 E3S Web of Conferences 73, 12005, 2018

2018

146

Wear Analysis of Spherical Graphite Cast Iron Using Pin-on Disc Tribotester

Google Scholar

👨‍🔬 J Mohammad Tauviqirrahman, Bayu Kurniawan

📚 Journal of Physical Science 29 (2), 15-26, 2018

2018

147

Finite element study of the effect of UHMWPE liner thickness on the contact area and stress distribution in a bipolar hip joint

Google Scholar

👨‍🔬 J Jamari, E Saputra, IB Anwar, R Ismail, EVD Heide

📚 IOP Conference Series: Materials Science and Engineering 202 (1), 012095, 2017

2017

148

Strength analysis of monocoque frame construction in an electric city car using finite element method

Google Scholar

👨‍🔬 A Makhrojan, SS Budi, J Jamari, A Suprihadi, R Ismail

📚 Proceedings of the Joint International Conference on Electric Vehicular …, 2015

2015

149

Microwave-assisted synthesis of nanocrystalline hydroxyapatite using calcium supplies from green mussel shells with synthesis time optimization

Google Scholar

👨‍🔬 DF Fitriyana, RC Muhammadin, YM Pusparizkita, R Ismail, J Jamari, ...

📚 Nano-Structures & Nano-Objects 42, 101484, 2025

2025

150

Microwave-assisted hydrothermal synthesis of carbonated apatite with calcium and phosphate resources derived from green mussel shell and bovine bone wastes

Google Scholar

👨‍🔬 MA Irfa'i, S Muryanto, A Prihanto, YM Pusparizkita, R Ismail, J Jamari, ...

📚 Environmental Advances 17, 100582, 2024

2024

151

Calcination-based direct extraction of hydroxyapatite from bovine bone waste

Google Scholar

👨‍🔬 MA Irfa’i, S Muryanto, YM Pusparizkita, A Prihanto, A Sancho Vaquer, ...

📚 Environmental technology 45 (28), 6249-6261, 2024

2024

152

Reverse Engineering Artificial Knee Joint using 3D Scanning

Google Scholar

👨‍🔬 Y Setyoadi, R Ismail, J Jamari, AP Bayuseno, R Novriansyah, ...

📚 2023 IEEE International Biomedical Instrumentation and Technology Conference …, 2023

2023

153

Advanced design and fabrication of islamic tile ceramic wall tiles with Indonesian batik patterns using artistic CAD/CAM and 3D printing technology

Google Scholar

👨‍🔬 PW Anggoro, T Yuniarto, B Bawono, DB Setyohadi, S Felasari, ...

📚 Frontiers in Mechanical Engineering 7, 799086, 2022

2022

154

Optimization of milling parameters to increase surface quality and machining time of the bohler m303 extra

Google Scholar

👨‍🔬 Kriswanto, W Sumbodo, W Aryadi, J Jamari

📚 IOP Conference Series: Earth and Environmental Science 700 (1), 012009, 2021

2021

155

Friction and Wear Pattern of Silica-Reinforced Styrene-Butadiene Rubber (SBR) in Sliding Contact with a Blade Indenter

Google Scholar

👨‍🔬 B Setiyana, Jamari, M Khafidh, M Tauviqirrahman, R Ismail, DJ Schipper

📚 Lubricants 9 (11), 110, 2021

2021

156

Mechanical properties of Aisi 316L for artificial hip joint materials made by investment casting

Google Scholar

👨‍🔬 RAN Al Hakim, O Kurdi, R Ismail, S Nugroho, J Jamari, DF Fitriyana, ...

📚 International Journal of Advanced Research in Engineering and Technology 11 (6), 2020

2020

157

Computational Analysis of Different Designed Hip Joint Prostheses Using Finite Element Method

Google Scholar

👨‍🔬 RB Taqriban, R Ismail, J Jamari, AP Bayuseno

📚 2020 7th International Conference on Information Technology, Computer, and …, 2020

2020

158

A 3-dimensional computational fluid-structure interaction analysis in the hip-joint prosthesis during solat (prayer) activity

Google Scholar

👨‍🔬 M Bayu Siswo Wibowo, Prayudha Naufal Wijaya, Mohammad Tauviqirrahman, Rifky ...

📚 Jurnal Tribologi 20, 125-141, 2019

2019

159

A Wear Formulation of Total Hip Prosthesis for Salat Activity

Google Scholar

👨‍🔬 EH Eko Saputra, Iwan Budiwan Anwar, Jamari, J.

📚 International Review of Mechanical Engineering 13 (1), 29-37, 2019

2019

160

CNC milling of EVA foam with varying hardness for custom orthotic shoe insoles and process parameter optimization

Google Scholar

👨‍🔬 PW ANGGORO, AA ANTHONY, B BAWONO, J Jamari, AP Bayusena, ...

📚 Journal of Mechanical Engineering and Sciences 13 (3), 5347-5370, 2019

2019

161

Evaluation in conceptual design of human powered sand sieving machine

Google Scholar

👨‍🔬 G Kurnia, B Yulianto, J Jamari, AP Bayuseno

📚 E3S Web of Conferences 125, 03001, 2019

2019

162

Analysis of non-Newtonian lubricated textured contact for mixed slip/no-slip configuration considering cavitation

Google Scholar

👨‍🔬 AW Pratomo, Muhammad, M Tauviqirrahman, J Jamari, AP Bayuseno

📚 Journal of physics: Conference series 1217 (1), 012014, 2019

2019

163

Kinetics analysis of synthesis reaction of struvite with air-flow continous vertical reactors

Google Scholar

👨‍🔬 L Edahwati, S Sutiyono, S Muryanto, J Jamari, DAP Bayuseno

📚 Journal of Physics: Conference Series 953 (1), 012245, 2018

2018

164

Dimensional accuracy and surface roughness of acetabular liner with UHMWPE: Assessment results between compression molding and CNC milling

Google Scholar

👨‍🔬 AP Lestari, W.D., Nababan, D.K., Ismail, R., Jamari, J., Bayuseno

📚 International Review of Mechanical Engineering 12 (6), 516-521, 2018

2018

165

Scale Formation Of Barium Sulfate In The Piping Flow System: Mineralogy And Morphology Evalution

Google Scholar

👨‍🔬 N Karaman, J Jamari, AP Bayuseno, S Muryanto

📚 J. Teknik Kimia Universitas pembangunan nasioonal “Veteran” Jawa Timur 23, 2017

2017

166

Study of unipolar and bipolar hip prostheses using finite element simulation: contact stress analysis

Google Scholar

👨‍🔬 E Saputra, IB Anwar, R Ismail, J Jamari, E Van Der Heide

📚 Key Engineering Materials 739, 96-102, 2017

2017

167

The influence of vibration on CaCO3 scale formation in piping system

Google Scholar

👨‍🔬 W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno

📚 MATEC Web of Conferences 58, 01027, 2016

2016

168

Preliminary study on the biocompatibility of stainless steel 316L and UHMWPE material

Google Scholar

👨‍🔬 IB Anwar, E Saputra, J Jamari, E van der Heide

📚 Advanced Materials Research 1123, 160-163, 2015

2015

169

Perancangan Biomekanisme Sendi Protesa Untuk Pasien Amputasi Tungkai Di Atas Lutut Dengan Desain Ergonomi Dan Fleksibel

Google Scholar

👨‍🔬 D Bactiar, A Audy, J Jamari, I Budiwan

📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2014

2014

170

A microwave-assisted hydrothermal method for rapidly synthesizing nanocrystalline carbonated hydroxyapatite from calcium resources in crab shell waste

Google Scholar

👨‍🔬 YM Pusparizkita, RA Faizal, SAP Negara, R Ismail, J Jamari, ...

📚 Next Materials 9, 100946, 2025

2025

171

Using selective HCl and H2SO4 acids to extract calcium from extracted asphalt waste residues in preparation for subsequent indirect mineral carbonation

Google Scholar

👨‍🔬 M Ambarita, YM Pusparizkita, WW Schmahl, G Reswara, MM Putra, ...

📚 Case Studies in Chemical and Environmental Engineering 10, 100998, 2024

2024

172

Optimisation of the machining time required by insole orthotic shoes for patients with clubfoot using the Taguchi and response surface methodology approach

Google Scholar

👨‍🔬 PW Anggoro, B Bawono, DB Setyohadi, L Ratnasari, PK Fergiawan, ...

📚 Heliyon 9 (6), 2023

2023

173

Sustainable additive manufacturing of interference screws made from eco-friendly filament for anterior cruciate ligament reconstruction

Google Scholar

👨‍🔬 LPS Hartanti, Haniel, FW Nugraha, PW Anggoro, R Ismail, J Jamari, ...

📚 IOP Conference Series: Earth and Environmental Science 1268 (1), 012065, 2023

2023

174

A review on flexion angle in high-flexion total knee arthroplasty for indonesian’s need

Google Scholar

👨‍🔬 D Darmanto, R Novriansyah, PW Anggoro, R Ismail, J Jamari, ...

📚 Frontiers in Mechanical Engineering 8, 1049796, 2022

2022

175

Optimization of the toolpath strategy for the master ceramic jewelry mold pattern using the rhinoceros software and router cnc machine

Google Scholar

👨‍🔬 SW Ratnanta, PW Anggoro, PK Fergiawan, J Jamari, AP Bayuseno

📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021

2021

176

Reverse innovative design and manufacturing strategy for optimizing production time of customized orthotic insoles with CNC milling

Google Scholar

👨‍🔬 PW Anggoro, AA Anhony, M Tauviqirrahman, J Jamari, AP Bayuseno

📚 Journal of Physics: Conference Series 1517 (1), 012045, 2020

2020

177

Auto-Stirring Grains Bed Dryer as an Innovative Efficiency Solution

Google Scholar

👨‍🔬 DZ Sjechlad, J Jamari, SA Widyanto

📚 E3S Web of Conferences 125, 13001, 2019

2019

178

Effects of five green inhibitors of controlling barite crystal growth in flow-induced vibration in pipe

Google Scholar

👨‍🔬 N Karaman, W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno

📚 Rasayan Journal of Chemistry 12 (4), 1734-1743, 2019

2019

179

A study of the compression molding method for manufacturing a UHMWPE liner

Google Scholar

👨‍🔬 FS Wicaksono, R Ismail, J Jamari

📚 IOP Conference Series: Materials Science and Engineering 432 (1), 012006, 2018

2018

180

Design of a hip prosthetic tribometer based on salat gait cycle

Google Scholar

👨‍🔬 T Towijaya, R Ismail, J Jamari

📚 AIP Conference Proceedings 1788 (1), 030071, 2017

2017

181

Microstructure analysis in friction welding of copper and aluminum

Google Scholar

👨‍🔬 AGW Wibowo, R Ismail, J Jamari

📚 AIP Conference Proceedings 1725 (1), 020095, 2016

2016

182

Radial forces analysis and rotational speed test of radial permanent magnetic bearing for horizontal axis wind turbine applications

Google Scholar

👨‍🔬 Kriswanto, Jamari

📚 AIP Conference Proceedings 1725 (1), 020034, 2016

2016

183

Reverse innovative design from 3D mesh to 3D model of insole shoe orthotic

Google Scholar

👨‍🔬 PW ANGGORO, B BAWONO, A Wicaksono, J Jamari, AP Bayusena

2016

184

A numerical investigation of mechanical behavior of unfilled styrene-butadiene rubber by static straight blade indentation

Google Scholar

👨‍🔬 B Setiyana, R Ismail, J Jamari, DJ Schipper

📚 Proceedings of Malaysian International Tribology Conference 2015, 68-69, 2015

2015

185

Hydrothermally synthesized nano precipitated calcium carbonate from natural asphalt extraction residues for use with polyvinyl chloride composite

Google Scholar

👨‍🔬 M Ambarita, YM Pusparizkita, WW Schmahl, YC Setiawan, ...

📚 Next Materials 8, 100928, 2025

2025

186

The synergistic influence of texture and slip formations in hydrodynamic thrust bearings on tribological characteristics

Google Scholar

👨‍🔬 I Syafaat, ZIH Rois, M Muchammad, M Tauviqirrahman, B Setiyana, ...

📚 Results in Engineering 21, 101779, 2024

2024

187

Elastohydrodynamic analysis of composite material with roughness effect on multistep journal bearing tribological performance

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, S Farhansyah, M Iqbal, B Setiyana, ...

📚 Jurnal Tribologi 40, 39-60, 2024

2024

188

Development of ceramic jewellery industry in the form of necklaces with Indonesian batik motifs

Google Scholar

👨‍🔬 T Yuniarto, PW Anggoro, B Bawono, PK Fergiawan, AP Bayuseno, ...

📚 Proceedings of 7th International Conference on Industrial, Mechanical …, 2023

2023

189

CALCINATION AND HYDROTHERMAL PROCESSING OF BOVINES BONES FOR CALCIUM PHOSPHATES EXTRACTION.

Google Scholar

👨‍🔬 MA Irfa'i, A Prihanto, S Muryanto, R Ismail, J Jamari, AP Bayuseno

📚 Rasayan Journal of Chemistry 16 (3), 2023

2023

190

CFD analysis of hydrodynamic journal bearing with Bingham plastic lubricant considering roughness

Google Scholar

👨‍🔬 M Tauviqirrahman, P Paryanto, BO Pugastri, AP Hamonangan, ...

📚 Cogent Engineering 10 (1), 2213537, 2023

2023

191

Rotor Power Optimization of Horizontal Axis Wind Turbine from Variations in Airfoil Shape, Angle of Attack, and Wind Speed

Google Scholar

👨‍🔬 F Romadlon, DH Al-Janan, W Aryadi, RF Naryanto, S Anis, I Sukoco

📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 94 (1 …, 2022

2022

192

Precipitated calcium carbonate derived from Green Mussel Shells extracted from Magnesium Chloride containing solution

Google Scholar

👨‍🔬 MA Irfa’i, A Prihanto, S Muryanto, J Jamari, R Ismail, AP Bayuseno

📚 IOP Conference Series: Earth and Environmental Science 1098 (1), 012021, 2022

2022

193

Utilization of green mussel shell waste for calcium carbonate synthesis through the carbonation method with temperature variation

Google Scholar

👨‍🔬 A Prihanto, S Muryanto, R Ismail, J Jamari, AP Bayuseno

📚 IOP Conference Series: Earth and Environmental Science 1098 (1), 012022, 2022

2022

194

Flame spray coating of α-tricalcium phosphate on AISI 316L alloy

Google Scholar

👨‍🔬 RB Taqriban, DF Fitriyana, R Ismail, J Jamari, AP Bayuseno

📚 Cogent Engineering 9 (1), 2113014, 2022

2022

195

Study of wear performance of crosslinking UHMWPE acetabular liner for artificial hip joint made from CNC milling

Google Scholar

👨‍🔬 WD Lestari, A Nugroho, R Ismail, J Jamari, AP Bayuseno

📚 IOP Conference Series: Materials Science and Engineering 1078 (1), 012009, 2021

2021

196

Simulation of manufacturing strategy of an orthotic boots shoe insole product with a Computer-Aided Manufacturing for club foot patient

Google Scholar

👨‍🔬 JAPB P.K. Fergiawan, P.W. Anggoro, A.A. Anthony, M. Tauviqirrahman

📚 IOP Conference Series: Materials Science and Engineering 1034, 012095, 2021

2021

197

Computer-Aided design for analyzing the influence of single radius on flexion angle of artificial knee joint

Google Scholar

👨‍🔬 D Darmanto, R Novriansyah, R Ismail, J Jamari, AP Bayuseno, ...

📚 2021 IEEE International Biomedical Instrumentation and Technology Conference …, 2021

2021

198

Inertia and slip effect on a single textured hydrodynamic thrust bearing using CFD methods

Google Scholar

👨‍🔬 M Muchammad, O Triandani, M Tauviqirrahman, F Hilmy, J Jamari

📚 Journal of Physics: Conference Series 1517 (1), 012011, 2020

2020

199

Risk of impingement on polyethylene liner of total hip arthroplasty prosthesis during muslim prayer (Salat) activity

Google Scholar

👨‍🔬 IB Anwar, E Saputra, R Ismail, J Jamari, E Van der Heide

📚 Open Access Macedonian Journal of Medical Sciences 8 (F), 65-69, 2020

2020

200

Simulasi Performa Turbin Propeller Dengan Sudut Pitch Yang Divariasikan

Google Scholar

👨‍🔬 P Pribadyo, H Hadiyanto, J Jamari

📚 Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi 6 (1), 54-63, 2020

2020

201

The Modeling Of A Conceptual Engineering Design System Using The Decision-Matrix Logic

Google Scholar

👨‍🔬 S Ramdhani, J Jamari

📚 MATEC Web of Conferences 159, 02022, 2018

2018

202

The influence of tool path strategies on surface roughness and machining time in the CNC milling of UHMWPE

Google Scholar

👨‍🔬 APB W.D. Lestari , P.W. Anggoro , P.K. Fergiawan , R. Ismail, J. Jamari

📚 Journal of Engineering and Applied Sciences 13 (1), 259-263, 2018

2018

203

The Evaluation of the Use of AFO (Ankle Foot Orthotics) with the MOXFQ (Manchester-Oxford Foot Questionnaire) Method

Google Scholar

👨‍🔬 B Bawono

📚 Proceedings of the International Conference on Science and Technology (ICST …, 2018

2018

204

Inertia effect of textured lubricated contact on the bearing performance using CFD approach

Google Scholar

👨‍🔬 F Hilmy, M Muchammad, M Tauviqirrahman, J Jamari

📚 Journal of Physics: Conference Series 1090 (1), 012041, 2018

2018

205

Theoretical investigation of boundary slip on the hydrodynamic lubrication performance in pocketed bearings including cavitation

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, AW Pratomo, J Jamari, DJ Schipper

📚 International Journal of Surface Science and Engineering 11 (2), 100-117, 2017

2017

206

The effect of linear spring number at side load of McPherson suspension in electric city car

Google Scholar

👨‍🔬 SS Budi, A Suprihadi, A Makhrojan, R Ismail, J Jamari

📚 AIP Conference Proceedings 1788 (1), 030076, 2017

2017

207

The von Mises stress distribution on the surface of UHMWPE with texture-shaped variation in the presence of normal load and dry sliding contact

Google Scholar

👨‍🔬 WD Lestari, J Jamari, AP Bayuseno

📚 AIP Conference Proceedings 1831 (1), 020055, 2017

2017

208

Investigation of the Influence of Shapes-Texture on Surface Deformation of UHMWPE as a Bearing Material in Static Normal Load and Rolling Contact

Google Scholar

👨‍🔬 WD Lestari, R Ismail, J Jamari, AP Bayuseno

📚 IOP Conference Series: Materials Science and Engineering 202 (1), 012098, 2017

2017

209

The effect of the wall thickness on wear of an UHMWPE acetabular liner

Google Scholar

👨‍🔬 J Jamari, A Hidayat, E Saputra, IB Anwar, R Ismail, E van der Heide

📚 Advanced Materials Research 1123, 196-200, 2015

2015

210

Perhitungan Keausan Pin pada Sistem Kontak Sliding Pin-on-disc Menggunakan Metode Analitik dan Metode Elemen Hingga

Google Scholar

👨‍🔬 E SAPUTRA, J JAMARI

📚 Mechanical Engineering Departement of Diponegoro University, 2010

2010

211

Fixture design effects on posterior dental implant stability using finite element analysis (FEA): a systematic review

Google Scholar

👨‍🔬 K Kriswanto, J Jamari, R Andika, AP Bayuseno, AA Yusuf, MI Ammarullah

📚 Head & Face Medicine, 2025

2025

212

Control design of vibrotactile stimulation on weighted vest for deep pressure therapy

Google Scholar

👨‍🔬 FA Husaini, MI Maula, MI Ammarullah, IY Afif, MDP Lamura, J Jamari, ...

📚 bmj 13, 4952, 2024

2024

213

The Effect of Depolymerization Treatment on Modified Properties of Chitosan Derived from Crab Shells as a Candidate for Bioabsorbable Screw Materials

Google Scholar

👨‍🔬 DF Fitriyana, R Ismail, AP Bayuseno, S Anis, B Priwintoko, Y Subagyo, ...

📚 J. Adv. Res. Fluid Mech. Therm. Sci. 2 (2), 56-66, 2024

2024

214

A scoping review of the additive manufacturing of mandibular implants

Google Scholar

👨‍🔬 R Winarso, R Ismail, PW Anggoro, J Jamari, AP Bayuseno

📚 Frontiers in Mechanical Engineering 9, 1-16, 2023

2023

215

Study of slip and cavitation condition in the open pocket hydrodynamic thrust bearing

Google Scholar

👨‍🔬 I Syafaat, RA Ababil, RC Gunawan, M Tauviqirrahman, E Yohana, ...

📚 Jurnal Tribologi 37, 58-75, 2023

2023

216

Performance analysis of a new design concept of journal bearing with surface roughness

Google Scholar

👨‍🔬 M Tauviqirrahman, J Jamari, B Setiyana, M Muchammad, D Prabowo

📚 Jurnal Tribologi 38, 1-18, 2023

2023

217

Optimization fused deposition modeling parameter of interference screw using full factorial design

Google Scholar

👨‍🔬 LPS Hartanti, PW Anggoro, R Ismail, J Jamari, AP Bayuseno

📚 2023 IEEE International Biomedical Instrumentation and Technology Conference …, 2023

2023

218

Design and production of multifunctional food oven with energy-saving gas fuel

Google Scholar

👨‍🔬 W Sumbodo, Kriswanto, A Setiyawan, J Pamiyanto, DH Hadikawuryan, ...

📚 IOP Conference Series: Earth and Environmental Science 969 (1), 012023, 2022

2022

219

Stress and displacement analysis of powder packaging machine of capacity 2,600 pcs/hours

Google Scholar

👨‍🔬 DH Al-Janan, Kriswanto, R Unggul, A Roziqin, RD Widodo, A Hangga, ...

📚 IOP Conference Series: Earth and Environmental Science 969 (1), 012018, 2022

2022

220

A numerical investigation of the sliding contact between a rigid spherical indenter and a rubber surface: The effect of sliding depth and surface roughness

Google Scholar

👨‍🔬 B Setiyana, J Jamari, R Ismail, DJ Schipper

📚 Jurnal Tribologi 33, 20-30, 2022

2022

221

Thermo-hydrodynamic analysis of multistep texture effect on the performance of journal bearings through acoustic and tribological characteristics

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, L Mario, J Jamari

📚 Journal of the Brazilian Society of Mechanical Sciences and Engineering 44 …, 2022

2022

222

The Effect of The Machining Process UHMWPE on The Wear Behaviour of Acetabular Cups for Hip Implants.

Google Scholar

👨‍🔬 WD Lestari, R Ismail, AT Danaryanto, J Jamari, AP Bayuseno, A Nugroho

📚 Journal of Mechanical Engineering (1823-5514) 19 (3), 2022

2022

223

Data transfer analysis of the homogeneous rough surface of a solid model into a CAE system with varying file data formats

Google Scholar

👨‍🔬 K Kartini, GA Sipayung, R Ismail, J Jamari, AP Bayuseno

📚 Cogent Engineering 9 (1), 2034265, 2022

2022

224

Reuse of wheat flour liquid waste for enzymatic hydrolysis to yield glucose-derived bioethanol

Google Scholar

👨‍🔬 NK Sari, IY Purbasari, PW Anggoro, J Jamari, AP Bayuseno

📚 Cogent Engineering 9 (1), 2101229, 2022

2022

225

Stress analysis bottom plate block B-03 on patrol ship construction using finite element methods

Google Scholar

👨‍🔬 SF Khristyson, AP Bayuseno, Jamari

📚 IOP Conference Series: Materials Science and Engineering 1034 (1), 012004, 2021

2021

226

Design of Fishing Vessel 5 GT for Traditional Fishing Community Activities

Google Scholar

👨‍🔬 SF Khristyson, AP Bayuseno, Jamari

📚 IOP Conference Series: Materials Science and Engineering 1096 (1), 012030, 2021

2021

227

Static Structural Analysis of the Sports Utility Vehicles Patriot Chassis

Google Scholar

👨‍🔬 W Aryadi, Kriswanto, A Roziqin, J Jamari

📚 IOP Conference Series: Earth and Environmental Science 700 (1), 012006, 2021

2021

228

Evaluation of extreme hip joint movement after total hip arthroplasty: A retrospective study

Google Scholar

👨‍🔬 IB Anwar, E van der Heide, J Jamari, E Saputra, A Santoso, D Adriansyah, ...

📚 Open Access Macedonian Journal of Medical Sciences 9, 1296-1300, 2021

2021

229

Study of low head turbine propellers axial flow for use of micro-hydropower plant (MHP) in Aceh, Indonesia

Google Scholar

👨‍🔬 Pribadyo, H Hadiyanto, J Jamari

📚 Journal of Physics: Conference Series 1524 (1), 012019, 2020

2020

230

The morphology aspect of CaCO3 scale impact of solenoid magnetic field in the various flow rate solution in the piping system

Google Scholar

👨‍🔬 S Sutomo, S Muryanto, W Mangestiono, J Jamari, AP Bayuseno

📚 Materials Today: Proceedings 13, 287-292, 2019

2019

231

The kinetic aspect of CaCO3 scale formation in the solenoid magnetic field in the various temperatures of solution in piping system

Google Scholar

👨‍🔬 S Sutomo, S Muryanto, W Mangestiono, J Jamari, AP Bayuseno

📚 Materials Today: Proceedings 13, 299-304, 2019

2019

232

Effect of eccentricity ratio on the hydrodynamic performance of journal bearing considering cavitation

Google Scholar

👨‍🔬 S Susilowati, F Hilmy, D Arfiandani, Muchammad, M Tauviqirrahman, ...

📚 AIP Conference Proceedings 2097 (1), 030068, 2019

2019

233

The effect of femoral head size on the cement mantle in the layered artificial hip joint

Google Scholar

👨‍🔬 IBA Gilar Pandu Annanto, Jamari, Eko Saputro, Athanasius Priharyoto Bayuseno ...

📚 American Institute of Physics 2114 (1), 060015, 2019

2019

234

Synthesis of Struvite using a Vertical Canted Reactor with Continuous Laminar Flow Process

Google Scholar

👨‍🔬 S Sutiyono, L Edahwati, S Muryanto, J Jamari, AP Bayuseno

📚 Journal of Physics: Conference Series 953 (1), 012244, 2018

2018

235

Rancang Bangun Alat Uji Keausan Berbasis Sistem Kontak Disc-On-Disc

Google Scholar

👨‍🔬 J Jamari, M Effendy, D Ardiansyah

📚 Turbo: Jurnal Program Studi Teknik Mesin 7 (1), 2018

2018

236

Comparison between non-Newtonian and Newtonian lubrication of journal bearing considering cavitation using CFD

Google Scholar

👨‍🔬 AW Pratomo, M Tauviqirrahman, M Muchammad, AP Bayuseno, J Jamari

📚 International Journal of Applied Engineering Research 12 (7), 1190-1193, 2017

2017

237

Redesigning the continuous vacuum sealer packaging machine to improve the processing speed

Google Scholar

👨‍🔬 JB Belo, SA Widyanto, J Jamari

📚 AIP Conference Proceedings 1788 (1), 030074, 2017

2017

238

Optimization of Manufacturing Process Parameters for the Product of ISO-Diabetes Patients with High Risk Classes

Google Scholar

👨‍🔬 PW Anggoro, B Bawono, J Wibowo, J Jamari, AP Bayuseno

📚 Advanced Science Letters 23 (12), 11910-11917, 2017

2017

239

Influence of Citric Acid on Struvite Precipitation

Google Scholar

👨‍🔬 DS Perwitasari, J Jamari, S Muryanto, AP Bayuseno

📚 Advanced Science Letters 23 (12), 12231-12234, 2017

2017

240

Modeling and optimization of CaCO3 precipitated from laminar-flow water in the presence of citric acid at an elevated temperature

Google Scholar

👨‍🔬 S Raharjo, S Muryanto, J Jamari, AP Bayuseno

📚 International Journal of Applied Engineering Research 11 (15), 8533-8539, 2016

2016

241

Finite element analysis of the impingement on the acetabular liner rim due to wear of the acetabular liner surface

Google Scholar

👨‍🔬 E Saputra, IB Anwar, R Ismail, J Jamari, E Van Der Heide

📚 AIP Conference Proceedings 1725 (1), 020074, 2016

2016

242

Estimation of appropriate lubricating film thickness in ceramic-on-ceramic hip prostheses

Google Scholar

👨‍🔬 M Tauviqirrahman, Muchammad, AP Bayuseno, R Ismail, E Saputra, ...

📚 AIP Conference Proceedings 1725 (1), 020090, 2016

2016

243

Tribological characteristic enhancement effects by polymer thickened oil in lubricated sliding contacts

Google Scholar

👨‍🔬 AW Pratomo, Muchammad, M Tauviqirrahman, Jamari, AP Bayuseno

📚 AIP Conference Proceedings 1725 (1), 020060, 2016

2016

244

Investigation on the elastic modulus of rubber-like materials by straight blade indentation using numerical analysis

Google Scholar

👨‍🔬 B Setiyana, FD Wicahyo, R Ismail, J Jamari, DJ Schipper

📚 Advanced Materials Research 1123, 55-58, 2015

2015

245

The effect of a hydrophobic coating material on friction in a micro-slider bearing: a numerical analysis

Google Scholar

👨‍🔬 M Tauviqirrahman, M Muchammad, R Ismail, J Jamari, DJ Schipper

📚 Advanced Materials Research 1123, 42-45, 2015

2015

246

Modeling of repeated rolling contact on rough surface: Surface topographical change

Google Scholar

👨‍🔬 R Ismail, E Saputra, M Tauviqirrahman, J Jamari, DJ Schipper

📚 Advanced Materials Research 896, 642-645, 2014

2014

247

Kaji eksperimental running-in pada kontak rolling-sliding pasangan material aluminium dengan baja S45C

Google Scholar

👨‍🔬 N Supriyana, P Londa, T Hidayat, J Jamari, S Nugroho

📚 Rotasi 15 (2), 18-23, 2013

2013

248

Pengaruh Sudut Pitch Propeler Terhadap Gaya Dorong Pada Controllable Pitch Propeler

Google Scholar

👨‍🔬 LY Sutadi

📚 Jurusan Teknik Mesin, Politeknik Negeri Semarang, 2012

2012

249

Analisa pengaruh kekasaran permukaan dan slip terhadap performansi pelumasan pada kontak sliding menggunakan metode volume hingga

Google Scholar

👨‍🔬 R Wijaya, J JAMARI

📚 Mechanical Engineering Departement of Diponegoro University, 2011

2011

250

Wall slip effects in a lubricated MEMS

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 International journal of energy machinery 4 (1), 13-22, 2011

2011

251

The Observation of the steady state phase on rolling contact using finite element analysis

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, Jamari, DJ Schipper

📚 AIP Conference Proceedings 1415 (1), 136-139, 2011

2011

252

Analisa kontak elastis antar hemispheres menggunakan metode Elemen Hingga

Google Scholar

👨‍🔬 A Yusra, I Haryanto, J Jamari

📚 Rotasi 10 (1), 1-5, 2008

2008

253

Criterion for surface contact deformation of metals

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 Tribotest 13 (1), 1-11, 2007

2007

254

Design, Fabrication, and Performance Testing of PMMA Interference Screws Prepared by 3D Printing Methods

Google Scholar

👨‍🔬 R Ismail, DF Fitriyana, AP Bayuseno, B Priwintoko, Y Subagyo, M Afrizal, ...

📚 Journal of Advanced Research in Applied Mechanics 128 (1), 86-95, 2025

2025

255

Analyzing spinopelvic parameter differences between standing and supine position

Google Scholar

👨‍🔬 A Prasetya, D Nabih, A Santoso, J Jamari, T Winarni

📚 Journal of Musculoskeletal Surgery and Research 9 (1), 11-27, 2025

2025

256

Microstructure examination of the biocorrosion susceptibility of mild steel coated with Zn and Zn-CaCO3 in a biodiesel environment

Google Scholar

👨‍🔬 VA Fardilah, I Alkian, YM Pusparizkita, C Aslan, M Tauviqirrahman, ...

📚 Next Materials 9, 101075, 2025

2025

257

Synthesizing calcium phosphate powder from bovine bone wastes using calcination and hydrothermal techniques to evaluate physicochemical properties and mineralogy speciation

Google Scholar

👨‍🔬 YM Pusparizkita, WW Schmahl, GDA Satria, R Ismail, J Jamari, ...

📚 Sustainable Chemistry for Climate Action, 100165, 2025

2025

258

The tribological performance identification of a tire tread block during friction contact: A numerical investigation

Google Scholar

👨‍🔬 B Setiyana, M Muchammad, M Tauviqirrahman, J Jamari, E Saputra

📚 vol 41, 81-92, 2024

2024

259

Hydrodynamic lubrication analysis of journal bearing considering cavitation, slip and thermal condition

Google Scholar

👨‍🔬 M Tauviqirrahman, M Wijaya, M Muchammad, P Paryanto, J Jamari

📚 J. Tribol 42, 1-20, 2024

2024

260

Microstructural properties and Adhesive Strength of 316L Stainless Steel Coated with Hydroxyapatite Derived from Mussel Shell Wastes via Flame Spray Deposition.

Google Scholar

👨‍🔬 M Amin, R Ismail, J Jamari, AP Bayuseno

📚 Jordan Journal of Mechanical & Industrial Engineering 18 (4), 2024

2024

261

The effect of carbon dioxide absorption using buton asphalt residue through carbonation on calcium carbonate precipitated efficiency

Google Scholar

👨‍🔬 M Ambarita, YM Pusparizkita, WW Schmahl, MDP Lamura, J Jamari, ...

📚 IOP Conference Series: Earth and Environmental Science 1268 (1), 012037, 2023

2023

262

Optimization of parameter for cutting condition of uhmwpe acetabular cup based on taguchi and desirability functions

Google Scholar

👨‍🔬 YAW Ninggar, PW Anggoro, B Bawono, DB Setyohad, M Tauviqirrahman, ...

📚 Cogent Engineering 10 (1), 2233247, 2023

2023

263

Analisis pembebanan tekanan pada rangka bawah surgery smart chair untuk dokter bedah laparoskopi dengan Solidworks

Google Scholar

👨‍🔬 ML Ridlwan, J Jamari, M Tauviqirrahman

📚 JURNAL TEKNIK MESIN 10 (2), 255-260, 2022

2022

264

Investigation of the influence of turbulence to tribological performance on smooth and multistep journal bearing with hydrodynamics simulation

Google Scholar

👨‍🔬 M Muchammad, DDP Wibowo, M Tauviqirrahman, B Setiyana, E Yohana, ...

📚 Frontiers in Mechanical Engineering 8, 946074, 2022

2022

265

Simulation and Optimization of Machining Time During Milling AISI P20 Steel

Google Scholar

👨‍🔬 W Sumbodo, Kriswanto, J Jamari

📚 IOP Conference Series: Earth and Environmental Science 700 (1), 012002, 2021

2021

266

Application of Computer-Aided Reverse Engineering System in the Design of Orthotic Boots for Clubfoot Patients

Google Scholar

👨‍🔬 APB P.K. Fergiawan, P.W. Anggoro, Rifky Ismail, J. Jamari

📚 Journal of Southwest Jiaotong University 56 (3), 405-418, 2021

2021

267

Mechanical Properties Identification of Vulcanized Rubber by Using Mooney-Rivlin Method

Google Scholar

👨‍🔬 B Setiyana, R Ismail, J Jamari, I Haryanto

📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021

2021

268

Computational Fluid Dynamic (CFD) Analysis of Propeller Turbine Runner Blades using various Blade Angles

Google Scholar

👨‍🔬 P Pribadyo, H Hadiyanto, J Jamari

📚 International Energy Journal 21 (3), 385-400, 2021

2021

269

Mechanical Properties of Polycarbonate Urethane (PCU) for Orthopedic Devices: Fabrication with Compression Molding

Google Scholar

👨‍🔬 WD Lestari, R Ismail, J Jamari, AP Bayuseno

📚 Recent Advances in Manufacturing Engineering and Processes: Proceedings of …, 2021

2021

270

Wear property of machined ultra high molecular weight polyethylene (UHMWPE) acetabular liner product with CNC milling

Google Scholar

👨‍🔬 WD Lestari, AT Danaryanto, A Nugroho, R Ismail, J Jamari, AP Bayuseno

📚 J Mech Eng Sci Technol 5, 110-122, 2021

2021

271

Contact mechanism between shaft, key, and crank in the sand sieving machine

Google Scholar

👨‍🔬 G Kurnia, B Yulianto, J Jamari, AP Bayuseno, M Tauviqirrahman

📚 AIP Conference Proceedings 2262 (1), 030015, 2020

2020

272

Optimization of Key Parameters in Struvite (K) Production for Phosphorus and Potassium Recovery Using a Batch Crystallizer

Google Scholar

👨‍🔬 S Muryanto

📚 Rasayan Journal of Chemistry, 2019

2019

273

Considering Social Aspects of Geothermal Project: The Case of Social Mapping of Geothermal Project on Mount Ungaran

Google Scholar

👨‍🔬 YZD Budi Setiyono, Agus Setyawan, Jamari, Heru Susanto, Eko Punto ...

📚 E3S Web of Conferences 125, 10009, 2019

2019

274

Redesigning of 4 (Four) Blades Propeller Installed in a Wooden Fishing Boat in a Ship Yard in Tegal, Central Java Province

Google Scholar

👨‍🔬 F Firdaus

📚 Marine Fisheries: Journal of Marine Fisheries Technology and Management, 2019

2019

275

The influence of wave frequency of solenoid magnetic field on CaCO3 scale formation in piping system

Google Scholar

👨‍🔬 Sutomo, S Muryanto, W Mangestiono, J Jamari, AP Bayuseno

📚 AIP Conference Proceedings 2097 (1), 030063, 2019

2019

276

Semi reverse innovative design of insole shoes orthotic for patient with club foot

Google Scholar

👨‍🔬 AA Anthony, PW Anggoro, T Yuniarto, B Bawono, AP Bayuseno, J Jamari

📚 2019 International Biomedical Instrumentation and Technology Conference …, 2019

2019

277

The effect of layer variation between liner and cement mantle on reducing cracks of PMMA material hip joints

Google Scholar

👨‍🔬 E Saputra, J Jamari, HA Lie, IB Anwar, R Ismail, M Tauviqirrahman, ...

📚 E3S Web of Conferences 73, 12013, 2018

2018

278

Optimized phosphate recovery through MAP precipitation in an air agitated column reactor

Google Scholar

👨‍🔬 L Edahwati, S Sutiyono, S Muryanto, J Jamari, AP Bayuseno

📚 Oriental Journal of Chemistry 34 (6), 3044, 2018

2018

279

Material Power Influence of Bucket Teeth Excavatoraisi 4140 Using Abrasive Wear Test With Ogoshi Universal High Speed

Google Scholar

👨‍🔬 SH Suryo, AP Bayuseno, J Jamari, H Kiswanto

📚 Global Journal of Advanced Engineering Technologies and Sciences 5, 54-64, 2018

2018

280

Cavitation modelling effect on pressure distribution of inclined lubricated contacts and textured surfaces using CFD

Google Scholar

👨‍🔬 N Almaida, MR Prasetyaji, MH Mufian, AR Hakim, M Tauviqirrahman, ...

📚 Journal Tribologi 22, 40-48, 2018

2018

281

Controlling of magnesium carbonate scale deposition on the piping system with laminar flow and in the presence of alumina

Google Scholar

👨‍🔬 S Raharjo, S Muryanto, J Jamari, AP Bayuseno

📚 AIP Conference Proceedings 1977 (1), 020064, 2018

2018

282

CFD analysis of texture depth effect on the performance of hydrodynamic lubricated bearing

Google Scholar

👨‍🔬 M Muchammad, F Hilmy, M Tauviqirrahman, J Jamari, DJ Schipper

📚 Journal of Physics: Conference Series 1090 (1), 012067, 2018

2018

283

Effect of texture shape on the hydrodynamic lubrication performance of the sliding textured contact: a numerical approach

Google Scholar

👨‍🔬 Susilowati, M Tauviqirrahman, J Jamari, AP Bayuseno

📚 Journal of Physics: Conference Series 1090 (1), 012027, 2018

2018

284

Influence of boundary slip layout on the hydrodynamic performance of partially textured journal bearing by CFD method

Google Scholar

👨‍🔬 RAAJ Mohammad Tauviqirrahman, Muchammad

📚 MATEC Web of Conferences 204, 04008, 2018

2018

285

Study the effect of wear rate on impingement failure of an acetabular liner surface based on finite element analysis

Google Scholar

👨‍🔬 E Saputra, IB Anwar, EVD Heide, R Ismail, J Jamari

📚 International Journal of Materials and Product Technology 55 (4), 340-353, 2017

2017

286

CFD analysis of artificial slippage and surface texturing in lubricated sliding contact considering cavitation

Google Scholar

👨‍🔬 AW Pratomo, RR Romadhon, Muchammad, M Tauviqirrahman, J Jamari, ...

📚 AIP Conference Proceedings 1788 (1), 030068, 2017

2017

287

Vector Analysis of Ionic Collision on CaCO3 Precipitation Based on Vibration Time History

Google Scholar

👨‍🔬 W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno

📚 IOP Conference Series: Materials Science and Engineering 202 (1), 012100, 2017

2017

288

The use of curve wizard method for generating rough surface in CAD model and data transferring analysis in CAE model

Google Scholar

👨‍🔬 GA Sipayung, E Saputra, R Ismail, J Jamari, AP Bayuseno

📚 2017 International Conference on Sustainable Information Engineering and …, 2017

2017

289

A temperature-mediated precipitation of struvite-family crystals in wastewater

Google Scholar

👨‍🔬 S Sutiyono, L Edahwati, S Muryanto, J Jamari, AP Bayuseno

📚 International Journal of ChemTech Research 9 (8), 486-494, 2016

2016

290

The effect of boundary slip and cavitation on hydrodynamic pressure generation in pocket bearings

Google Scholar

👨‍🔬 Muchammad, M Tauviqirrahman, AW Pratomo, J Jamari, DJ Schipper

📚 AIP Conference Proceedings 1725 (1), 020048, 2016

2016

291

Numerical Modelling of Surface Texturing of UHMWPE under Influence of Normal Load

Google Scholar

👨‍🔬 WD Lestari, FH Priyoga, J Jamari, AP Bayuseno

📚 Materials Science Forum 864, 8-12, 2016

2016

292

Perancangan Above Knee Prosthetic untuk Pasien Amputasi Kaki Di Atas Lutut

Google Scholar

👨‍🔬 J Jamari, AR Ismawan

📚 ROTASI 17 (2), 93-97, 2015

2015

293

Load Support Improvement on Superhydrophobic Surface in Lubricated-MEMS Using Numerical Investigation

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, J Jamari, DJ Schipper

📚 Advanced Materials Research 1123, 3-6, 2015

2015

294

Friction characteristics of liquid lubricated MEMS with deterministic boundary slippage

Google Scholar

👨‍🔬 M Tauviqirrahman, M Muchammad, R Ismail, J Jamari, DJ Schipper

📚 Jurnal Teknologi 66 (3), 75-80, 2014

2014

295

Computational analysis of the lubricated-sliding contact with artificial slip boundary

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 International journal of applied mathematics & statistics 35 (5), 67-80, 2013

2013

296

Perancangan Kursi Autisme untuk Mobil sebagai Alat Bantu Terapi Autisme

Google Scholar

👨‍🔬 GK Naufal, A Raswan, SH Suryo, J Jamari, I Haryanto

📚 ROTASI 15 (3), 19-24, 2013

2013

297

A test method to study the change in surface topography due to running‐in of a rolling contact

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 Lubrication Science 25 (5), 369-377, 2013

2013

298

Karakteristik AISI 304 Sebagai Material Friction Welding

Google Scholar

👨‍🔬 M Fawaid, R Ismail, S Nugroho

📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2012

2012

299

Optimasi Daerah Slip pada Permukaan Bertekstur pada Pelumasan MEMS (Micro Electro Mechanical Systems)

Google Scholar

👨‍🔬 A ZULFIKAR, J JAMARI

📚 Mechanical Engineering Departement of Diponegoro University, 2011

2011

300

Analisa Kontak Statis Permukaan Kasar Berbasis Elemen Hingga

Google Scholar

👨‍🔬 J Jamari

📚 Rotasi 13 (2), 13-17, 2011

2011

301

Perhitungan Keausan pada Kontak Rolling-Sliding

Google Scholar

👨‍🔬 E Saputra, R Ismail, M Tauviqirrahman, JJ Jamari

📚 Seminar Nasional Teknologi Informasi & Komunikasi Terapan (Semantik), 2011

2011

302

Effect of Boundary Slip on The Load Support in A Lubricated Sliding Contact

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 AIP Conference Proceedings 1415 (1), 51-54, 2011

2011

303

Finite Element Analysis of Sliding Contact of A Hard Cylinder on A Layered Elastic-Plastic Solid

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, J Jamari, DJ Schipper

📚 ICAME: Proceedings of International Conference on Advances Mechanical …, 2009

2009

304

Running-in as an Engineering Optimization

Google Scholar

👨‍🔬 J Jamari

📚 J@ ti Undip: Jurnal Teknik Industri 2 (1), 1-10, 2007

2007

305

Finite Element Analysis of Ti-6Al-4V Lattice Cubic Scaffolds for Mandibular Bone Implant Applications

Google Scholar

👨‍🔬 YKP Saleh, R Ismail, J Jamari, IN Jujur, S Suryadi, R Winarso, T Anggara

📚 Advances in Technology Innovation 10 (3), 283-295, 2025

2025

306

Exploring wear characteristics of AISI 1045 steel under variable disc rotation speeds: a tribological investigation

Google Scholar

👨‍🔬 IY Afif, J Jamari, E Saputra, S Saefudin, M Subri, M Amin

📚 Teknik 45 (1), 111-116, 2024

2024

307

The contact pressure analysis of different load and diameter ratio on hemispherical contact: biomechanical perspectives/M. Danny Pratama Lamura...[et al.]

Google Scholar

👨‍🔬 M Lamura, CB Achmad, MI Ammarullah, MI Maula, FA Husaini, ...

📚 Journal of Mechanical Engineering (JMechE) 13 (1), 55-73, 2024

2024

308

Process Parameter Optimization of Material Extrusion-Based Additive Manufacturing of 3D Printed-Biocomposite Interference Screw for Anterior Cruciate Ligament Reconstruction.

Google Scholar

👨‍🔬 LPS Hartanti, R Ismail, J Jamari, AP Bayuseno

📚 International Review of Mechanical Engineering 18 (5), 222, 2024

2024

309

Finite element analysis of irregular porous scaffold for bone tissue engineering

Google Scholar

👨‍🔬 R Winarso, R Ismail, PW Anggoro, J Jamari, AP Bayuseno

📚 Journal of Engineering and Applied Sciences 18 (6), 569-680, 2023

2023

310

Analysis of a radial permanent magnetic bearing for 1 MW horizontal axis wind turbine

Google Scholar

👨‍🔬 Kriswanto, NB Al Afkar, DH Al-Janan, Rusiyanto, J Jamari

📚 AIP Conference Proceedings 2609 (1), 030005, 2023

2023

311

CFD analysis of single open pocket and multi textured surface in hydrodynamic lubrication performance of thrust bearings

Google Scholar

👨‍🔬 Muchammad, M Tauviqirrahman, F Risqulah, B Setiyana, Jamari

📚 3rd Borobudur International Symposium on Science and Technology 2021 2706 (1 …, 2023

2023

312

2D finite element deformation investigation on CoCrMo-on-CoCrMo bearing of total hip implant under normal walking condition

Google Scholar

👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, ...

📚 ENGINEERING PHYSICS INTERNATIONAL CONFERENCE 2021–EPIC 2021 2580 (1), 050001, 2023

2023

313

Artificial Intelligence and Machine Learning in Prediction of Total Hip Arthroplasty Outcome: A Bibliographic Review

Google Scholar

👨‍🔬 I Yuniar Purbasari, A Priharyoto Bayuseno, RR Isnanto, T Indah Winarni, ...

📚 E3S Web of Conferences 448, 02054, 2023

2023

314

Numerical study of comparison of thrust bearing slip-no slip condition on acoustic performance

Google Scholar

👨‍🔬 I Syafaat, LR Sari, M Muchammad, M Tauviqirrahman, E Yohana, ...

📚 CFD Letters 15 (9), 1-17, 2023

2023

315

Use of hydroxyapatite powder derived from green mussel shell wastes for coating on AISI 316L

Google Scholar

👨‍🔬 M Amin, R Ismail, J Jamari, AP Bayuseno

📚 IOP Conference Series: Earth and Environmental Science 1268 (1), 012035, 2023

2023

316

Deep touch pressure for calming and comfort therapy from the perspective of contact mechanics: A review

Google Scholar

👨‍🔬 MI Maula, TI Winarni, MI Ammarullah, IY Afif, FA Husaini, MDP Lamura, ...

📚 Mechanical Engineering for Society and Industry 3 (3), 181-190, 2023

2023

317

2D finite element study of contact pressure on CoCrMo-on-CoCrMo total hip arthroplasty during peak loading based on body mass index

Google Scholar

👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, ...

📚 AIP Conference Proceedings 2578 (1), 070003, 2022

2022

318

Application of semi reverse innovative design for a boot's shoes orthotic for children with club foot

Google Scholar

👨‍🔬 APBMT P.W. Anggoro, Y.K. Nugrahanto, A.A. Anthony, Jamari

📚 IOP Conference Series: Materials Science and Engineering 1034, 012006, 2021

2021

319

Optimization Wire-EDM Parameters on Kerf Width and Involute Accuracy in Medium Carbon Stell using Grey Fuzzy Analytics and Fuzzy Logic

Google Scholar

👨‍🔬 R Yusron, J Jamari, R Hidayat

📚 2021 IEEE 7th Information Technology International Seminar (ITIS), 1-4, 2021

2021

320

Comparative study of estimated draft and righting arm stability for traditional fishing vessel under loading

Google Scholar

👨‍🔬 JJAPB S. F. Khristyson

📚 ARPN Journal of Engineering and Applied Sciences 16 (22), 2323-2329, 2021

2021

321

Use of 3D scanner and photogrammetry method for scanning foot deformities: CAD data analysis of morphology and shape of geometry

Google Scholar

👨‍🔬 AP Kartini, W., Ikhsan, M., Ismail, R., Jamari, J., Bayuseno

📚 ARPN Journal of Engineering and Applied Sciences 15 (13), 1419-1425, 2020

2020

322

Interaction of inertia and cavitation in textured hydrodynamically lubricated bearing in very low sliding velocity considering slip

Google Scholar

👨‍🔬 J Jamari, F Hilmy, M Muchammad, M Tauviqirrahman

📚 Journal of Physics: Conference Series 1517 (1), 012005, 2020

2020

323

A CFD study on the significance of the cavitation modeling in textured bearing analysis

Google Scholar

👨‍🔬 J Susilowati, Muchammad, Tauviqirrahman, M.

📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 71 (2 …, 2020

2020

324

Stress analysis of the friction contact on filled styrene butadiene rubber by a blade indentation: a numerical investigation

Google Scholar

👨‍🔬 B Setiyana, J Jamari, DJ Schipper

📚 Materials Today: Proceedings 13, 293-298, 2019

2019

325

Simulation load parameter on bipolar artificial hip joint using finite element method (FEM)

Google Scholar

👨‍🔬 RAN Al Hakim, A Edwan, J Jamari, R Ismail, A Bayuseno, ...

📚 Materials Today: Proceedings 13, 305-310, 2019

2019

326

Analisis Metode Elemen Hingga Artificial Hip Joint Saat Gerakan Salat

Google Scholar

👨‍🔬 A Candratama, Y Prasetyo, J Jamari, R Ismail, I Haryanto

📚 ROTASI 20 (4), 226-230, 2018

2018

327

The effect of supersaturation control strategy for phosphate recovery through precipitation of struvite in an air-agitated column reactor

Google Scholar

👨‍🔬 L Edahwati, S Sutiyono, S Muryanto, J Jamari, AP Bayuseno

📚 Rasayan Journal of Chemistry 11 (2), 904-914, 2018

2018

328

A Numerical Investigation of the Friction Contact of an Unfilled Styrene Butadiene Rubber by a Blade Sliding Indentation

Google Scholar

👨‍🔬 B Setiyana, M Khafidh, R Ismail, J Jamari, DJ Schipper

📚 Journal of Physics: Conference Series 1090 (1), 012078, 2018

2018

329

Numerical investigation on the elastic modulus of rubber-like materials by a rigid ball indentation technique

Google Scholar

👨‍🔬 B Setiyana, J Jamari, M Khafidh

📚 MATEC Web of Conferences 204, 07002, 2018

2018

330

The effect of textured surfaces on the hydrodynamic pressure generation in journal bearings

Google Scholar

👨‍🔬 FHJ Muchammad, Mohammad Tauviqirrahman, Rizqy Amanullah Akbar

📚 MATEC Web of Conferences 204, 04006, 2018

2018

331

Morphology and phases composition analysis of mixed calcium carbonate and calcium sulphate precipitates in flowing water of vibrated pipe

Google Scholar

👨‍🔬 W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno

📚 International Journal of Mechanical Engineering and Technology 9 (10), 1555-1568, 2018

2018

332

The beneficial effect of hydrophobic coating on the hydrodynamically lubricated bearing performance

Google Scholar

👨‍🔬 S Susilowati, M Tauviqirrahman, J Jamari, AP Bayuseno

📚 International Journal of Applied Engineering Research 12 (11), 2969-2972, 2017

2017

333

Effect of calcium additive on the crystallization of struvite

Google Scholar

👨‍🔬 DS Perwitasari, L Edahwati, S Sutiyono, N Karaman, J Jamari, ...

📚 MATEC Web of Conferences 58, 01007, 2016

2016

334

Fixation strength analysis of cup to bone material using finite element simulation

Google Scholar

👨‍🔬 IB Anwar, E Saputra, R Ismail, J Jamari, E Van Der Heide

📚 AIP Conference Proceedings 1725 (1), 020006, 2016

2016

335

Numerical investigation of pocketed slip slider bearing with non-Newtonian lubricant

Google Scholar

👨‍🔬 AW Pratomo, M Muchammad, M Tauviqirrahman, J Jamari, A Bayuseno

📚 Tribology-Materials, Surfaces & Interfaces 10 (2), 64-69, 2016

2016

336

Optimization of the parameters of the manufacturing process of the Product ISO_Diabetes for patients with high risk classes

Google Scholar

👨‍🔬 B BAWONO, PW ANGGORO, J Wibowo, J Jamari, AP Bayusena

2016

337

Numerical investigation of the plastic contact deformation between hemispheres: Variation of radii ratio and normal loads

Google Scholar

👨‍🔬 R Ismail, T Prasojo, M Tauviqirrahman, J Jamari, DJ Schipper

📚 Advanced Materials Research 1123, 16-19, 2015

2015

338

Analisis Metode Elemen Hingga pada Sendi Panggul Buatan Saat Digunakan untuk Menjalankan Ibadah Salat

Google Scholar

👨‍🔬 R Ismail, Y Umardani, IB Anwar, E Saputra, YAA Dhaneswara, A Haris, ...

2015

339

The effect of the wear rate on impingement failure confirming the relation between impingement failure and wear of the acetabular liner surface based on finite element simulation

Google Scholar

👨‍🔬 E Saputra, IB Anwar, R Ismail, J Jamari, E Van Der Heide

📚 Proceedings of Malaysian International Tribology Conference 2015, 54-55, 2015

2015

340

Investigasi Efisiensi Propeler Kapal Ikan Tradisional

Google Scholar

👨‍🔬 D Mulyana, J Jamari, R Ismail

📚 ROTASI 16 (4), 28-34, 2014

2014

341

Experimental testing of centrifugal pump: small and medium sized enterprise product

Google Scholar

👨‍🔬 R Ismail, F Paddiyatu, M Khafidh, S Nugroho, S Sugiyanto, J Jamari

📚 IOP Conference Series: Materials Science and Engineering 58 (1), 012008, 2014

2014

342

PERANCANGAN HUG MACHINE WRAP UNTUK ALAT TERAPI AUTISME

Google Scholar

👨‍🔬 SH Suryo, A Raswan, J Jamari, I Haryanto

📚 ROTASI 15 (3), 25-29, 2013

2013

343

Perancangan Mesin Remas (Squeeze Machine) Untuk Terapi Autisme

Google Scholar

👨‍🔬 A Raswan, SH Suryo, J Jamari, I Haryanto

📚 ROTASI 15 (3), 1-7, 2013

2013

344

Analisa Running-In Roda Gigi Transmisi Produk Usaha Kecil Menengah

Google Scholar

👨‍🔬 T Hidayat, N Supriyana, P Londa, J Jamari, JD Setiawan

📚 Rotasi 15 (2), 12-17, 2013

2013

345

Artificial Slip Surface: Potential Application in Lubricated MEMS

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 Tribology-Fundamentals and Advancements, 2013

2013

346

Wear prediction using GIWM (global incremental wear model) method

Google Scholar

👨‍🔬 J Jamari

📚 Rotasi 11 (4), 1-4, 2012

2012

347

Prediction of sliding wear of artificial rough surfaces

Google Scholar

👨‍🔬 I Syafa’at, B Setiyana, R Ismail, E Saputra, J Jamari, DJ Schipper

📚 Proceedings of International Conference on Chemical and Material Engineering …, 2012

2012

348

Pemanfaatan Mesin Pemanas Induksi Untuk Pengerasan Permukaan Roda Gigi Produk UKM

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, SS Sugiyanto, JJ Jamari, A Warsito, A Syakur

📚 Semantik 1 (1), 2011

2011

349

Prediksi Keausan Pin pada Pin-on-Disc Sliding Contact System Menggunakan Metode Elemen Hingga

Google Scholar

👨‍🔬 A ZAKARIYA, J JAMARI

📚 Mechanical Engineering Departement of Diponegoro University, 2010

2010

350

Surface topographical change due to sliding contact

Google Scholar

👨‍🔬 J Jamari, E Saputra, R Ismail, M Tauviqirrahman, DJ Schipper

📚 National Seminar-Science and Technology, Faculty of Engineering, University …, 2010

2010

351

An Elliptic Elastic-Plastic Asperity Micro-Contact Model

Google Scholar

👨‍🔬 J Jamari

📚 ROTASI 8 (3), 1-5, 2006

2006

352

Dimensional Assessment and Error Analysis of 3D CAD Models Manufactured with Bound Metal Deposition.

Google Scholar

👨‍🔬 YKP Saleh, R Ismail, J Jamari, IN Jujur, PA Budiantoro, S Ramayanti, ...

📚 International Journal of Engineering & Technology Innovation 16 (1), 1, 2026

2026

353

Finite Element‐Based Wear Prediction Using Archard's Law for Single Mobility Bearing of Total Hip Prosthesis During Walking: A Literature Review

Google Scholar

👨‍🔬 MI Ammarullah, AA Yusuf, MI Maula, MDP Lamura, B Setiyana, ...

📚 Engineering Reports 8 (2), e70628, 2026

2026

354

Elastic–plastic contact between two hemispheres: a comparison study of deformable and rigid bases

Google Scholar

👨‍🔬 MDP Lamura, HA Ginting, MI Maula, M Ambarita, T Hidayat, AP Bayuseno, ...

📚 Journal of King Saud University–Engineering Sciences 38 (3), 19, 2026

2026

355

Phosphorous recovery from laundry effluents as Struvite and Struvite-K: A batch crystallization study based on a three-factor central composite design

Google Scholar

👨‍🔬 DS Perwitasari, WW Schmahl, YM Pusparizkita, J Jamari, AP Bayuseno

📚 Next Materials 11, 101965, 2026

2026

356

Analisis Grid Independence pada Simulasi Finite Element Method Geometri Lumbar 4: Keseimbangan antara Akurasi dan Efisiensi Komputasi

Google Scholar

👨‍🔬 HA Wicaksono, MDP Lamura, MI Maula, TI Winarni

📚 ROTASI 27 (1), 52-56, 2025

2025

357

Hydroxyapatite-amorphous calcium phosphate growth on a stainless-steel surface via flame spray deposited hydroxyapatite powders

Google Scholar

👨‍🔬 M Amin, YM Pusparizkita, R Ismail, J Jamari, AP Bayuseno

📚 Materials Letters, 139385, 2025

2025

358

Influence of radial clearance on Tresca stress in Al2O2-on-Al2O3 bearings for total hip prosthesis evaluated using finite element analysis

Google Scholar

👨‍🔬 MI Ammarullah, AA Yusuf, M Kozin, MI Maula, MDP Lamura, ...

📚 Scientific Reports 15 (1), 33091, 2025

2025

359

Chemical Synthesis of Calcium Phosphates Derived from Crab Shells and Phosphoric Acid: An Examination of Crystal Structure and Biodegradability Features

Google Scholar

👨‍🔬 V Naubnome, AM Ernandara, WW Schmahl, YM Pusparizkita, R Ismail, ...

📚 ChemistrySelect 10 (37), e04172, 2025

2025

360

Utilization of biogenic waste as a valuable calcium resource in the hydrothermal synthesis of calcium-orthophosphate nanomaterial

Google Scholar

👨‍🔬 AP Bayuseno, R Ismail, J Jamari, S Muryanto

📚 Green and Sustainable Approaches Using Wastes for the Production of …, 2024

2024

361

Additive manufacturing as smart manufacturing system for fabrication of interference screw

Google Scholar

👨‍🔬 LPS Hartanti, PW Anggoro, R Ismail, J Jamari, AP Bayuseno

📚 Journal of Advanced Mechanical Design, Systems, and Manufacturing 18 (7 …, 2024

2024

362

Stress Analysis on the Base of Surgeon’s Chair: Frame and Truss Perspective

Google Scholar

👨‍🔬 G Santoso, S Sugiharto, T Supriyono, MI Ammarullah, MS Permana, ...

📚 Lecture Notes in Mechanical Engineering 307879, 133-138, 2024

2024

363

Numerical study on mechanical properties of cubic porous bone scaffold: Effect of unit cell type

Google Scholar

👨‍🔬 R Winarso, R Ismail, PW Anggoro, J Jamari, AP Bayuseno

📚 AIP Conference Proceedings 3074 (1), 020001, 2024

2024

364

Mild-Carbon Steels As a Storage Tank Material for Biodiesel Product: a Corrosion Assessment

Google Scholar

👨‍🔬 VA Fardilah, YM Pusparizkita, M Tauviqirrahman, J Jamari, AP Bayuseno

📚 Rasayan Journal of Chemistry 17 (3), 767-775, 2024

2024

365

REKONSTRUKSI dan SIMULASI ELEMEN HINGGA PADA VERTEBRA LUMBALIS 1 SAMPAI SACRALIS 1 DENGAN KONDISI PEMBEBANAN BERBEDA

Google Scholar

👨‍🔬 HCP Setiadi, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 11 (1), 126-131, 2023

2023

366

ANALISIS VON MISES STRESS HIP JOINT PADA INDIVIDU USIA LANJUT MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 M Naufal, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 11 (1), 156-159, 2023

2023

367

Von Mises stress analysis of CoCrMo-on-CoCrMo hip prosthesis based on body mass index: 2D FEM estimation

Google Scholar

👨‍🔬 MI Ammarullah, IY Afif, MI Maula, M Tauviqirrahman, AP Bayuseno, ...

📚 2ND INTERNATIONAL CONFERENCE ON ADVANCED INFORMATION SCIENTIFIC DEVELOPMENT …, 2023

2023

368

Inhibition of Barium Sulfat Crystal Formation in a Batch Method Crystallizer in the Presence of Cu and Zn

Google Scholar

👨‍🔬 N Karaman, HG Wibowo, U Aqil, J Jamari, AP Bayuseno, L Suprianti

📚 International Journal of Science, Technology & Management 4 (3), 697-701, 2023

2023

369

Effect of 3D printing process parameters on flexural strength of mixing PLA and PCL polymer

Google Scholar

👨‍🔬 DP Putra, Romli, AT Prakoso, NY Mahendra, MI Ammarullah, M Yanis, ...

📚 TOWARD ADAPTIVE RESEARCH AND TECHNOLOGY DEVELOPMENT FOR FUTURE LIFE 2689 (1 …, 2023

2023

370

Analisis Pressure Distribution Bed Decubitus Menggunakan Metode Elemen Hingga

Google Scholar

👨‍🔬 S Adrianus, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 11 (3), 368-373, 2023

2023

371

Phosphate removal from wastewater for the manufacture of struvite fertilizer.

Google Scholar

👨‍🔬 DS Perwitasari, NA Fauziyah, PS Tola, S Muryanto, J Jamari, ...

📚 Technium 16, 2023

2023

372

Design And Prototyping Of Electric Carrying Tractors

Google Scholar

👨‍🔬 F Rizayana, W Kwintarini, MR Hermawan, AP Bayuseno, J Jamari

📚 Rotor 16 (2), 26-30, 2023

2023

373

Thermo-hydrodynamic Analysis of Multistep Journal Bearing using Computational Fluid Dynamics Simulation

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, ADD Ega, B Setiyana, J Jamari

📚 CFD Letters 15 (12), 117-134, 2023

2023

374

Hydrothermal Production of Nanoparticles, Thermostable Hydroxyapatite with Varying Ph and Temperatures

Google Scholar

👨‍🔬 A Prihanto, S Muryanto, R Ismail, J Jamari, AP Bayuseno

📚 Thermostable Hydroxyapatite with Varying Ph and Temperatures, 2022

2022

375

Computer-aided design for analyzing the influence of anteroposterior translation on artificial knee joint stability

Google Scholar

👨‍🔬 D Darmanto, R Novriansyah, R Ismail, J Jamari, AP Bayuseno, ...

📚 Materials today Proceedings, 2022

2022

376

ANALISIS KEKUATAN STRUKTUR RANGKA DASAR SAFETY SURGICAL CHAIR YANG DIGUNAKAN OLEH DOKTER BEDAH LAPAROSKOPI

Google Scholar

👨‍🔬 WP Hutagaol, J Jamari, M Tauviqirrahman

📚 Jurnal Teknik Mesin 10 (3), 375-384, 2022

2022

377

A Study of The Effect of Model Geometry and Body Mass Index on The Elastohydrodynamic Lubrication Performance of Metal-on-Metal Hip Joints

Google Scholar

👨‍🔬 HB Basri, TSR Doni, ATP Prakoso, MIA Imam, JJ Jamari

📚 Journal of Medical Device Technology 1 (1), 4-9, 2022

2022

378

Evaluation of Extreme Hip Joint Movement after Total Hip Arthroplasty: A Retrospective Study. Open Access Maced J Med Sci. 2021 Oct 31; 9 (B): 1296-1300

Google Scholar

👨‍🔬 IB Anwar, E van der Heide, J Jamari, E Saputra, A Santoso, D Adriansyah, ...

2021

379

Analisis Pengaruh Tekstur Permukaan Berupa Square Dimple Pada Komponen Femoral Head Terhadap Performa Artificial Hip Joint Pada Gerakan Membungkuk Dengan Metode Two-Way Fluid …

Google Scholar

👨‍🔬 GA Kalbuadhi, M Tauviqirrahman, J Jamari

📚 Jurnal Teknik Mesin 9 (3), 449-452, 2021

2021

380

Validity of Navier-Stokes Equation in Single-Textured Thrust Bearing Considering Reynolds Number and Cell Aspect Ratio

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, H Nurahman, J Jamari

📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021

2021

381

Analisa Patah Cover Body Sepeda Motor Menggunakan Simulasi Metode Elemen Hingga

Google Scholar

👨‍🔬 E Saputra, R Ismail, J Jamari

📚 Jurnal Rekayasa Mesin 16 (2), 265-271, 2021

2021

382

Study on Wear Debris Characterization of Polycarbonate Urethane (PCU) as a Bearing of Artificial Hip Joint

Google Scholar

👨‍🔬 WD Lestari, R Ismail, J Jamari, AP Bayuseno

📚 Journal of Physics: Conference Series 2065 (1), 012004, 2021

2021

383

Risk of Impingement on Polyethylene Liner of Total Hip Arthroplasty Prosthesis during Muslim Prayer (Salat) Activity. Open Access Maced J Med Sci. 2020 Jun 10; 8 (F): 65-69

Google Scholar

👨‍🔬 IB Anwar, E Saputra, R Ismail, J Jamari, E van der Heide

2020

384

Effect of Spacing on Flow Field Characteristic of Tube Artificial Reefs with Parallel Formation by CFD

Google Scholar

👨‍🔬 JM Mohammad Tauviqirrahman , Sugiyanto , Eflita Yohana , Mulyadi

📚 Journal of Engineering and Applied Sciences 14 (3), 913-919, 2019

2019

385

Improvement of wear resistant of railway wheel by using graphite in various speeds based on disc-on-disc contact system

Google Scholar

👨‍🔬 J Junaidi, Joko Suparno, Dimas Halim Ardiansyah, Marwan Effendy

📚 American Institute of Physics 2114 (1), 040005, 2019

2019

386

The Influence of Various Vibration Frequency on Barium Sulfate Scale Formation Of Vibrated Piping System In The Presence Citric Acid

Google Scholar

👨‍🔬 N Karaman, W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno

📚 Journal of Physics: Conference Series 953 (1), 012247, 2018

2018

387

A numerical investigation of mechanical response of unfilled styrene butadiene rubber by static straight blade indentation/B. Setiyana...[et al.]

Google Scholar

👨‍🔬 S DJ

📚 Journal of Mechanical Engineering (JMechE), 43-51, 2018

2018

388

Initial Response of Human Bone Marrow–Derived Stem Cells after Contact with Ultrahigh-Molecular-Weight Polyethylene (UHMWPE) Material: An: In Vitro: Study on Cell Viability and …

Google Scholar

👨‍🔬 IB Anwar, A Santoso, E Saputra, R Ismail, J Jamari, E Van der Heide

📚 Journal of Pharmacy and Bioallied Sciences 10 (1), 43-47, 2018

2018

389

Numerical simulation of artificial hip joint motion based on human age factor

Google Scholar

👨‍🔬 S Ramdhani, E Saputra, J Jamari

📚 Journal of Physics: Conference Series 1025 (1), 012093, 2018

2018

390

CFD analysis of partial slip effect on the performance of hydrodynamic lubricated journal bearings

Google Scholar

👨‍🔬 WAWJ Muchammad, Bambang Yunianto, Mohammad Tauviqirrahman

📚 MATEC Web of Conferences 204, 04014, 2018

2018

391

Scaling Mitigation of Barium Sulfate in Vibrated Piping Systems Using Ethylene Dyaminetetraacetic Acid

Google Scholar

👨‍🔬 N Karaman, W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno

📚 Advanced Science Letters 24 (12), 9726-9728, 2018

2018

392

Modeling and Optimization of Struvite Crystal Scaling Using Experimental Design Methodology For Maleic Acid

Google Scholar

👨‍🔬 DS Perwitasari, AP Bayuseno, J Jamari, S Muryanto

📚 International Conference on Science and Technology (ICST 2018), 253-258, 2018

2018

393

Investigation of optimal proses parameters in CNC milling of insole shoe orthotic using taguchi-fuzzy approach

Google Scholar

👨‍🔬 B BAWONO, PW ANGGORO, M Tauviqirrahman, J Jamari, AP Bayusena

📚 International Journal of Applied Engineering Research 12 (19), 8723-8726, 2017

2017

394

Pemodelan Metode Elemen Hingga Kontak Femoral Head dengan Acetabular Liner pada Sendi Panggul Buatan dengan Variasi Diameter Celah pada Acetabular Liner

Google Scholar

👨‍🔬 R Ismail, S Sugiyanto, H Kristianto, E Saputra, J Jamari

📚 ROTASI 19 (3), 139-146, 2017

2017

395

The effect of load and thickness variation on stress analysis of monocoque frame of electric city car using FEM

Google Scholar

👨‍🔬 A Makhrojan, A Suprihadi, SS Budi, J Jamari, R Ismail

📚 AIP Conference Proceedings 1788 (1), 030077, 2017

2017

396

Use of Upflow Fluidized Bed Reactor (FBR) for Recovery Phosphorus from Waste-Water Through Struvite Precipitation

Google Scholar

👨‍🔬 L Edahwati, S Muryanto, J Jamari, AP Bayuseno

📚 Advanced Science Letters 23 (12), 12263-12267, 2017

2017

397

Determining Optimal Toolpath Strategy in the Manufacture of Insole Shoe Orthotic Made from Eva Foam Rubber for Diabetes Patients

Google Scholar

👨‍🔬 B Bawono, PW Anggoro, AA Anthony, J Jamari, AP Bayuseno

📚 Advanced Science Letters 23 (12), 11902-11909, 2017

2017

398

Comparison of the Effect of Texturing Modes and Boundary Slip on Tribological Performance of Journal Bearing

Google Scholar

👨‍🔬 J Mohammad Tauviqirrahman, Bayu Kurniawan, Rifky Ismail, Susilowati

📚 Advanced Science Letters 23 (12), 11918-11921, 2017

2017

399

Autist mobile seat’s frame strength simulation used in a car

Google Scholar

👨‍🔬 SH Suryo, J Jamari, GK Naufal, R Ismail, AP Bayuseno, DR Desiningrum

📚 AIP Conference Proceedings 1725 (1), 020086, 2016

2016

400

Finite element modelling of the insole shoe orthotic for foot deformities

Google Scholar

👨‍🔬 PW ANGGORO, B BAWONO, PP Permono, J Jamari, AP Bayusena

2016

401

Running-in of an artificial rough rolling-sliding contact using Finite Element Analysis

Google Scholar

👨‍🔬 R Ismail, E Saputra, J Jamari, D Schipper

📚 Proceedings of Malaysian International Tribology Conference 2015, 74-75, 2015

2015

402

Effect of geometry on the plastic contact between two hemispheres

Google Scholar

👨‍🔬 J Jamari, E Saputra, R Ismail, M Tauviqirrahman, DJ Schipper

📚 Proceedings of Malaysian International Tribology Conference 2015, 76-77, 2015

2015

403

Study on the biocompatibility and wear of stainless steel 316L and UHMWPE materials

Google Scholar

👨‍🔬 IB Anwar, E Saputra, R Ismail, J Jamari, E Van der Heide

📚 Proceedings of Malaysian International Tribology Conference 2015, 56-57, 2015

2015

404

Hydrodynamic lubrication of surface textured lubricated contacts with boundary slip using CFD

Google Scholar

👨‍🔬 M Tauviqirrahman, AW Muchammad, J Jamari, DJ Schipper

📚 Proceedings of Malaysian International Tribology Conference 2015, 157-158, 2015

2015

405

Investigasi Geometri Dan Performa Hidrodinamis Propeler Produksi Ukm Pada Kondisi Open Water

Google Scholar

👨‍🔬 F Firdaus, J Jamari, R Ismail

📚 ROTASI 16 (4), 35-40, 2014

2014

406

Analisa Karakteristik Minyak Pelumas Jenis 15W-40 Produk Dalam Negeri Menggunakan Tribometer Pin-On-Ring

Google Scholar

👨‍🔬 M Khafidh, J Jamari

📚 Prosiding Semnastek, 2014

2014

407

Pengaruh Pemodelan Kavitasi untuk Analisis Kontak Terlubrikasi dengan Slip Dinding

Google Scholar

👨‍🔬 KR Widodo, M Tauviqirrahman, J Jamari

📚 Semantik 1 (1), 2011

2011

408

Tribology-Based Energy Efficiency

Google Scholar

👨‍🔬 D Jamari, R Ismail, M Tauviqirrachman, SS Sugiyanto

📚 Jurnal Tribology, 2011

2011

409

Modeling of Surface Hardening Layer on Transmission Gear

Google Scholar

👨‍🔬 J Jamari, R Ismail, M Tauviqirrahman

📚 ICE-SEAM 2011: Proceeding of International Conference and Exhibition …, 2011

2011

410

Analisa Parameter Kontak Pada Sliding Contact Antar Ellipsoid Dengan Variasi Arah Sliding Menggunakan Metode Elemen Hingga

Google Scholar

👨‍🔬 AB NUGRAHA, J JAMARI

📚 Mechanical Engineering Departement of Diponegoro University, 2010

2010

411

Pengukuran Deformasi Plastis Pada Kontak Antar Hemisphere

Google Scholar

👨‍🔬 BS Hardjuno, JD Setiawan, R Ismail, J Jamari

📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2010

2010

412

Study of rolling contact of a cylinder on a rough surface with finite element analysis

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, DJ Schipper

📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2010

2010

413

Elastic-plastic deformation of a rough surface due to repeated rolling contact

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, J Jamari, DJ Schipper

📚 5th Kentingan Physics Forum (KPF)-The International Conference on Physics …, 2010

2010

414

The application of updating geometry model in finite element analysis for predicting the running-in wear on sliding contact

Google Scholar

👨‍🔬 J Jamari, E Saputra, R Ismail, M Tauviqirrahman, DJ Schipper

📚 8th ASEAN ANSYS Conference 2010, Singapore: Smart Engineering For A …, 2010

2010

415

New Material Development for Surface Layer and Surface Technology in Tribology Science to Improve Energy Efficiency

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, Jamari, DJ Schipper

📚 AIP Conference Proceedings 1169 (1), 214-221, 2009

2009

416

Closure to “Discussion of ‘Experimental Investigation of Fully Plastic Contact of a Sphere Against a Hard Flat’”(2007, ASME J. Tribol., 129, p. 700)

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

2007

417

Matching and stitching for surface identification

Google Scholar

👨‍🔬 J Jamari

📚 ROTASI 8 (4), 1-4, 2006

2006

418

Rancang Bangun Alat Uji Running-In Untuk Sistem Kontak Two-Disc

Google Scholar

👨‍🔬 P Londa, T Hidayat, N Supriyana, J Jamari, S Nugroho

📚 ROTASI 15 (2), 24-30, 0

419

Computational prediction of running-in wear in hard-on-hard dual mobility total hip prostheses during the gait cycle

Google Scholar

👨‍🔬 MI Ammarullah, Y Lim, M Kozin, MDP Lamura, B Setiyana, ...

📚 Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2026

2026

420

Sound absorption as a basis for noise reduction studies: Bibliometric analysis

Google Scholar

👨‍🔬 TB Atmojo, MA Budiharjo, J Jamari, S Rachmawati, S Rinawati, ...

📚 AIMS Environmental Science 13 (1), 23-38, 2026

2026

421

Corrosion resistance of stainless steel in fuel ballast systems exposed to a mixture of biodiesel and artificial seawater

Google Scholar

👨‍🔬 YM Pusparizkita, VA Fardilah, A Harimawan, C Aslan, J Jamari, ...

📚 Next Research, 101359, 2026

2026

422

Von Mises stress analyses using finite element model in two patients with chronic low back pain.

Google Scholar

👨‍🔬 AIP Prasetya, TI Winarni, J Jamari, A Syahrom

📚 Medicinski Glasnik 23 (1), 173, 2026

2026

423

Numerical investigation of fluid pressure on elastic-plastic contact between a hemisphere and a rigid flat surface

Google Scholar

👨‍🔬 J Jamari, MDP Lamura, AWB Santosa, MI Ammarullah, AP Bayuseno

📚 Mechanics Research Communications, 104663, 2026

2026

424

Soxhlet extraction of Indonesian carbonate asphalt as a sustainable source for bitumen and precipitated calcium carbonate feedstock

Google Scholar

👨‍🔬 M Ambarita, E Fernando, K Panjaitan, CFG Jawak, WW Schmahl, ...

📚 Progress in Engineering Science 3 (1), 100202, 2026

2026

425

Novel Advances and Approaches in Hydroxyapatite-Based Coating on Metallic Biomaterials

Google Scholar

👨‍🔬 M Amin, YM Pusparizkita, WW Schmahl, R Ismail, J Jamari, AP Bayuseno

📚 Journal of Alloys and Compounds Communications, 100187, 2026

2026

426

Carbonizing solid waste generated from the extraction of Indonesian carbonate asphalt to produce precipitated calcium carbonate filler for use in polymer composites

Google Scholar

👨‍🔬 M Ambarita, F Adam, YK Sinaga, YM Pusparizkita, WW Schmahl, R Ismail, ...

📚 Next Sustainability 7, 100346, 2026

2026

427

An experimental and 2D axisymmetric simulation approach for analysing the impact resistance of Zn-ZnO-CaCO₃ coating on AISI 1010 steel

Google Scholar

👨‍🔬 NS Dera, YM Pusparizkita, SMP Hidayat, VA Fardilah, MDP Lamura, ...

📚 Next Materials 12, 102224, 2026

2026

428

Microwave-assisted synthesis of calcium phosphate powders from thermally treated green mussel shells and solutions containing HPO₄³⁻

Google Scholar

👨‍🔬 YM Pusparizkita, A Prihanto, WW Schmahl, RA Faizal, R Ismail, J Jamari, ...

📚 Next Materials 12, 102503, 2026

2026

429

Analisis Perbandingan Kontak Mekanik pada Permukaan Sinusoidal dengan Variasi Kondisi Pelumasan Menggunakan Metode Elemen Hingga

Google Scholar

👨‍🔬 S Anwar, MDP Lamura, J Jamari, AP Bayuseno

📚 ROTASI 27 (1), 1-7, 2025

2025

430

Understanding Hip Contact Stress Based on Types of Physical Activity: A Systematic Review

Google Scholar

👨‍🔬 AIP Prasetya, MI Ammarullah, TI Winarni, A Pramono, J Jamari, T Kamarul, ...

📚 Health Science Reports 8 (1), e70305, 2025

2025

431

AGRICULTURAL EQUIPMENT FOR FARMING ON TERRACE, NARROWING, AND HARD-TO-REACH LAND: A REVIEW

Google Scholar

👨‍🔬 F Rizayana, R Hermawan, S Sugiharto, J Jamari, AP Bayuseno

📚 ARPN Journal of Engineering and Applied Sciences 20 (17), 1489-1500, 2025

2025

432

A Scientometric Analysis on the Relevance of Sound Insulation Literature as a Knowledge Base in Noise Control

Google Scholar

👨‍🔬 TB Atmojo, MA Budiharjo, J Jamari, CH Wibowo, FM Majid

📚 E3S Web of Conferences 674, 03002, 2025

2025

433

PENGARUH VARIASI TEKANAN TERHADAP PENYEMPITAN PEMBULUH DARAH DAN IMPLIKASINYA PADA PEMBENTUKAN ULKUS DEKUBITUS

Google Scholar

👨‍🔬 BP Mahardika, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 13 (1), 15-22, 2025

2025

434

The effect of height variations sinusoidal against rigid flat on contact mechanics

Google Scholar

👨‍🔬 S Anwar, MDP Lamura, AP Bayuseno, J Jamari

📚 Industrial Lubrication and Tribology, 2025

2025

435

Assisted hydrothermal synthesis of green mussel shell-derived hydroxyapatite for use in filler polymer-based composites

Google Scholar

👨‍🔬 V Naubnome, AP Bayuseno, FA Wicaksono, A Prihanto, VA Fardilah, ...

📚 Journal of Physics: Conference Series 2972 (1), 012053, 2025

2025

436

Optimization of the Additive Manufacturing Parameters of Polylactic

Google Scholar

👨‍🔬 LPS Hartanti, B Bawono, T Yuniarto, J Mulyono, JJ Nauolim, R Ismail, ...

📚 Proceedings of 8th ASRES International Conference on Intelligent …, 2025

2025

437

ANALISIS DISTRIBUSI TEKANAN PADA KULIT PASIEN TERBARING PADA KASUR UDARA DENGAN PENAMBAHAN LAPISAN LAYER UNTUK PENCEGAHAN ULKUS DEKUBITUS MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 RA Landarto, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 13 (2), 1-6, 2025

2025

438

ANALISIS VON MISES STRESS PADA TULANG L1 HINGGA L2 DENGAN KONDISI PEMBEBANAN MULTIAXIAL MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 M Rafli, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 13 (2), 47-50, 2025

2025

439

Stress distribution on the L1/L2 endplates under multiaxial loads: A finite element study

Google Scholar

👨‍🔬 HA Wicaksono, M Rafli, M Bilal, MDP Lamura, MI Maula, AP Bayuseno, ...

📚 Mechanical Engineering for Society and Industry 5 (1), 182-189, 2025

2025

440

PRODUKSI PRECIPITATED CALCIUM CARBONATE (PCC) MORFOLOGI KALSIT DARI LIMBAH ASBUTON MENGGUNAKAN PELARUT ASAM ASETAT (CH3COOH) DAN AMONIUM BIKARBONAT (NH4HCO3) MELALUI METODE …

Google Scholar

👨‍🔬 C Ginting, AP Bayuseno, J Jamari

📚 JURNAL TEKNIK MESIN 13 (3), 35-40, 2025

2025

441

ANALISIS VON MISES STRESS PADA TULANG L4 HINGGA L5 DENGAN MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 D Bungaran, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 13 (3), 71-74, 2025

2025

442

ANALISIS PENGARUH LAPISAN SELULOSA PADA MODEL KASUR ANGIN ANTI DEKUBITUS TERHADAP DISTRIBUSI TEKANAN TUBUH BERBARING MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 M Rizqy, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 13 (3), 85-90, 2025

2025

443

ANALISIS DISTRIBUSI TEGANGAN VON MISES PADA VERTEBRA LUMBALIS 4 HINGGA SACRALIS 1 TERHADAP VARIASI SUDUT FLEKSI DENGAN METODE NUMERIK

Google Scholar

👨‍🔬 K Febriyanto, O Kurdi, J Jamari

📚 JURNAL TEKNIK MESIN 13 (3), 81-84, 2025

2025

444

OPTIMALISASI EKSTRAKSI ASPAL BUTON MENGGUNAKAN METODE SOXHLET DENGAN PENGARUH PELARUT N-HEXANE, TRICHLORETHYLENE DAN TOLUENE SEBAGAI PEMANFAATAN PEMBUATAN PRECIPITATED CALCIUM …

Google Scholar

👨‍🔬 E Fernando, AP Bayuseno, J Jamari

📚 JURNAL TEKNIK MESIN 13 (3), 105-108, 2025

2025

445

OPTIMALISASI DESAIN MATRAS UNTUK REDUKSI RISIKO PRESSURE ULCERS MELALUI PERBANDINGAN DISTRIBUSI TEKANAN ANTARA MATRAS BERPROFIL DIAMOND DAN MATRAS MEDIS KONVENSIONAL …

Google Scholar

👨‍🔬 S Wijaya, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 13 (3), 231-236, 2025

2025

446

ANALISIS PENGARUH GAP GEOMETRI BALOK PADA DESAIN SURFACE KASUR FOAM ANTI DECUBITUS TERHADAP DISTRIBUSI TEGANGAN VON MISES MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 HA Hasim, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 13 (3), 285-290, 2025

2025

447

ANALISIS PENGARUH PENAMBAHAN PRECIPITATED CALCIUM CARBONATE (PCC) HASIL EKSTRAKSI ASPAL BUTON DAN ZINC SEBAGAI MATERIAL PELAPIS SPESIMEN LOW-CARBON STEEL AISI 1018 PADA TANGKI …

Google Scholar

👨‍🔬 K Panjaitan, AP Bayuseno, J Jamari

📚 JURNAL TEKNIK MESIN 13 (3), 445-452, 2025

2025

448

OPTIMASI KETEBALAN COATING ZN-ZNO-CACO₃ PADA BAJA AISI 1010 TERHADAP KETAHANAN IMPAK DENGAN PENDEKATAN EKSPERIMENTAL DAN SIMULASI 2D AXISYMMETRIC

Google Scholar

👨‍🔬 SMP Hidayat, AP Bayuseno, J Jamari

📚 JURNAL TEKNIK MESIN 13 (3), 389-390, 2025

2025

449

ANALISIS BIOMEKANIKA MATA MENGGUNAKAN METODE ELEMEN HINGGA PENGARUH VARIASI INDEKS MASSA TUBUH DAN KEKAKUAN LENSA TERHADAP TEKANAN INTRAOKULAR

Google Scholar

👨‍🔬 TS Budiono, J Jamari, TI Winarni, MDP Lamura

📚 JURNAL TEKNIK MESIN 13 (3), 437-444, 2025

2025

450

Prototype and macroscopic examination of implant dental crown made by 3-axis CNC machine

Google Scholar

👨‍🔬 Kriswanto, N Faozi, J Jamari, AP Bayuseno, W Sumbodo, K Huda

📚 AIP Conference Proceedings 3354 (1), 030008, 2025

2025

451

Study on the Effect of Laser Cleaning Power and Scanning Frequency on Surface Properties and Coating Adhesion of ASTM A36 Steel.

Google Scholar

👨‍🔬 ES Hadi, A Fidaus, U Budiarto, MR Caesar Putra Hadi, M Tauviqirrahman, ...

📚 Tribology in Industry 47 (4), 732, 2025

2025

452

Effect of Micro-Separations and Cup Inclination Angles influencing Contact Mechanics of PCD-PCD for Hip Resurfacing using Elevated Acetubular Cup Rim Design for Various Gait Loads

Google Scholar

👨‍🔬 R Nithyaprakash, V Naveen, SS Kumar, SS Mahendran, KK Maruthu, ...

📚 PMRP Journal of Research–Part A: Computational Engineering, 2025

2025

453

KARAKTERISASI PELAPISAN ELEKTRODEPOSISI ZN-ZNO DAN CACO3 KOMPOSIT PADA BAJA AISI 1010

Google Scholar

👨‍🔬 KH Pamungkas, AP Bayuseno, J Jamari

📚 JURNAL TEKNIK MESIN 13 (3), 277-284, 2025

2025

454

Finite Element Analysis of SS316L Mandibular Implant Fabricated Using Metal Fused Filament Fabrication

Google Scholar

👨‍🔬 YKP Saleh, R Ismail, J Jamari, IN Jujur

📚 2025 IEEE International Biomedical Instrumentation and Technology Conference …, 2025

2025

455

A new approach of response surface-based goal programming model for additive manufacturing optimization in the biomedical field

Google Scholar

👨‍🔬 LPS Hartanti, R Ismail, J Jamari, AP Bayuseno

📚 Cogent Engineering 12 (1), 2524445, 2025

2025

456

Porous Structures Simulation Analysis: The Effect of Different Strut Geometry on the Bone Scaffold

Google Scholar

👨‍🔬 R Winarso, R Ismail, PW Anggoro, J Jamari, AP Bayuseno

📚 Lecture Notes in Mechanical Engineering 307879, 103-112, 2024

2024

457

The Posterior Tibial Slope Effect to Gap Difference on a Single Radius System for Total Knee Arthroplasty Based on the Computer-Aided Design Approach

Google Scholar

👨‍🔬 D Darmanto, R Novriansyah, R Ismail, J Jamari, AP Bayuseno, ...

📚 Lecture Notes in Mechanical Engineering 307879, 1-11, 2024

2024

458

Analysis of Distinct Substrate Pre-treatment Effects on Flame-Sprayed Hydroxyapatite Coating

Google Scholar

👨‍🔬 RB Taqriban, PS Ramadhan, J Jamari, R Ismail, AP Bayuseno

📚 Lecture Notes in Mechanical Engineering 307879, 593-602, 2024

2024

459

ANALISIS VON MISES STRESS PADA BIOMATERIAL PENGGANTI DISKUS INTERVERTEBRALIS MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 SY Sinarpaska, S Nugroho, J Jamari

📚 JURNAL TEKNIK MESIN 12 (2), 83-88, 2024

2024

460

STUDI PENDAHULUAN REKONSTRUKSI DAN MESH TULANG LUMBAR 1 SAMPAI 2 MENGGUNAKAN METODE FINITE ELEMENT

Google Scholar

👨‍🔬 IN Arif, S Nugroho, J Jamari

📚 JURNAL TEKNIK MESIN 12 (2), 103-106, 2024

2024

461

Contact Pressure Analysis of Dual Mobility Cup for Asians on Various

Google Scholar

👨‍🔬 T Hidayat, R Ismail, M Tauviqirrahman, E Saputra, MDP Lamura, ...

📚 Proceedings of the 9th International Conference and Exhibition on …, 2024

2024

462

Development of CaCO3 novel morphology through crystal lattice modification assisted by sulfate incorporation and vibration

Google Scholar

👨‍🔬 W Mangestiyono, J Jamari, AP Bayuseno, S Muryanto

📚 Communications in Science and Technology 9 (1), 192-198, 2024

2024

463

ANALISIS PENGARUH GEOMETRI MODEL PADA MEKANIKA KONTAK ASPERITAS BENTUK SINUSOIDAL MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 MN Afi, S Nugroho, J Jamari

📚 JURNAL TEKNIK MESIN 12 (3), 63-67, 2024

2024

464

ANALISIS VON MISES STRESS PADA TULANG CANCELLOUS LUMBALIS 1 SAMPAI LUMBALIS 2 DENGAN KONDISI PEMBEBANAN BERBEDA MENGGUNAKAN ELEMEN HINGGA

Google Scholar

👨‍🔬 AM Pahlevi, B Setiyana, J Jamari

📚 JURNAL TEKNIK MESIN 12 (3), 353-358, 2024

2024

465

REKONSTRUKSI DISKUS INTERVERTEBRALIS LUMBALIS 1 DAN LUMBALIS 2 MENGGUNAKAN APLIKASI SOLIDWORKS

Google Scholar

👨‍🔬 RFB Wahyudi, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 12 (3), 226-229, 2024

2024

466

REKONSTRUKSI DAN ANALISIS TEGANGAN VON MISES PADA VERTEBRA LUMBALIS 4 HINGGA SACRALIS 1 TERHADAP VARIASI INDEKS MASSA TUBUH

Google Scholar

👨‍🔬 LJ Rama, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 12 (3), 25-28, 2024

2024

467

STUDI PENDAHULUAN DALAM OPTIMALISASI REKONSTRUKSI DAN ANALISIS MEKANIKA KONTAK LUMBAR SPINE (L1-L2)

Google Scholar

👨‍🔬 M Bilal, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 12 (3), 29-34, 2024

2024

468

Simulation of Torque, Tip Speed Ratio, Power, and Power Coefficient of 1 MW Horizontal Axis Wind Turbine in Modified NACA 4412-2412 Variation of Airfoil Blades

Google Scholar

👨‍🔬 MM Munir, DH Al-Janan, S Anis, RF Naryanto, A Hangga, W Sumbodo, ...

📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 120 (2 …, 2024

2024

469

ANALISIS GEOMETRI FEMORAL HEAD TERHADAP TEKANAN KONTAK PCD-PCD HIP JOINT PROSTHESIS

Google Scholar

👨‍🔬 SA Shiddiq, J Jamari, AP Bayuseno, MI Ammarullah

📚 JURNAL TEKNIK MESIN 12 (4), 63-68, 2024

2024

470

PERILAKU MULUR (CREEP) POLIPROPILEN DENGAN PERUBAHAN TEGANGAN DAN TEMPERATUR

Google Scholar

👨‍🔬 M Iman, AP Bayuseno, J Jamari

📚 PROSIDING, 2023

2023

471

Control Design of Automatic Inflatable Vest for Deep Pressure Therapy

Google Scholar

👨‍🔬 F Husaini, M Maula, M Ammarullah, I Afif, MD Lamura, TI Winarni, ...

📚 ROTASI 26 (1), 28-34, 2023

2023

472

REKONSTRUKSI DAN PENGUKURAN PARAMETER ATROPOMETRI TULANG VERTEBRA LUMBALIS 1 HINGGA SACRALIS 1

Google Scholar

👨‍🔬 D Paramartha, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 11 (1), 132-135, 2023

2023

473

ANALISIS SISTEM KONTAK GIGI MANUSIA DENGAN KONDISI OVERBITE DENGAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 TE Gloriarista, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 11 (1), 166-169, 2023

2023

474

STUDI DAN PEMODELAN KONTAK ASPERITIES ELASTIK-PLASTIK MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 HA Ginting, J Jamari, AP Bayuseno

📚 JURNAL TEKNIK MESIN 11 (2), 139-144, 2023

2023

475

Comparative analysis of the effects of surface texture and boundary slip on the tribological properties of lubricated sliding contacts

Google Scholar

👨‍🔬 M Tauviqirrahman, A Greggy, Muchammad, Jamari, B Setyana, ...

📚 3rd Borobudur International Symposium on Science and Technology 2021 2706 (1 …, 2023

2023

476

3-D hydrodynamic analysis of artificial slip effects on micro textured thrust bearing to improve the hydrodynamic lubrication performance

Google Scholar

👨‍🔬 Muchammad, BFT Kiono, M Tauviqirrahman, K Agustan, B Setiyana, ...

📚 3rd Borobudur International Symposium on Science and Technology 2021 2706 (1 …, 2023

2023

477

Contact pressure on CoCrMo-on-CoCrMo bearing of total hip arthroplasty under normal walking condition using 2D finite element approach

Google Scholar

👨‍🔬 MI Ammarullah, IY Afif, MI Mula, TI Winarni, M Tauviqirrahman, ...

📚 THE 6TH INTERNATIONAL CONFERENCE ON ENERGY, ENVIRONMENT, EPIDEMIOLOGY AND …, 2023

2023

478

The effect of sliding velocity on friction of rubber in contact with a rigid spherical counter surface: A numerical investigation

Google Scholar

👨‍🔬 B Setiyana, J Jamari, R Ismail, DJ Schipper

📚 PROCEEDINGS OF 2ND INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY (I-CoRE 2021 …, 2023

2023

479

Von Mises stress evaluation of CoCrMo-on-CoCrMo bearing in total hip replacement during normal walking using 2D finite element strategy

Google Scholar

👨‍🔬 MI Ammarullah, IY Afif, MI Maula, TI Winarni, M Tauviqirrahman, ...

📚 TOWARD ADAPTIVE RESEARCH AND TECHNOLOGY DEVELOPMENT FOR FUTURE LIFE 2689 (1 …, 2023

2023

480

PENGARUH DEEP PRESSURE TERHADAP KONDUKTANSI KULIT ANAK SEKOLAH DASAR DENGAN MENGGUNAKAN SENSOR FISOLOGIS GALVANIC SKIN RESPONSE

Google Scholar

👨‍🔬 R Pramuditya, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 11 (3), 360-363, 2023

2023

481

PENGARUH DEEP PRESSURE VEST TERHADAP PENURUNAN STRES KOGNITIF MENGGUNAKAN ELECTROENCEPHALOGRAM (EEG) PADA ANAK SKOLAH DASAR

Google Scholar

👨‍🔬 AI Mursyd, J Jamari, TI Winarni

📚 JURNAL TEKNIK MESIN 11 (3), 364-367, 2023

2023

482

Machine Learning Methods for Identification Osteoarthritis: A Bibliometric Analysis and General Review

Google Scholar

👨‍🔬 F Muttaqin, I Yuniar Purbasari, A Priharyoto Bayuseno, T Indah Winarni, ...

📚 E3S Web of Conferences 448, 02009, 2023

2023

483

Contact Pressure Analysis of Dual Mobility Cup for Asians on Various Head-To-Liner Ratios

Google Scholar

👨‍🔬 T Hidayat, R Ismail, M Tauviqirrahman, E Saputra, MDP Lamura, ...

📚 International Conference and Exhibition on Sustainable Energy and Advanced …, 2023

2023

484

Understanding Hip Contact Stress Based on Hip Morphometry and Types of Physical Activity: A Systematic Review

Google Scholar

👨‍🔬 A Indra, TI Winarni, A Pramono, J Jamari, T Kamarul, A Syahrom

2023

485

Effect of withdrawal speed variations on coating quality of electrophoretically deposited biogenic hydroxyapatite on AISI 316L

Google Scholar

👨‍🔬 RB Taqriban, J Jamari, R Ismail, AP Bayuseno

📚 IOP Conference Series: Earth and Environmental Science 1268 (1), 012068, 2023

2023

486

Optimization of the Additive Manufacturing Parameters of Polylactic Acid Interference Screw on Dimensional Accuracy

Google Scholar

👨‍🔬 LPS Hartanti, B Bawono, T Yuniarto, J Mulyono, JJ Nauolim, R Ismail, ...

📚 International Conference on Intelligent Technologies, 327-336, 2023

2023

487

Analysis of an Axial Permanent Magnetic Bearing for 1MW Horizontal Axis Wind Turbine

Google Scholar

👨‍🔬 RF Naryanto, R Prasdiansyah, DH Al-Janan, W Aryadi, A Roziqin, S Anis, ...

📚 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 94 (1 …, 2022

2022

488

Chairless Chairs for Orthopedic Surgery Purpose–A Literature Review. Open Access Maced J Med Sci. 2022 Feb 07; 10 (F): 146-152

Google Scholar

👨‍🔬 G Santoso, S Sugiharto, A Mughni, MI Ammarullah, AP Bayuseno, ...

2022

489

of Metal-on-Metal Total Hip Implant with Different Materials Subjected to Gait Loading. Metals 2022, 12, 1241

Google Scholar

👨‍🔬 J Jamari, MI Ammarullah, G Santoso, S Sugiharto, T Supriyono, ...

📚 s Note: MDPI stays neutral with regard to jurisdictional claims in published …, 2022

2022

490

Optimisation of cutting parameters of new material orthotic insole using a Taguchi and response surface methodology approach

Google Scholar

👨‍🔬 PW Anggoro, Y Purharyono, AA Anthony, M Tauviqirrahman, ...

📚 Alexandria Engineering Journal, 2022

2022

491

EVALUASI UKURAN FEMORAL HEAD PADA BANTALAN CERAMIC-ON-CERAMIC HIP JOINT PROSTHESIS

Google Scholar

👨‍🔬 A Nugroho, J Jamari, AP Bayuseno, MI Ammarullah

📚 JURNAL TEKNIK MESIN 10 (1), 7-12, 2022

2022

492

ELECTROPHORETIC DEPOSITION OF Ti6Al4V HYDROXYAPATITE COATING: ELECTRODE DISTANCE AND OPERATING TIME CHANGES

Google Scholar

👨‍🔬 RB Taqriban, R Ismail, J Jamari, AP Bayuseno

📚 ARPN Journal of Engineering and Applied Sciences 17 (15), 1474-1479, 2022

2022

493

Reverse engineering (RE) for designing insole shoe orthotics leading an accurate dimensional size for patients with a deformed foot

Google Scholar

👨‍🔬 AP Anggoro, P.W., Wicaksono, A., Jamari, J., Bayuseno

📚 ARPN Journal of Engineering and Applied Sciences 16 (2), 142-150, 2021

2021

494

Morphology of barite precipitated from induced flow vibration and the presence of chemical additives

Google Scholar

👨‍🔬 AP Karaman, N., Mangestiyono, W., Muryanto, S., Jamari, J., Bayuseno

📚 Rasayan Journal of Chemistry 14 (1), 466-472, 2021

2021

495

Effect of the Optimized Temperature and pH Solution on the Crystallization of Struvite

Google Scholar

👨‍🔬 DS Perwitasari, SS Santi, AP Bayuseno, J Jamari, S Muryanto

📚 IOP Conference Series: Materials Science and Engineering 1125 (1), 012091, 2021

2021

496

Study of Wear on the Metal on Polycarbonate Urethane (PCU) Contact in Total Hip Arthroplasty Using Finite Element Method

Google Scholar

👨‍🔬 WD Lestari, L Edahwati, N Adyono, R Ismail, J Jamari, AP Bayuseno

📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021

2021

497

Analysis of Lubrication Performance of Thrust Bearing with Texture Height Variation and Cavitation Modelling with CFD Simulation

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, H Nurahman, J Jamari

📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021

2021

498

Effect of Rubber Deformation Along Sliding Contact on Its Stress and Friction Force: A Numerical Investigation

Google Scholar

👨‍🔬 B Setiyana, R Ismail, J Jamari

📚 2nd Borobudur International Symposium on Science and Technology (BIS-STE …, 2021

2021

499

Sendi panggul buatan bipolar untuk memudahkan gerakan salat pasien (Bipolar artificial hip joint for patient performing salat)

Google Scholar

👨‍🔬 J Jamari, E Saputra, IB Anwar

📚 Eko Saputra, 105, 2021

2021

500

Conference Paper G

Google Scholar

👨‍🔬 J Jamari, E Saputra

📚 Eko Saputra, 2021

2021

501

Study of Struvite Crystal Growth with The Addition of Tartaric Acid

Google Scholar

👨‍🔬 D Suci Perwitasari, S Soraya Santi, S Muryanto, J Jamari, AP Bayuseno

📚 E3S Web of Conferences 328, 01003, 2021

2021

502

Fabrication with Compression Molding

Google Scholar

👨‍🔬 WD Lestari, R Ismail, J Jamari, AP Bayuseno

📚 Recent Advances in Manufacturing Engineering and Processes: Proceedings of …, 2021

2021

503

Fiber-Reinforced polymer composite for use of a blade runner’s artificial leg of lower-limb amputees

Google Scholar

👨‍🔬 AP Bayuseno, A Pratama, R Ismail, J Jamari

📚 ARPN Journal of Engineering and Applied Sciences 16 (23), 2508-2513, 2021

2021

504

Effects of Metal Oxides on the Crystallization of BaSo4 in a Vibrated Batch Crystallizer System

Google Scholar

👨‍🔬 N Karaman, S Muryanto, J Jamari, AP Bayuseno

📚 INTERNATIONAL JOURNAL OF ENGINEERING 9 (3), 3232-3236, 2020

2020

505

Effect of Slip Placement on the Performance of Textured Sliding Contact by CFD

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, J Jamari, MM Suryaman

📚 Proceedings of the 6th International Conference and Exhibition on …, 2020

2020

506

Ankle Foot Orthotic (AFO) for Deformity Patients: The Design and Manufacturing of Shoes Orthotics

Google Scholar

👨‍🔬 PW Anggoro, B Bawono, T Yuniarto, J Jamari, AP Bayuseno

📚 Proceedings of the 6th International Conference and Exhibition on …, 2020

2020

507

Numerical Investigation of the Sliding Contact of Tire Rubber Material Due to a Blade Sliding Indentation

Google Scholar

👨‍🔬 B Setiyana, J Jamari, R Ismail, S Sugiyanto, E Saputra

📚 Proceedings of the 6th International Conference and Exhibition on …, 2020

2020

508

Modifikasi Persamaan Keausan Hip Prosthesis dengan Mempertimbangkan Koefisien Gesek

Google Scholar

👨‍🔬 E Saputra, IB Anwar, J Jamari

📚 Jurnal Rekayasa Mesin 15 (2), 99-106, 2020

2020

509

The contact analysis of body and cover coconut shell pen using abaqus

Google Scholar

👨‍🔬 B Yulianto, G Kurnia, J Jamari, AP Bayuseno, M Tauviqirrahman

📚 AIP Conference Proceedings 2262 (1), 040001, 2020

2020

510

For Children with Autism: Designing, Manufacturing and Testing the Universal Therapeutic Mattress

Google Scholar

👨‍🔬 SH Suryo, MH Setiawan, J Jamari, AP Bayuseno

📚 ARPN Journal of Engineering and Applied Sciences 14 (11), 3538-3548, 2019

2019

511

Optimization of Surface Roughness and Machining Time of Manufacturing for Ankle Foot Orthosis (AFO) with Subtractive Manufacturing using the Taguchi Method and Fuzzy Logic

Google Scholar

👨‍🔬 B Bawono, PW Anggoro, M Tauviqirrahman, J Jamari, AP Bayuseno, ...

📚 ARPN Journal of Engineering and Applied Sciences 14 (10), 3179-3193, 2019

2019

512

Optimization and Controlling of FeCO3 Scale Deposition on the Piping System with Laminar Flow and in The Presence of Zeolite Absorbance

Google Scholar

👨‍🔬 S Raharjo, S Muryanto, J Jamari, AP Bayuseno

📚 IOP Conference Series: Materials Science and Engineering 494 (1), 012023, 2019

2019

513

Hydrodynamic performance of square shape textured parallel sliding contacts considering fluid-solid interfacial slip

Google Scholar

👨‍🔬 M Tauviqirrahman, F Hilmy, Muchammad, J Jamari

📚 AIP Conference Proceedings 2097 (1), 030056, 2019

2019

514

Identifikasi Tegangan pada Permukaan Karet SBR-25 saat mengalami Kontak Abrasi: Investigasi Numerik

Google Scholar

👨‍🔬 B Setiyana, J Jamari, H Ismoyo, M Munadi

📚 Jurnal Teknik Mesin Indonesia 14 (2), 72-77, 2019

2019

515

Puzzle Islamic Floral Patterns Product Tiles forWall and Ceiling to Decorate of Al Huda Mosque Indonesia—Design, Manufacturing, and Fabrication

Google Scholar

👨‍🔬 PW ANGGORO, AT YUNIARTO, M Tauviqirrahman, J Jamari, ...

2019

516

REDESAIN BALING-BALING KAPAL NELAYAN BERDAUN 4 (EMPAT) DI SALAH SATU GALANGAN KAPAL DI TEGAL JAWA TENGAH

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, D Mulyana, F Firdaus, J Jamari

📚 Marine Fisheries 10 (2), 187-192, 2019

2019

517

CaSO4 Scale Formation on Vibrated Piping System in the Presence Citric Acid

Google Scholar

👨‍🔬 W Mangestiyono, J Jamari, S Muryanto, AP Bayuseno

📚 E3S Web of Conferences 31, 01001, 2018

2018

518

The Contact Simulation Comparison of UHMWPE to the Crosslink Intensity Effect

Google Scholar

👨‍🔬 RAN Al Hakim, S Arrohman, E Saputra, IB Anwar, J Jamari, R Ismail, ...

📚 E3S Web of Conferences 73, 12014, 2018

2018

519

Study of Sensor Deflection in Hip Simulator: Numerical and Experimental Method

Google Scholar

👨‍🔬 T Towijaya

📚 E3S Web of Conferences, 2018

2018

520

Mass Transfer of Magnesium Chloride to Magnesium Ammonium Phosphate in a Stirring Reactor

Google Scholar

👨‍🔬 S Sutiyono, N Firdayanti, AH Diticahyani, L Edahwati, AP Bayuseno, ...

📚 Proceedings of ICST 2018 1, 59-61, 2018

2018

521

Pemodelan Galloping Sebagai Media Energy Harvester Dengan Tipbody Berbentuk Triangular Menggunakan Piezoelectric

Google Scholar

👨‍🔬 Y Anwar, I Haryanto, A Widodo, J Jamari

📚 ROTASI 20 (2), 102-109, 2018

2018

522

Calcium carbonate scale on pipes: Analysis of kinetic, mass, polymorphism, morphology with chemical inhibitor

Google Scholar

👨‍🔬 S Raharjo, S Muryanto, J Jamari, AP Bayuseno

📚 Journal of Engineering and Applied Sciences 13 (20), 8579-8583, 2018

2018

523

3D Numerical study on the effect of shaft eccentricity on the tribological performance of lubricated sliding contact

Google Scholar

👨‍🔬 JJ Mohammad Tauviqirrahman, Bayu Kurniawan

📚 MATEC Web of Conferences 159 (02042), 2018

2018

524

Study of Wear on Compression Molding UHMWPE Liner Surface with Crosslink & Non-Crosslink Experimental Method

Google Scholar

👨‍🔬 FS Wicaksono, E Saputra, R Ismail, M Tauviqirrahman, J Jamari, ...

📚 3rd INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL FOR BETTER FUTURE 2018 …, 2018

2018

525

Meningkatkan Nilai Guna Buah Naga Melalui Pengolahan Bagiak Naga di Desa Karangmulyo Kecamatan Tegalsari Kabupaten Banyuwangi

Google Scholar

👨‍🔬 M Mamlukhah, J Jamari, M Annas, M Maskur

📚 LOYALITAS: Jurnal Pengabdian Kepada Masyarakat 1 (1), 31-40, 2018

2018

526

Kinetics and morphology analysis of struvite precipitated from aqueous solution under the inﬂuence of heavy metals: Cu 2+ 2+ 2+, Pb, Zn

Google Scholar

👨‍🔬 DS Perwitasari, S Muryanto, J Jamari, AP Bayuseno

📚 Journal of Environmental Chemical Engineering 6, 2017

2017

527

Pengaruh Kompensasi dan Motivasi terhadap Prestasi Kerja Karyawan IAI Darussalam Blokagung Banyuwangi Tahun 2015/2016

Google Scholar

👨‍🔬 J Jamari

📚 PROSIDING 1 (3), 347-362, 2017

2017

528

The beneficial effect of slip on the hydrodynamic lubrication in the lubricated sliding contact

Google Scholar

👨‍🔬 Susilowati, M Tauviqirrahman, J Jamari, AP Bayuseno

📚 AIP Conference Proceedings 1831 (1), 020043, 2017

2017

529

Geometrical Analysis of Artificial Rough Surfaces: Mathematical and CAD Model

Google Scholar

👨‍🔬 GA Sipayung, E Saputra, R Ismail, J Jamari, AP Bayuseno

📚 Advanced Science Letters 23 (12), 12325-12329, 2017

2017

530

Formation and Controlling of Struvite Crystals Using a Novel-Vertical Reactor: Study on Purity and Morphology Variation

Google Scholar

👨‍🔬 L Edahwati, S Sutiyono, S Muryanto, J Jamari, AP Bayuseno

📚 Advanced Science Letters 23 (12), 12247-12251, 2017

2017

531

Comparative Analysis Using Cavitation and No-Cavitation Models for Lubricated Journal Bearing: A Study Case of Effect of Radial Velocity

Google Scholar

👨‍🔬 M S. Susilowati, Brain Choirul Ichsan, Mohammad Tauviqirrahman, Jamari, A. P ...

📚 Advanced Science Letters 23 (12), 12322-12324, 2017

2017

532

The beneficial effect of superhydropobic layer addition on lubrication behavior in bearing application

Google Scholar

👨‍🔬 Muchammad, M Tauviqirrahman, AW Pratomo, J Jamari, DJ Schipper

📚 AIP Conference Proceedings 1725 (1), 020047, 2016

2016

533

A numerical investigation on mechanical property improvement of styrene butadine rubber by static straight blade indentation

Google Scholar

👨‍🔬 B Setiyana, R Ismail, J Jamari, DJ Schipper

📚 AIP Conference Proceedings 1725 (1), 020078, 2016

2016

534

Influence of superoleophobic layer on the lubrication performance of partially textured bearing including cavitation

Google Scholar

👨‍🔬 M Tauviqirrahman, AP Bayuseno, Muchammad, J Jamari

📚 AIP Conference Proceedings 1725 (1), 020091, 2016

2016

535

Theoretical Investigation of Texture Depth Effect on the Lubrication Performance in Slip Pocketed Bearing Including Cavitation

Google Scholar

👨‍🔬 M Muchammad, M Tauviqirrahman, AW Pratomo, J Jamari, DJ Schipper

📚 MYRIBOS 2015, 251-252, 2015

2015

536

The Effect of Component Thickness on the Flattening of Surface Asperities

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 Jurnal Teknologi 77 (1), 119-125, 2015

2015

537

Finite element analysis of a two layer viscoelastic material in contact with a flat punch

Google Scholar

👨‍🔬 PW Anggoro, B Bawono, J Jamari, AP Bayuseno

📚 Proceedings of Malaysian International Tribology Conference 2015, 70-71, 2015

2015

538

Finite element modeling of the contact between an insole shoe and a ballnose cutter milling

Google Scholar

👨‍🔬 B Bawono, PW Anggoro, J Jamari, AP Bayuseno

📚 Proceedings of Malaysian International Tribology Conference 2015, 66-67, 2015

2015

539

Numerical analysis for cavitation flow of marine propeller

Google Scholar

👨‍🔬 M Tauviqirrahman, Muchammad, R Ismail, J Jamari

📚 AIP Conference Proceedings 1699 (1), 050011, 2015

2015

540

Modified Design of Pin-on-Ring Tribometer for Hip Joint Prostheses Measurement; Case Study on Salat Activity

Google Scholar

👨‍🔬 M Khafidh, J Jamari, S Sulardjaka, M Tauviqirrahman, E Heide

📚 Makara Journal of Technology 18 (3), 7, 2014

2014

541

PERANCANGAN AUTISM MOBILE SEAT UNTUK ALAT BANTU TERAPI AUTISME

Google Scholar

👨‍🔬 GK Naufal, A Raswan, SH Suryo, J Jamari, I Haryanto

📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2013

2013

542

PERANCANGAN MESIN PELUK (HUG MACHINE) SEBAGAI PERANGKAT TERAPI AUTISME

Google Scholar

👨‍🔬 A Raswan, SH Suryo, J Jamari, I Haryanto

📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2013

2013

543

PERANCANGAN MESIN PEMELUK (HUG MACHINE) JENIS INFLATING WRAP UNTUK ALAT BANTU TERAPI AUTISME

Google Scholar

👨‍🔬 SH Suryo, A Raswan, J Jamari, I Haryanto

📚 Prosiding Sains Nasional dan Teknologi 1 (1), 2013

2013

544

Perbandingan Standar Nasional Indonesia (SNI) terhadap Standar Internasional pada Produk Biomedical Implant Plate

Google Scholar

👨‍🔬 B Setiyana, M Khafidh, R Ismail, J Jamari

📚 The 1st Conference on Information Technology, Computer and Electrical …, 2013

2013

545

Pengujian Bearing Pompa Sentrifugal untuk Nelayan Produk Industri Kecil dan Menengah

Google Scholar

👨‍🔬 J Jamari

📚 Semantik 3 (1), 2013

2013

546

Sliding Wear Modeling of Artificial Rough Surfaces

Google Scholar

👨‍🔬 S Imam, S Budi, M Muchammad, J Jamari

📚 International Journal of Science and Engineering 4 (1), 21-23, 2013

2013

547

Pemodelan Keausan Steady State: Analitik, FEA, dan Eksperimen

Google Scholar

👨‍🔬 I Syafa, SA Widyanto, J Jamari, R Ismail

📚 Jurnal Rekayasa Mesin 7 (3), 75-81, 2012

2012

548

Computational Analysis of Wall Slip and Cavitation in Lubricated Sliding Systems

Google Scholar

👨‍🔬 S DJ

2012

549

PENGARUH TEGANGAN GESER KRITIS TERHADAP PERFORMANSI PELUMASAN PADA MICRO-SLIDER BEARING DENGAN PERMUKAAN SLIP

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, JJ Jamari, DJ Schipper

📚 Semantik 2011 1 (1), 56-62, 2011

2011

550

ANALISIS PENGARUH PEMBEBANAN TERHADAP TEGANGAN DALAM SAMBUNGAN TULANG PINGGUL BUATAN DENGAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 SS Sugiyanto, M Tauviqirrahman, R Ismail, JJ Jamari

📚 Semantik 1 (1), 2011

2011

551

Pengaruh Pelumasan Terhadap Deformasi Plastis Pada Kontak Dua Benda

Google Scholar

👨‍🔬 BS Hardjuno, JD Setiawan, R Ismail, J Jamari

📚 Jurnal Momentum UNWAHAS 7 (1), 114943, 2011

2011

552

Analisa Kontak Ceramic-on-Crosslinked Uhmwpe Pada Sambungan Tulang Pinggul Buatan Menggunakan Metode Elemen Hingga

Google Scholar

👨‍🔬 R Winarso, J Jamari, I Haryanto

📚 Jurnal Momentum UNWAHAS 7 (1), 138334, 2011

2011

553

Comparison of the extended Reynolds equation with slip length model and two-slip model: an Investigation of load support improvement in lubricated MEMS (CD)

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 ICE-SEAM 2011: Proceeding of International Conference and Exhibition …, 2011

2011

554

Prediction of the running-in phase on rolling-sliding contact

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, J Jamari, DJ Schipper

📚 ICE-SEAM 2011: Proceeding of International Conference and Exhibition …, 2011

2011

555

Pemodelan Keausan Pin-on-disc Dengan Analisa Elemen Hingga

Google Scholar

👨‍🔬 I Syafaâ, J Jamari, SA Widyanto, R Ismail

📚 Jurnal Ilmiah Momentum 7 (2), 2011

2011

556

Optimization of partial slip surface at lubricated-MEMS

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, DJ Schipper, J Jamari

📚 2011 2nd International Conference on Instrumentation Control and Automation …, 2011

2011

557

PEMODELAN KONTAK ELASTIS-PLASTIS ANTARA SEBUAH BOLA DENGAN SEBUAH PERMUKAAN KASAR (ROUGH SURFACE) MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 AY YUWONO, J JAMARI

📚 Mechanical Engineering Departement of Diponegoro University, 2010

2010

558

PREDIKSI TEGANGAN VON MISSES DAN TEKANAN KONTAK TOTAL KNEE REPLACEMENT (TKR) SELAMA PROSES GAIT CYCLE MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 T ARIFIYANTO, J JAMARI

📚 Mechanical Engineering Departement of Diponegoro University, 2010

2010

559

ANALISA KONTAK MULTIPLE ASPERITY-TO-ASPERITY MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 TP LESTARI, J JAMARI

📚 Mechanical Engineering Departement of Diponegoro University, 2010

2010

560

PERBANDINGAN DEFORMASI PLASTIS SAAT UNLOADING PADA KONTAK ANTAR HEMISPHERES DENGAN VARIASI BEBAN DAN RADIUS MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 T PRASOJO, J JAMARI

📚 Mechanical Engineering Departement of Diponegoro University, 2010

2010

561

ANALISA PENGARUH GESEKAN PADA KONTAK SLIDING ANTAR SILINDER MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 A DANANG, J JAMARI

📚 Mechanical Engineering Departement of Diponegoro University, 2010

2010

562

Alternating direction implicit method for solving modified Reynolds equation in a lubricated sliding contact

Google Scholar

👨‍🔬 J Jamari, E Saputra, R Ismail, M Tauviqirrahman, DJ Schipper

📚 National Seminar-Science and Technology, Faculty of Engineering, University …, 2010

2010

563

The Effect of Roughness Texture on the Skin Friction of Micro-Textured Surface

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 8th ASEAN ANSYS Conference 2010, Singapore: Smart Engineering For A …, 2010

2010

564

ANALISA KINEMATIKA DAN KINETIKA PADA PERANCANGAN CONTAINER CRANE KAPASITAS 40 TON

Google Scholar

👨‍🔬 P PARYANTO, S SUGIYANTO, J JAMARI

📚 Diponegoro University, 2009

2009

565

Frictional and Frictionless Contact Simulation of a Cylinder on a Flat Using Finite Element Method

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 ICAME: Proceedings of International Conference on Advances Mechanical …, 2009

2009

566

Running-in and Its Impacts on a Mechanical System

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 Prosiding SNTTM VIII Universitas Diponegoro, 2009

2009

567

The Finite Element Study of Static Contact on Multilayered Solids

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, J Jamari, DJ Schipper

📚 NAE 2009: The 6th International Conference on Numerical Analysis in Engineering, 2009

2009

568

A New Model for the Contact of Rough Surfaces

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 ICAME: Proceedings of International Conference on Advances Mechanical …, 2009

2009

569

Finite Element Modeling of Static Contact between Ellipsoid Bodies

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, J Jamari, DJ Schipper

📚 Proceedings of the 2nd International Conference on Green Technology, 265-269, 2009

2009

570

An Elastic-Plastic Running-in Analysis of Rolling Contacts: Model and Experiment

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 Prosiding SNTM 4 UK-Petra, 1-6, 2009

2009

571

Sliding Contact of Ellipsoid Bodies Using Finite Element Analysis

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, DJ Schipper

📚 Proceedings of the 2nd International Conference on Green Technology, 259-263, 2009

2009

572

Controlled running-in for reliable mechanical systems

Google Scholar

👨‍🔬 J Jamari, JD Setiawan, MA Safaruddin, DJ Schipper

📚 ICME2008: Proceedings of the International Conference on Mechanical and …, 2008

2008

573

Contact mechanics based running-in model

Google Scholar

👨‍🔬 J Jamari

📚 Proceedings SNTM3 UK-Petra, 476-481, 2008

2008

574

The effect of firction coefficient on stresses in sliding contact using finite element method

Google Scholar

👨‍🔬 M Tauviqirrahman, R Ismail, J Jamari, BFT Kiono, DJ Schipper

📚 Proceedings SNTM3 UK-Petra, 493-497, 2008

2008

575

Finite element study of stresses due to sliding contact of a cylinder on a flat surface

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, J Jamari, BFT Kiono, DJ Schipper

📚 SNTM2 UT-Petra: Proceedings SNTM2 UT-Petra, 488-492, 2008

2008

576

Deformations, Forces, and Stress Formations Analysis in Sliding Contact Between a Rigid/hard Cylinder on an Elastic-plastic Cylinder

Google Scholar

👨‍🔬 R Ismail, M Tauviqirrahman, BF TK, DJ Schipper

📚 Prosiding Seminar Nasional Teknoin, 2008

2008

577

Running-in of surfaces

Google Scholar

👨‍🔬 J Jamari, DJ Schipper

📚 6th Engineering Mechanics Symposium, EM 2003, 2003

2003

578

Perancangan Dan Pembuatan Alat Keramas Portable Untuk Pasien Rumah Sakit Dengan Metode Morfologi

Google Scholar

👨‍🔬 J Jamari, AV Yolanda

📚 J@ ti Undip: Jurnal Teknik Industri 9 (2), 105-108, 0

579

PEMODELAN ELEMEN HINGGA KONTAK SLIDING BERULANG ANTARA BOLA DENGAN PERMUKAAN KASAR

Google Scholar

👨‍🔬 J Jamari

📚 ROTASI 15 (3), 14-18, 0

580

PENINGKATAN KINERJA ALAT PENGANGKAT SEPEDA MOTOR DENGAN SISTEM PNEUMATIK HIDROLIK

Google Scholar

👨‍🔬 H Saptono

581

POWER SPECTRAL DENSITY ANALYSIS OF STEEL SURFACE TOPOGRAPHY CHANGE ON A BOUNDARY LUBRICATED RECIPROCATING SLIDING CONTACT

Google Scholar

👨‍🔬 J Jamari

📚 ROTASI 10 (1), 12-16, 0

582

PENGARUH HARGA BEBAN NORMAL TERHADAP DEFORMASI PLASTIS PADA KONTAK DUA BENDA

Google Scholar

👨‍🔬 BS Hardjuno, JD Setiawan, R Ismail, J Jamari

583

MEASUREMENT OF THE SURFACE TOPOGRAPHY CHANGE ON A BOUNDARY LUBRICATED RECIPROCATING SLIDING CONTACT

Google Scholar

👨‍🔬 J Jamari

📚 ROTASI 10 (2), 10-12, 0

584

AN ELASTIC-PLASTIC MICROCONTACT MODEL OF ASPERITIES

Google Scholar

👨‍🔬 J Jamari

📚 ROTASI 8 (2), 14-18, 0

585

ANALISA DEFORMASI FULLY PLASTIC PADA KONTAK ANTAR ASPERITI MENGGUNAKAN METODE ELEMEN HINGGA

Google Scholar

👨‍🔬 S Sugiyanto, J Jamari

📚 ROTASI 12 (4), 6-9, 0

586

STUDY OF THE CHANGE OF STEEL SURFACE TOPOGRAPHY ON A BOUNDARY LUBRICATED RECIPROCATING SLIDING CONTACT

Google Scholar

👨‍🔬 J Jamari

📚 ROTASI 12 (4), 17-21, 0

587

STUDI PENGARUH MATERIAL DAN KETEBALAN TERHADAP PARAMETER-PARAMETER KONTAK PADA SISTEM ARTFICIAL HIP JOINT

Google Scholar

👨‍🔬 S Sugiyanto, J Jamari

📚 ROTASI 12 (3), 1-5, 0

588

FINITE ELEMENT METHOD FOR MODELING OF REAL ROUGH SURFACE

Google Scholar

👨‍🔬 GA Sipayung, R Ismail, J Jamari, AP Bayuseno

589

PENGUJIAN RUNNING-IN PADA KONTAK SLIDING ANTARA BOLA BAJA DENGAN PELAT KUNINGAN

Google Scholar

👨‍🔬 J Jamari, N Supriyana

📚 ROTASI 16 (1), 1-6, 0

590

PENGARUH TEKSTUR PERMUKAAN MATERIAL UHMWPE TERHADAP DISTRIBUSI TEGANGAN PADA BEBAN KONTAK STATIC, ROLLING DAN SLIDING

Google Scholar

👨‍🔬 J Jamari, FH Priyoga

📚 ROTASI 18 (1), 13-17, 0

591

Advanced Modeling of Production Time for Insole Orthotic Clubfoot Shoes Based on Hybrid Taguchi and Response Surface Methodology Approach

Google Scholar

👨‍🔬 PW Anggoro, B Bawono, DB Setyohadi, PK Fergiawan, L Ratnasari, ...

📚 Available at SSRN 4197665, 0

592

Study of an Additional Layer of Cement Mantle Hip Joints for Reducing Cracks (Peer Review)

Google Scholar

👨‍🔬 J JAMARI

📚 -, 0

593

Modified Design of Pin-on-Ring Tribometer for Hip Joint Prostheses Measurement; Case Study on Salat Activity_Turnitin

Google Scholar

👨‍🔬 MK Muhammad Khafidh, J JAMARI, S SULARDJAKA, ...

📚 https://www. turnitin. com/, 0

594

Effect of inertia on the cavitation phenomena of hydrodynamic textured bearings considering slip (lembar review)

Google Scholar

👨‍🔬 J JAMARI

📚 -, 0

595

Modified Design of Pin-on-Ring Tribometer for Hip Joint Prostheses Measurement; Case Study on Salat Activity_Peer Review

Google Scholar

👨‍🔬 MK Muhammad Khafidh, J JAMARI, S SULARDJAKA, ...

📚 Peer Review, 0

596

Materials Today: Proceedings

Google Scholar

👨‍🔬 D Darmanto, R Novriansyah, R Ismail, J Jamari, AP Bayuseno, ...

597

Pengaruh Terapi Deep Pressure Terhadap Ketenangan Siswa Sekolah Dasar: Studi Pendahuluan menggunakan Elektroensefalogram (EEG)

Google Scholar

👨‍🔬 MI Maula, AI Mursyd, R Pramudtya, FA Husaini, IY Afif, TI Winarni, ...

📚 ROTASI 26 (1), 15-20, 0

598

CONTROL OF CALCIUM CARBONATE SCALE FORMED ON A PIPE WITH INDUCING MAGNETIC FIELD AND TARTARIC ACID IN FLOWING WATER

Google Scholar

👨‍🔬 S SUTOMO, W MANGESTIYONO, S MURYANTO, J JAMARI, ...

599

GLOBAL JOURNAL OF ADVANCED ENGINEERING TECHNOLOGIES AND SCIENCES MATERIAL POWER INFLUENCE OF BUCKET TEETH EXCAVATORAISI 4140 USING ABRASIVE WEAR TEST WITH OGOSHI UNIVERSAL HIGH …

Google Scholar

👨‍🔬 SH Suryo, AP Bayuseno, J Jamari, H Kiswanto

600

Biotribological Analysis of Vascular Constriction in Gluteal Skin: Considering Blood as Incompressible Fluid and Implication in Ulcer Formation

Google Scholar

👨‍🔬 MI Maula, M Lamura, BP Mahardika, HA Wicaksono, MI Ammarullah, ...

📚 Bagus Putra and Wicaksono, Hasyid Ahmad and Ammarullah, Muhammad Imam and …, 0

601

Environmental Advances

Google Scholar

👨‍🔬 MA Irfa’i, S Muryanto, A Prihanto, YM Pusparizkita, R Ismail, J Jamari, ...

602

Effects Of Magnetic Field And Citric Acid On Polymorph And Morphology Of Calcium Carbonate Crystallized In A Flow-Water Pipe

Google Scholar

👨‍🔬 S Sutomo, W Mangestiyono, S Muryanto, J Jamari, AP Bayuseno

603

Next Materials

Google Scholar

👨‍🔬 VA Fardilah, I Alkian, YM Pusparizkita, C Aslan, M Tauviqirrahman, ...

604

Results in Surfaces and Interfaces

Google Scholar

👨‍🔬 VA Fardilah, WW Schmahl, YM Pusparizkita, C Aslan, M Tauviqirrahman, ...

605

Stress–Strain Transfer in the Implant–Abutment–Screw System of the Anterior Mandible: Effects of Implant Geometry in an Orthotropic Finite Element Model

Google Scholar

👨‍🔬 K Kriswanto, J Jamari, A Bayuseno

📚 Available at SSRN 6135712, 0

606

Composites Part C: Open Access

Google Scholar

👨‍🔬 NMH Bawono, B Bawono, PW Anggoro, J Jamari

607

Friction Analysis on Scratch Deformation Modes of Visco-Elastic-Plastic Materials

Google Scholar

👨‍🔬 B Setiyana, I Syafaat, J Jamari, DJ Schipper

📚 Reaktor 14 (3), 199-203, 0

608

A method for characterizing running-in of sliding contacts

Google Scholar

👨‍🔬 J Jamari

609

Synthesis of High-Purity Monocalcium Phosphate Monohydrate from Crab Shell Waste

Google Scholar

👨‍🔬 J Jamari, AP Bayuseno

610

Effect of cavitation modelling on the prediction of the lubrication performance using CFD: A case study of journal bearing lubricated with non-newtonian

Google Scholar

👨‍🔬 J Jamari

611

Optimal Design and Fabrication of Shoe Lasts for Ankle Foot Orthotics for Patients With Diabetes

Google Scholar

👨‍🔬 M Tauviqirrahman, J Jamari, AP Bayuseno

612

Phosphate recovery through struvite-family crystals precipitated in the presence of citric acid: mineralogical phase and morphology evaluation

Google Scholar

👨‍🔬 J Jamari

613

Application of Fused Deposition Modeling (FDM) on Bone Scaffold Manufacturing Process: A Review

Google Scholar

👨‍🔬 PW Anggoro, R Winarso, R Ismail, J Jamari, AP Bayuseno

📚 Available at SSRN 4103975, 0

DataCiteX Author Profile

Author Impact Score

4,896

33

131

613

2023

T2

20.17

254.60

7.99

371

Tresca stress simulation of metal-on-me...

Smart Insight Box

Author Impact Score Trend

Most Cited

Yearly Citations

Yearly Citations Chart

Year-wise Citation Share

Top Research Articles

Explore the Global Research Landscape